kernel/linux.git/drivers, branch v3.18.94

spi: imx: do not access registers while clocks disabled

2018-02-07T19:07:57+00:00

commit d593574aff0ab846136190b1729c151c736727ec upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc55774 ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by: Stefan Agner Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

usb: uas: unconditionally bring back host after reset

2018-02-07T19:07:57+00:00

commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by: Oliver Neukum Reported-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

usb: f_fs: Prevent gadget unbind if it is already unbound

2018-02-07T19:07:57+00:00

commit ce5bf9a50daf2d9078b505aca1cea22e88ecb94a upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi Cc: Greg KH Cc: Michal Nazarewicz Cc: John Stultz Cc: Dmitry Shmidt Cc: Badhri Cc: Android Kernel Team Signed-off-by: Hemant Kumar [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

USB: serial: simple: add Motorola Tetra driver

2018-02-07T19:07:57+00:00

commit 46fe895e22ab3845515ec06b01eaf1282b342e29 upstream. Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI devices. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Note that these devices do not support the CDC SET_CONTROL_LINE_STATE request (for any interface). Reported-by: Max Schulze Tested-by: Max Schulze Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_edgeport: fix possible sleep-in-atomic

2018-02-07T19:07:57+00:00

commit c7b8f77872c73f69a16528a9eb87afefcccdc18b upstream. According to drivers/usb/serial/io_edgeport.c, the driver may sleep under a spinlock. The function call path is: edge_bulk_in_callback (acquire the spinlock) process_rcvd_data process_rcvd_status change_port_settings send_iosp_ext_cmd write_cmd_usb usb_kill_urb --> may sleep To fix it, the redundant usb_kill_urb() is removed from the error path after usb_submit_urb() fails. This possible bug is found by my static analysis tool (DSAC) and checked by my code review. Signed-off-by: Jia-Ju Bai Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

CDC-ACM: apply quirk for card reader

2018-02-07T19:07:56+00:00

commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: Do not log urb submission errors on disconnect

2018-02-07T19:07:56+00:00

commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: new device id for Chilitag

2018-02-07T19:07:56+00:00

commit d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by: "Chu.Mike [朱堅宜]" Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID

2018-02-07T19:07:56+00:00

[ Upstream commit b77992d2df9e47144354d1b25328b180afa33442 ] When not associated with an AP, wifi device drivers should respond to the SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the behavior expected by dhcpcd. Currently, this driver returns an error code (-1) from the ioctl call, which causes dhcpcd to assume that the device is not a wireless interface and therefore it fails to work correctly with it thereafter. This problem was reported and tested at https://github.com/lwfinger/rtl8188eu/issues/234. Signed-off-by: Larry Finger Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: gadget: don't dereference g until after it has been null checked

2018-02-07T19:07:56+00:00

[ Upstream commit b2fc059fa549fe6881d4c1f8d698b0f50bcd16ec ] Avoid dereferencing pointer g until after g has been sanity null checked; move the assignment of cdev much later when it is required into a more local scope. Detected by CoverityScan, CID#1222135 ("Dereference before null check") Fixes: b785ea7ce662 ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by: Colin Ian King Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman