kernel/linux.git/drivers/watchdog/Makefile, branch v6.18.21

watchdog: Add Nuvoton NCT6694 WDT support

2025-09-16T13:41:57+00:00

This driver supports Watchdog timer functionality for NCT6694 MFD device based on USB interface. Acked-by: Guenter Roeck Signed-off-by: Ming Yu Link: https://lore.kernel.org/r/20250912091952.1169369-6-a0282524688@gmail.com Signed-off-by: Lee Jones

watchdog: Add driver for Intel OC WDT

2025-06-01T11:16:33+00:00

Add a driver for the Intel Over-Clocking Watchdog found in Intel Platform Controller (PCH) chipsets. This watchdog is controlled via a simple single-register interface and would otherwise be standard except for the presence of a LOCK bit that can only be set once per power cycle, needing extra handling around it. Signed-off-by: Diogo Ivo Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250317-ivo-intel_oc_wdt-v3-1-32c396f4eefd@siemens.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Add the Watchdog Timer for the NXP S32 platform

2025-05-24T14:57:54+00:00

The S32 platform has several Watchdog Timer available and tied with a CPU. The SWT0 is the only one which directly asserts the reset line, other SWT require an external setup to configure the reset behavior which is not part of this change. As a side note, in the NXP documentation, the s32g2 and s32g3 reference manuals refer the watchdog as the 'Software Timer Watchdog' where the name can be misleading as it is actually a hardware watchdog. The maximum watchdog timeout value depends on the clock feeding the SWT counter which is 32bits wide. On the s32g274-rb2, the clock has a rate of 51MHz which result on 83 seconds maximum timeout. The timeout can be specified via the device tree with the usual existing bindings 'timeout-sec' or via the module param timeout. The watchdog can be loaded with the 'nowayout' option, preventing the watchdog to be stopped. The watchdog can be started at boot time with the 'early-enable' option, thus letting the watchdog framework to service the watchdog counter. The watchdog support the magic character to stop when the userspace releases the device. Cc: Ghennadi Procopciuc Cc: Thomas Fossati Signed-off-by: Daniel Lezcano Tested-by: Alexandru-Catalin Ionita Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250410082616.1855860-3-daniel.lezcano@linaro.org Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

2025-03-09T14:19:43+00:00

Watchdog driver implementation for Lenovo SE30 platform. Signed-off-by: Mark Pearson Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250131204855.1827-1-mpearson-lenovo@squebb.ca Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog

2024-12-05T18:03:43+00:00

Pull watchdog updates from Wim Van Sebroeck: - Add support for exynosautov920 SoC - Add support for Airoha EN7851 watchdog - Add support for MT6735 TOPRGU/WDT - Delete the cpu5wdt driver - Always print when registering watchdog fails - Several other small fixes and improvements * tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: rti: of: honor timeout-sec property watchdog: s3c2410_wdt: add support for exynosautov920 SoC dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings watchdog: mediatek: Add support for MT6735 TOPRGU/WDT watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property dt-bindings: watchdog: Document Qualcomm QCS8300 docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs" watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler watchdog: Switch back to struct platform_driver::remove() watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04 watchdog: da9063: Remove __maybe_unused notations watchdog: da9063: Do not use a global variable watchdog: Delete the cpu5wdt driver watchdog: Add support for Airoha EN7851 watchdog dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581 watchdog: sl28cpld_wdt: don't print out if registering watchdog fails watchdog: rza_wdt: don't print out if registering watchdog fails watchdog: rti_wdt: don't print out if registering watchdog fails ...

watchdog: Delete the cpu5wdt driver

2024-11-05T09:04:39+00:00

This driver has a number of issues (accesses arbitrary I/O ports without identifying the hardware, doesn't document what hardware it supports, suspiciously inconsistent locking model, doesn't implement WDIOC_SETTIMEOUT, potential integer overflow...) The driver was added in 2003 and there's no evidence that it has any recent user, all changes seem to be tree-wide, subsystem-wide, or the result of static code analysis. So I believe we should simply drop this legacy piece of code. Signed-off-by: Jean Delvare Message-ID: <20241011170710.484a257a@endymion.delvare> Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20241022114731.31f69c94@endymion.delvare Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Add support for Airoha EN7851 watchdog

2024-11-05T09:04:39+00:00

Add support for Airoha EN7851 watchdog. This is a very basic watchdog with no pretimeout support, max timeout is 28 seconds and it ticks based on half the SoC BUS clock. Signed-off-by: Christian Marangi Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20241011104411.28659-2-ansuelsmth@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Congatec Board Controller watchdog timer driver

2024-10-09T15:32:11+00:00

Add watchdog timer support for the Congatec Board Controller. Acked-by: Guenter Roeck Signed-off-by: Thomas Richard Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-4-39ceceed5c47@bootlin.com Signed-off-by: Lee Jones

watchdog: Add Watchdog Timer driver for RZ/V2H(P)

2024-09-10T09:08:48+00:00

Add Watchdog Timer driver for RZ/V2H(P) SoC. Signed-off-by: Lad Prabhakar Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20240829193831.80768-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: ROHM BD96801 PMIC WDG driver

2024-06-27T08:24:45+00:00

Introduce driver for WDG block on ROHM BD96801 scalable PMIC. This driver only supports watchdog with I2C feeding and delayed response detection. Whether the watchdog toggles PRSTB pin or just causes an interrupt can be configured via device-tree. The BD96801 PMIC HW supports also window watchdog (too early feeding detection) and Q&A mode. These are not supported by this driver. Signed-off-by: Matti Vaittinen Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/bb3a49d606e793a61b0c033170ff2a9f30f3c2a5.1719473802.git.mazziesaccount@gmail.com Signed-off-by: Lee Jones