kernel/linux.git/drivers/watchdog, branch linux-5.3.y

watchdog: aspeed: Fix clock behaviour for ast2600

2019-12-13T07:49:49+00:00

[ Upstream commit c04571251b3d842096f1597f5d4badb508be016d ] The ast2600 no longer uses bit 4 in the control register to indicate a 1MHz clock (It now controls whether this watchdog is reset by a SOC reset). This means we do not want to set it. It also does not need to be set for the ast2500, as it is read-only on that SoC. The comment next to the clock rate selection wandered away from where it was set, so put it back next to the register setting it's describing. Fixes: b3528b487448 ("watchdog: aspeed: Add support for AST2600") Signed-off-by: Joel Stanley Reviewed-by: Cédric Le Goater Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20191108032905.22463-1-joel@jms.id.au Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading

2019-12-04T21:33:46+00:00

[ Upstream commit 81363f248aecd2b5f10547af268a4dfaf8963489 ] The bd70528 watchdog driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for watchdog is added. Fixes: bbc88a0ec9f37 ("watchdog: bd70528: Initial support for ROHM BD70528 watchdog block") Signed-off-by: Matti Vaittinen Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format

2019-12-04T21:33:44+00:00

[ Upstream commit 2c50a6b825b3463a7600d6e6acadba73211c3d2c ] SCU firmware calculates pretimeout based on current time stamp instead of watchdog timeout stamp, need to convert the pretimeout to SCU firmware's timeout value. Fixes: 15f7d7fc5542 ("watchdog: imx_sc: Add pretimeout support") Signed-off-by: Anson Huang Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: meson: Fix the wrong value of left time

2019-12-04T21:33:44+00:00

[ Upstream commit 2c77734642d52448aca673e889b39f981110828b ] The left time value is wrong when we get it by sysfs. The left time value should be equal to preset timeout value minus elapsed time value. According to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved to BIT[16-31] of the WATCHDOG_TCNT. [0]: http://linux-meson.com Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver") Signed-off-by: Xingyu Chen Acked-by: Neil Armstrong Reviewed-by: Kevin Hilman Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: pm8916_wdt: fix pretimeout registration flow

2019-12-04T21:33:43+00:00

[ Upstream commit 1993f1d7ca3f315e0459c58c8e7038039a96dd85 ] When an IRQ is present in the dts, the probe function shall fail if the interrupt can not be registered. The probe function shall also be retried if getting the irq is being deferred. Signed-off-by: Jorge Ramirez-Ortiz Reviewed-by: Loic Poulain Reviewed-by: Guenter Roeck Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: aspeed: Add support for AST2600

2019-10-11T16:36:34+00:00

[ Upstream commit b3528b4874480818e38e4da019d655413c233e6a ] The ast2600 can be supported by the same code as the ast2500. Signed-off-by: Ryan Chen Signed-off-by: Joel Stanley Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin

watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout

2019-10-11T16:36:11+00:00

commit 144783a80cd2cbc45c6ce17db649140b65f203dd upstream. Converting from ms to s requires dividing by 1000, not multiplying. So this is currently taking the smaller of new_timeout and 1.28e8, i.e. effectively new_timeout. The driver knows what it set max_hw_heartbeat_ms to, so use that value instead of doing a division at run-time. FWIW, this can easily be tested by booting into a busybox shell and doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the watchdog fires after 130&127 == 2 seconds. Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values" Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to Signed-off-by: Rasmus Villemoes Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Greg Kroah-Hartman

Merge tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

2019-08-22T18:26:10+00:00

Pull more fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arm and mips for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: video: fbdev: acornfb: Mark expected switch fall-through scsi: libsas: sas_discover: Mark expected switch fall-through MIPS: Octeon: Mark expected switch fall-through power: supply: ab8500_charger: Mark expected switch fall-through watchdog: wdt285: Mark expected switch fall-through mtd: sa1100: Mark expected switch fall-through drm/sun4i: tcon: Mark expected switch fall-through drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through ARM: riscpc: Mark expected switch fall-through dmaengine: fsldma: Mark expected switch fall-through

watchdog: wdt285: Mark expected switch fall-through

2019-08-21T00:43:23+00:00

Mark switch cases where we are expecting to fall through. Fix the following warning (Building: footbridge_defconfig arm): drivers/watchdog/wdt285.c: In function ‘watchdog_ioctl’: drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] watchdog_ping(); ^~~~~~~~~~~~~~~ drivers/watchdog/wdt285.c:172:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Signed-off-by: Gustavo A. R. Silva

watchdog: riowd: Mark expected switch fall-through

2019-08-10T00:51:01+00:00

Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook Reviewed-by: Guenter Roeck Signed-off-by: Gustavo A. R. Silva