kernel/linux.git/drivers, branch v3.4.84

SCSI: storvsc: NULL pointer dereference fix

2014-03-24T04:37:08+00:00

commit b12bb60d6c350b348a4e1460cd68f97ccae9822e upstream. If the initialization of storvsc fails, the storvsc_device_destroy() causes NULL pointer dereference. storvsc_bus_scan() scsi_scan_target() __scsi_scan_target() scsi_probe_and_add_lun(hostdata=NULL) scsi_alloc_sdev(hostdata=NULL) sdev->hostdata = hostdata now the host allocation fails __scsi_remove_device(sdev) calls sdev->host->hostt->slave_destroy() == storvsc_device_destroy(sdev) access of sdev->hostdata->request_mempool Signed-off-by: Ales Novak Signed-off-by: Thomas Abraham Reviewed-by: Jiri Kosina Acked-by: K. Y. Srinivasan Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: qla2xxx: Poll during initialization for ISP25xx and ISP83xx

2014-03-24T04:37:07+00:00

commit b77ed25c9f8402e8b3e49e220edb4ef09ecfbb53 upstream. Signed-off-by: Giridhar Malavali Signed-off-by: Saurav Kashyap Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: isci: correct erroneous for_each_isci_host macro

2014-03-24T04:37:07+00:00

commit c59053a23d586675c25d789a7494adfdc02fba57 upstream. In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[] [] __list_add+0x1b/0xc0 Call Trace: [] __mutex_lock_slowpath+0x114/0x1b0 [] mutex_lock+0x1f/0x30 [] sas_disable_events+0x1b/0x50 [libsas] [] sas_unregister_ha+0x18/0x60 [libsas] [] isci_unregister+0x1e/0x40 [isci] [] isci_pci_remove+0x5d/0x100 [isci] [] pci_device_remove+0x3b/0xb0 [] __device_release_driver+0x7f/0xf0 [] driver_detach+0xa8/0xb0 [] bus_remove_driver+0x9b/0x120 [] driver_unregister+0x2c/0x50 [] pci_unregister_driver+0x23/0x80 [] isci_exit+0x10/0x1e [isci] [] SyS_delete_module+0x16b/0x2d0 [] ? do_notify_resume+0x61/0xa0 [] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by: Lukasz Dorau Reviewed-by: Maciej Patelczyk Tested-by: Lukasz Dorau Signed-off-by: Dan Williams Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

SCSI: isci: fix reset timeout handling

2014-03-24T04:37:07+00:00

commit ddfadd7736b677de2d4ca2cd5b4b655368c85a7a upstream. Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Acked-by: Lukasz Dorau Reported-by: David Milburn Reported-by: Xun Ni Tested-by: Xun Ni Signed-off-by: Dan Williams Signed-off-by: James Bottomley Signed-off-by: Greg Kroah-Hartman

can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails

2014-03-24T04:37:07+00:00

commit 7e9e148af01ef388efb6e2490805970be4622792 upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

vmxnet3: fix building without CONFIG_PCI_MSI

2014-03-24T04:37:07+00:00

commit 0a8d8c446b5429d15ff2d48f46e00d8a08552303 upstream. Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann Cc: Neil Horman Cc: Shreyas Bhatewara Cc: "VMware, Inc." Cc: "David S. Miller" Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vmxnet3: fix netpoll race condition

2014-03-24T04:37:07+00:00

commit d25f06ea466ea521b563b76661180b4e44714ae6 upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman CC: Shreyas Bhatewara CC: "VMware, Inc." CC: "David S. Miller" Reviewed-by: Shreyas N Bhatewara Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

drm/radeon/atom: select the proper number of lanes in transmitter setup

2014-03-24T04:37:06+00:00

commit d03874c881a049a50e12f285077ab1f9fc2686e1 upstream. We need to check for DVI vs. HDMI when setting up duallink since HDMI is single link only. Fixes 4k modes on newer asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75223 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 (2BA30001)

2014-03-24T04:37:06+00:00

commit b28a613e9138e4b3a64649bd60b13436f4b4b49b upstream. Via commit 87809942d3fa "libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8" we added a quirk for disks named "ST1000LM024 HN-M101MBB" with firmware revision "2AR10001". As reported on https://bugzilla.redhat.com/show_bug.cgi?id=1073901, we need to also add firmware revision 2BA30001 as it is broken as well. Reported-by: Nicholas Signed-off-by: Michele Baldessari Tested-by: Guilherme Amadio Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

firewire: don't use PREPARE_DELAYED_WORK

2014-03-24T04:37:06+00:00

commit 70044d71d31d6973665ced5be04ef39ac1c09a48 upstream. PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57be8d9 "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by: Tejun Heo Acked-by: Stefan Richter Cc: linux1394-devel@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman