Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v5.16 2021-11-01T19:18:08+00:00 2021-11-01T19:18:08+00:00 Linus Walleij linus.walleij@linaro.org 2021-09-22T23:09:46+00:00 urn:sha1:d0305aac8e83caf24aaf44f1134335b405bbb075 This driver is named after the ambition to support more SoCs than the DB8500. Those were never produced, so cut down the scope and rename the driver accordingly. Since the Kconfig for the watchdog defaults to y this will still be built by default. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210922230947.1864357-2-linus.walleij@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 2021-10-26T19:31:02+00:00 Lukas Bulwahn lukas.bulwahn@gmail.com 2021-08-17T10:08:45+00:00 urn:sha1:14b2d18e81f266bfa7657746507b71c6641ba4f1 Commit 59d3ae9a5bf6 ("ARM: remove Intel iop33x and iop13xx support") removes the config ARCH_IOP13XX in ./arch/arm/Kconfig. Hence, since then, the corresponding iop watchdog timer driver is dead code. Remove this dead driver. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 2021-08-22T08:28:06+00:00 Matti Vaittinen matti.vaittinen@fi.rohmeurope.com 2021-05-25T10:14:31+00:00 urn:sha1:52a5502507bca19644c4d23112130eea361e79f1 The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/994d2e374262c3f59f4465c03ef23d3116120778.1621937490.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 2021-06-21T06:49:19+00:00 Daniel Palmer daniel@0x0f.com 2021-06-05T17:04:40+00:00 urn:sha1:e9800b7994642a794afd4894f072541c14277ce8 It adds a driver for the IP block handling the watchdog timer found for Mstar MSC313e SoCs and newer. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Co-developed-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Romain Perier <romain.perier@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210611200801.52139-3-romain.perier@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 2021-06-21T06:49:13+00:00 Curtis Klein curtis.klein@hpe.com 2021-02-03T20:11:30+00:00 urn:sha1:7b7d2fdc8c3e3f9fdb3558d674e1eeddc16c7d9e This adds the option to use a hrtimer to generate a watchdog pretimeout event for hardware watchdogs that do not natively support watchdog pretimeouts. With this enabled, all watchdogs will appear to have pretimeout support in userspace. If no pretimeout value is set, there will be no change in the watchdog's behavior. If a pretimeout value is set for a specific watchdog that does not have built-in pretimeout support, a timer will be started that should fire at the specified time before the watchdog timeout would occur. When the watchdog is successfully pinged, the timer will be restarted. If the timer is allowed to fire it will generate a pretimeout event. However because a software timer is used, it may not be able to fire in every circumstance. If the watchdog does support a pretimeout natively, that functionality will be used instead of the hrtimer. The general design of this feaure was inspired by the software watchdog, specifically its own pretimeout implementation. However the software watchdog and this feature are completely independent. They can be used together; with or without CONFIG_SOFT_WATCHDOG_PRETIMEOUT enabled. The main advantage of using the hrtimer pretimeout with a hardware watchdog, compared to running the software watchdog with a hardware watchdog, is that if the hardware watchdog driver is unable to ping the watchdog (e.g. due to a bus or communication error), then the hrtimer pretimeout would still fire whereas the software watchdog would not. Signed-off-by: Curtis Klein <curtis.klein@hpe.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1612383090-27110-1-git-send-email-curtis.klein@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 2021-06-21T06:49:11+00:00 Christophe Leroy christophe.leroy@csgroup.eu 2021-03-18T17:25:06+00:00 urn:sha1:bc65baf73b68448e79e8ff797522d1976788deb1 Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") removed the last selector of CONFIG_MV64X60. Therefore CONFIG_MV64X60_WDT cannot be selected anymore and can be removed. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/9c2952bcfaec3b1789909eaa36bbce2afbfab7ab.1616085654.git.christophe.leroy@csgroup.eu Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 2021-03-10T10:58:44+00:00 Matti Vaittinen matti.vaittinen@fi.rohmeurope.com 2021-03-10T08:08:36+00:00 urn:sha1:b237bcac557ac30a4064863f582e06073248392a Add Watchdog support for ROHM BD9576MUF and BD9573MUF PMICs which are mainly used to power the R-Car series processors. The watchdog is pinged using a GPIO and enabled using another GPIO. Additionally watchdog time-out can be configured to HW prior starting the watchdog. Watchdog timeout can be configured to detect only delayed ping or in a window mode where also too fast pings are detected. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> 2021-02-22T17:07:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-02-22T17:07:51+00:00 urn:sha1:deb8d159a0a69bd19a328c700bb42b802cbcf7b5 Pull watchdog updates from Wim Van Sebroeck: "New drivers: - Intel Keembay Soc New chip versions: - sun4i: Add H616 compatible string - mt8192 wdt support - more Rockchip compatibles to snps,dw-wdt.yaml - binding for Qcom SDX55 - r8a779a0 (V3U) support Removed drivers: - sirf prima watchdog driver - sirf atlas watchdog driver - zte zx watchdog driver - tango watchdog driver - coh901 watchdog driver And several fixes and clean-ups" * tag 'linux-watchdog-5.12-rc1' of git://www.linux-watchdog.org/linux-watchdog: (24 commits) watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQ watchdog: mei_wdt: request stop on unregister dt-bindings: watchdog: Add binding for Qcom SDX55 watchdog: remove coh901 driver watchdog: remove tango driver watchdog: remove zte zx driver watchdog: remove sirf atlas driver watchdog: remove sirf prima driver watchdog: mt8192: add wdt support dt-binding: mt8192: add toprgu reset-controller head file dt-binding: mediatek: mt8192: update mtk-wdt document dt-binding: mediatek: watchdog: fix the description of compatible dt-binding: watchdog: add more Rockchip compatibles to snps,dw-wdt.yaml dt-bindings: watchdog: sun4i: Add H616 compatible string watchdog: mtk_wdt: Remove mtk_wdt_stop() in probe() to prevent the system freeze and it doesn't reboot by watchdog problem watchdog: renesas_wdt: add grace period before rebooting watchdog: stop wdd when watchdog hw running in reboot_notifier watchdog: ziirave_wdt: remove unused including <linux/version.h> dt-bindings: watchdog: renesas,wdt: add r8a779a0 (V3U) support watchdog: renesas_wdt: don't sleep in atomic context ... 2021-02-07T13:41:27+00:00 Arnd Bergmann arnd@arndb.de 2021-01-20T16:27:45+00:00 urn:sha1:5ecd125b4b2a55a394a459df331a0b6380c773fa The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210120162745.61268-6-arnd@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 2021-02-07T13:41:26+00:00 Arnd Bergmann arnd@arndb.de 2021-01-20T16:27:44+00:00 urn:sha1:c1b50b55b00daa373379bb1062afab5ce279cad1 The tango platform is getting removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mans Rullgard <mans@mansr.com> Link: https://lore.kernel.org/r/20210120162745.61268-5-arnd@kernel.org [groeck: Removed devicetree bindings] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>