kernel/linux.git/drivers/watchdog, branch v5.4.50

watchdog: da9062: No need to ping manually before setting timeout

2020-06-24T15:50:32+00:00

[ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ] There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter. This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset. Signed-off-by: Stefan Riedmueller Reviewed-by: Guenter Roeck Reviewed-by: Adam Thomson Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: imx_sc_wdt: Fix reboot on crash

2020-06-17T14:40:27+00:00

commit e56d48e92b1017b6a8dbe64923a889283733fd96 upstream. Currently when running the samples/watchdog/watchdog-simple.c application and forcing a kernel crash by doing: # ./watchdog-simple & # echo c > /proc/sysrq-trigger The system does not reboot as expected. Fix it by calling imx_sc_wdt_set_timeout() to configure the i.MX8QXP watchdog with a proper timeout. Cc: Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support") Reported-by: Breno Lima Signed-off-by: Fabio Estevam Reviewed-by: Guenter Roeck Tested-by: Breno Lima Link: https://lore.kernel.org/r/20200412230122.5601-1-festevam@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman

watchdog: reset last_hw_keepalive time at start

2020-04-29T14:32:57+00:00

[ Upstream commit 982bb70517aef2225bad1d802887b733db492cc0 ] Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by: Tero Kristo Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: sp805: fix restart handler

2020-04-23T08:36:15+00:00

commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler") Signed-off-by: Michael Walle Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman

watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional

2020-04-08T07:08:46+00:00

commit e42b0c24389d5a1602e77db4f6def0d5a19e3e43 upstream. The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version (or higher), and when legacy iTCO_vendorsupport is set. Modify the driver so that ICH_RES_IO_SMI is optional if the two conditions are not met. Signed-off-by: Mika Westerberg Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

watchdog: iTCO_wdt: Export vendorsupport

2020-04-08T07:08:46+00:00

commit 7ca6ee38909109751bfab79e9f6c570d2ed258c6 upstream. In preparation for making ->smi_res optional the iTCO_wdt driver needs to know whether vendorsupport is being set to non-zero. For this reason export the variable. Signed-off-by: Mika Westerberg Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

ACPI: watchdog: Set default timeout in probe

2020-03-21T07:11:48+00:00

[ Upstream commit cabe17d0173ab04bd3f87b8199ae75f43f1ea473 ] If the BIOS default timeout for the watchdog is too small userspace may not have enough time to configure new timeout after opening the device before the system is already reset. For this reason program default timeout of 30 seconds in the driver probe and allow userspace to change this from command line or through module parameter (wdat_wdt.timeout). Reported-by: Jean Delvare Signed-off-by: Mika Westerberg Reviewed-by: Jean Delvare Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

watchdog: da9062: do not ping the hw during stop()

2020-03-12T12:00:13+00:00

[ Upstream commit e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ] The da9062 hw has a minimum ping cool down phase of at least 200ms. The driver takes that into account by setting the min_hw_heartbeat_ms to 300ms and the core guarantees that the hw limit is observed for the ping() calls. But the core can't guarantee the required minimum ping cool down phase if a stop() command is send immediately after the ping() command. So it is not allowed to ping the watchdog within the stop() command as the driver does. Remove the ping can be done without doubts because the watchdog gets disabled anyway and a (re)start resets the watchdog counter too. Signed-off-by: Marco Felsch Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de [groeck: Updated description] Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

ACPI: watchdog: Fix gas->access_width usage

2020-03-05T15:43:42+00:00

commit 2ba33a4e9e22ac4dda928d3e9b5978a3a2ded4e0 upstream. ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by: Jean Delvare Signed-off-by: Mika Westerberg Reviewed-by: Jean Delvare Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe

2020-02-14T21:34:18+00:00

commit 85fdc63fe256b595f923a69848cd99972ff446d8 upstream. If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should start/reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set), until the userspace watchdog daemon takes over control Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver") Signed-off-by: Christophe Roullier Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman