kernel/linux.git/drivers/video/fbdev, branch v5.10.258

fbdev: offb: fix PCI device reference leak on probe failure

2026-06-01T15:29:41+00:00

[ Upstream commit 869b93ba04088713596e68453c1146f52f713290 ] offb_init_nodriver() gets a referenced PCI device with pci_get_device(). If pci_enable_device() fails, the function returns without dropping that reference. Release the PCI device reference before returning from the pci_enable_device() failure path. Fixes: 5bda8f7b5468 ("video: fbdev: offb: Call pci_enable_device() before using the PCI VGA device") Co-developed-by: Myeonghun Pak Signed-off-by: Myeonghun Pak Co-developed-by: Ijae Kim Signed-off-by: Ijae Kim Co-developed-by: Taegyu Kim Signed-off-by: Taegyu Kim Signed-off-by: Yuho Choi Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: matroxfb: Mark variable with __maybe_unused to avoid W=1 build break

2026-06-01T15:29:32+00:00

[ Upstream commit caf6144053b4e1c815aa56afb54745a176f999df ] Clang is not happy about set but unused variable: drivers/video/fbdev/matrox/g450_pll.c:412:18: error: variable 'mnp' set but not used 412 | unsigned int mnp; | ^ 1 error generated. Since the commit 7b987887f97b ("video: fbdev: matroxfb: remove dead code and set but not used variable") the 'mnp' became unused, but eliminating that code might have side-effects. The question here is what should we do with 'mnp'? The easiest way out is just mark it with __maybe_unused which will shut the compiler up and won't change any possible IO flow. So does this change. A dive into the history of the driver: The problem was revealed when the #if 0 guarded code along with unused pixel_vco variable was removed. That code was introduced in the original commit 213d22146d1f ("[PATCH] (1/3) matroxfb for 2.5.3"). And then guarded in the commit 705e41f82988 ("matroxfb DVI updates: Handle DVI output on G450/G550. Powerdown unused portions of G450/G550 DAC. Split G450/G550 DAC from older DAC1064 handling. Modify PLL setting when both CRTCs use same pixel clocks."). NOTE: The two commits mentioned above pre-date Git era and available in history.git repository for archaeological purposes. Even without that guard the modern compilers may see that the pixel_vco wasn't ever used and seems a leftover after some debug or review made 25 years ago. The g450_mnp2vco() doesn't have any IO and as Jason said doesn't seem to have any side effects either than some unneeded CPU processing during runtime. I agree that's unlikely that timeout (or heating up the CPU) has any effect on the HW (GPU/display) functionality. Fixes: 7b987887f97b ("video: fbdev: matroxfb: remove dead code and set but not used variable") Signed-off-by: Andy Shevchenko Reviewed-by: Jason Yan Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free

2026-06-01T15:29:22+00:00

commit 8de779dc40d35d39fa07387b6f921eb11df0f511 upstream. dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages to userspace but sets no vm_ops on the VMA. This means the kernel cannot track active mmaps. When dlfb_realloc_framebuffer() replaces the backing buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated. On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages while userspace PTEs still reference them, resulting in a use-after-free: the process retains read/write access to freed kernel pages. Add vm_operations_struct with open/close callbacks that maintain an atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(), check mmap_count and return -EBUSY if the buffer is currently mapped, preventing buffer replacement while userspace holds stale PTEs. Tested with PoC using dummy_hcd + raw_gadget USB device emulation. Signed-off-by: Rajat Gupta Acked-by: Greg Kroah-Hartman Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO

2026-06-01T15:29:11+00:00

commit a31e4518bec70333a0a98f2946a12b53b45fe5b9 upstream. Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide by zero error"), we also need to prevent that same crash from happening in the udlfb driver as it uses pixclock directly when dividing, which will crash. Cc: Bernie Thompson Cc: Helge Deller Fixes: 59277b679f8b ("Staging: udlfb: add dynamic modeset support") Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

fbdev: tdfxfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO

2026-06-01T15:29:11+00:00

commit 8f98b81fe011e1879e6a7b1247e69e06a5e17af2 upstream. Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide by zero error"), we also need to prevent that same crash from happening in the udlfb driver as it uses pixclock directly when dividing, which will crash. Cc: Helge Deller Assisted-by: gregkh_clanker_t1000 Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

fbdev: ffb: fix corrupted video output on Sun FFB1

2026-03-04T12:20:24+00:00

[ Upstream commit b28da0d092461ac239ff034a8ac3129320177ba3 ] Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and initializing window mode to a known state. The issue never appeared on my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM version. /SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4] X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered. X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control) X (II) /dev/fb0: Detected Creator/Creator3D [1] https://www.instagram.com/p/DUTcSmSjSem/ [2] https://chaos.social/@ReneRebe/116023241660154102 Signed-off-by: René Rebe Cc: stable@kernel.org Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: vt8500lcdfb: fix missing dma_free_coherent()

2026-03-04T12:20:24+00:00

[ Upstream commit 88b3b9924337336a31cefbe99a22ed09401be74a ] fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached. Fixes: e7b995371fe1 ("video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb") Cc: Signed-off-by: Thomas Fourier Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()

2026-03-04T12:19:41+00:00

[ Upstream commit ce4e25198a6aaaaf36248edf8daf3d744ec8e309 ] In au1200fb_drv_probe(), when platform_get_irq fails(), it directly returns from the function with an error code, which causes a memory leak. Replace it with a goto label to ensure proper cleanup. Fixes: 4e88761f5f8c ("fbdev: au1200fb: Fix missing IRQ check in au1200fb_drv_probe") Signed-off-by: Felix Gu Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: smscufx: properly copy ioctl memory to kernelspace

2026-02-19T15:20:27+00:00

commit 120adae7b42faa641179270c067864544a50ab69 upstream. The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel. Reported-by: Tianchu Chen Cc: stable Cc: Steve Glendinning Cc: Helge Deller Signed-off-by: Greg Kroah-Hartman Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

fbdev: rivafb: fix divide error in nv3_arb()

2026-02-19T15:20:27+00:00

commit 0209e21e3c372fa2da04c39214bec0b64e4eb5f4 upstream. A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman