kernel/linux.git/drivers/xen, branch v5.4.113

xen/events: fix setting irq affinity

2021-04-16T09:46:39+00:00

The backport of upstream patch 25da4618af240fbec61 ("xen/events: don't unmask an event channel when an eoi is pending") introduced a regression for stable kernels 5.10 and older: setting IRQ affinity for IRQs related to interdomain events would no longer work, as moving the IRQ to its new cpu was not included in the irq_ack callback for those events. Fix that by adding the needed call. Note that kernels 5.11 and later don't need the explicit moving of the IRQ to the target cpu in the irq_ack callback, due to a rework of the affinity setting in kernel 5.11. Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen/evtchn: Change irq_info lock to raw_spinlock_t

2021-04-14T06:24:10+00:00

commit d120198bd5ff1d41808b6914e1eb89aff937415c upstream. Unmask operation must be called with interrupt disabled, on preempt_rt spin_lock_irqsave/spin_unlock_irqrestore don't disable/enable interrupts, so use raw_* implementation and change lock variable in struct irq_info from spinlock_t to raw_spinlock_t Cc: stable@vger.kernel.org Fixes: 25da4618af24 ("xen/events: don't unmask an event channel when an eoi is pending") Signed-off-by: Luca Fancellu Reviewed-by: Julien Grall Reviewed-by: Wei Liu Link: https://lore.kernel.org/r/20210406105105.10141-1-luca.fancellu@arm.com Signed-off-by: Boris Ostrovsky Signed-off-by: Greg Kroah-Hartman

xen/events: avoid handling the same event on two cpus at the same time

2021-03-17T16:03:58+00:00

commit b6622798bc50b625a1e62f82c7190df40c1f5b21 upstream. When changing the cpu affinity of an event it can happen today that (with some unlucky timing) the same event will be handled on the old and the new cpu at the same time. Avoid that by adding an "event active" flag to the per-event data and call the handler only if this flag isn't set. Cc: stable@vger.kernel.org Reported-by: Julien Grall Signed-off-by: Juergen Gross Reviewed-by: Julien Grall Link: https://lore.kernel.org/r/20210306161833.4552-4-jgross@suse.com Signed-off-by: Boris Ostrovsky Signed-off-by: Greg Kroah-Hartman

xen/events: don't unmask an event channel when an eoi is pending

2021-03-17T16:03:58+00:00

commit 25da4618af240fbec6112401498301a6f2bc9702 upstream. An event channel should be kept masked when an eoi is pending for it. When being migrated to another cpu it might be unmasked, though. In order to avoid this keep three different flags for each event channel to be able to distinguish "normal" masking/unmasking from eoi related masking/unmasking and temporary masking. The event channel should only be able to generate an interrupt if all flags are cleared. Cc: stable@vger.kernel.org Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework") Reported-by: Julien Grall Signed-off-by: Juergen Gross Reviewed-by: Julien Grall Reviewed-by: Boris Ostrovsky Tested-by: Ross Lagerwall Link: https://lore.kernel.org/r/20210306161833.4552-3-jgross@suse.com [boris -- corrected Fixed tag format] Signed-off-by: Boris Ostrovsky Signed-off-by: Greg Kroah-Hartman

xen/events: reset affinity of 2-level event when tearing it down

2021-03-17T16:03:57+00:00

commit 9e77d96b8e2724ed00380189f7b0ded61113b39f upstream. When creating a new event channel with 2-level events the affinity needs to be reset initially in order to avoid using an old affinity from earlier usage of the event channel port. So when tearing an event channel down reset all affinity bits. The same applies to the affinity when onlining a vcpu: all old affinity settings for this vcpu must be reset. As percpu events get initialized before the percpu event channel hook is called, resetting of the affinities happens after offlining a vcpu (this is working, as initial percpu memory is zeroed out). Cc: stable@vger.kernel.org Reported-by: Julien Grall Signed-off-by: Juergen Gross Reviewed-by: Julien Grall Link: https://lore.kernel.org/r/20210306161833.4552-2-jgross@suse.com Signed-off-by: Boris Ostrovsky Signed-off-by: Greg Kroah-Hartman

xen-scsiback: don't "handle" error by BUG()

2021-02-23T14:02:26+00:00

commit 7c77474b2d22176d2bfb592ec74e0f2cb71352c9 upstream. In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

Xen/gntdev: correct error checking in gntdev_map_grant_pages()

2021-02-23T14:02:26+00:00

commit ebee0eab08594b2bd5db716288a4f1ae5936e9bc upstream. Failure of the kernel part of the mapping operation should also be indicated as an error to the caller, or else it may assume the respective kernel VA is okay to access. Furthermore gnttab_map_refs() failing still requires recording successfully mapped handles, so they can be unmapped subsequently. This in turn requires there to be a way to tell full hypercall failure from partial success - preset map_op status fields such that they won't "happen" to look as if the operation succeeded. Also again use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()

2021-02-23T14:02:26+00:00

commit dbe5283605b3bc12ca45def09cc721a0a5c853a2 upstream. We may not skip setting the field in the unmap structure when GNTMAP_device_map is in use - such an unmap would fail to release the respective resources (a page ref in the hypervisor). Otoh the field doesn't need setting at all when GNTMAP_device_map is not in use. To record the value for unmapping, we also better don't use our local p2m: In particular after a subsequent change it may not have got updated for all the batch elements. Instead it can simply be taken from the respective map's results. We can additionally avoid playing this game altogether for the kernel part of the mappings in (x86) PV mode. This is part of XSA-361. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Stefano Stabellini Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

arm/xen: Don't probe xenbus as part of an early initcall

2021-02-17T09:35:14+00:00

commit c4295ab0b485b8bc50d2264bcae2acd06f25caaf upstream. After Commit 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI"), xenbus_probe() will be called too early on Arm. This will recent to a guest hang during boot. If the hang wasn't there, we would have ended up to call xenbus_probe() twice (the second time is in xenbus_probe_initcall()). We don't need to initialize xenbus_probe() early for Arm guest. Therefore, the call in xen_guest_init() is now removed. After this change, there is no more external caller for xenbus_probe(). So the function is turned to a static one. Interestingly there were two prototypes for it. Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson Signed-off-by: Julien Grall Reviewed-by: David Woodhouse Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen: Fix XenStore initialisation for XS_LOCAL

2021-02-03T22:25:58+00:00

commit 5f46400f7a6a4fad635d5a79e2aa5a04a30ffea1 upstream. In commit 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") I reworked the triggering of xenbus_probe(). I tried to simplify things by taking out the workqueue based startup triggered from wake_waiting(); the somewhat poorly named xenbus IRQ handler. I missed the fact that in the XS_LOCAL case (Dom0 starting its own xenstored or xenstore-stubdom, which happens after the kernel is booted completely), that IRQ-based trigger is still actually needed. So... put it back, except more cleanly. By just spawning a xenbus_probe thread which waits on xb_waitq and runs the probe the first time it gets woken, just as the workqueue-based hack did. This is actually a nicer approach for *all* the back ends with different interrupt methods, and we can switch them all over to that without the complex conditions for when to trigger it. But not in -rc6. This is the minimal fix for the regression, although it's a step in the right direction instead of doing a partial revert and actually putting the workqueue back. It's also simpler than the workqueue. Fixes: 3499ba8198ca ("xen: Fix event channel callback via INTX/GSI") Reported-by: Juergen Gross Signed-off-by: David Woodhouse Reviewed-by: Juergen Gross Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.org Signed-off-by: Juergen Gross Cc: Salvatore Bonaccorso Cc: Jason Andryuk Signed-off-by: Greg Kroah-Hartman