kernel/linux.git/drivers/video/fbdev/via, branch v6.6.132

fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2

2024-04-13T11:07:39+00:00

[ Upstream commit bc87bb342f106a0402186bcb588fcbe945dced4b ] There are some actions with value 'tmp' but 'dst_addr' is checked instead. It is obvious that a copy-paste error was made here and the value of variable 'tmp' should be checked here. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Aleksandr Burakov Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: Remove FBINFO_DEFAULT from framebuffer_alloc()'ed structs

2023-07-24T14:50:38+00:00

The flag FBINFO_DEFAULT is 0 and has no effect, as struct fbinfo.flags has been allocated to zero by framebuffer_alloc(). So do not set it. Flags should signal differences from the default values. After cleaning up all occurrences of FBINFO_DEFAULT, the token will be removed. v4: * clarify commit message (Geert, Dan) v2: * fix commit message (Miguel) Signed-off-by: Thomas Zimmermann Acked-by: Sam Ravnborg Cc: Helge Deller Cc: Nicolas Ferre Cc: Benjamin Herrenschmidt Cc: Ferenc Bakonyi Cc: "K. Y. Srinivasan" Cc: Haiyang Zhang Cc: Wei Liu Cc: Dexuan Cui Cc: Antonino Daplas Cc: Maik Broemme Cc: Michael Ellerman Cc: Nicholas Piggin Cc: Christophe Leroy Cc: Kristoffer Ericson Cc: Hans de Goede Cc: Steve Glendinning Cc: Bernie Thompson Cc: Florian Tobias Schandinat Link: https://patchwork.freedesktop.org/patch/msgid/20230715185343.7193-6-tzimmermann@suse.de

fbdev/media: Use GPIO descriptors for VIA GPIO

2023-06-19T07:02:51+00:00

The VIA fbdev exposes a custom GPIO chip for its GPIOs, these are in turn looked up the camera driver using a custom API. Drop the custom API, provide a look-up table and convert to GPIO descriptors. Note proper polarity on the RESET line. Cc: Jonathan Corbet Signed-off-by: Linus Walleij Signed-off-by: Helge Deller

fbdev: via: Convert to platform remove callback returning void

2023-04-24T09:48:33+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Helge Deller

fbdev: via: Fix error in via_core_init()

2022-12-14T19:01:50+00:00

via_core_init() won't exit the driver when pci_register_driver() failed. Exit the viafb-i2c and the viafb-gpio in failed path to prevent error. VIA Graphics Integration Chipset framebuffer 2.4 initializing Error: Driver 'viafb-i2c' is already registered, aborting... Error: Driver 'viafb-gpio' is already registered, aborting... Fixes: 7582eb9be85f ("viafb: Turn GPIO and i2c into proper platform devices") Signed-off-by: Shang XiaoJing Signed-off-by: Helge Deller

fbdev: Add support for the nomodeset kernel parameter

2022-11-16T12:26:25+00:00

Support the kernel's nomodeset parameter for all PCI-based fbdev drivers that use aperture helpers to remove other, hardware-agnostic graphics drivers. The parameter is a simple way of using the firmware-provided scanout buffer if the hardware's native driver is broken. The same effect could be achieved with per-driver options, but the importance of the graphics output for many users makes a single, unified approach worthwhile. With nomodeset specified, the fbdev driver module will not load. This unifies behavior with similar DRM drivers. In DRM helpers, modules first check the nomodeset parameter before registering the PCI driver. As fbdev has no such module helpers, we have to modify each driver individually. The name 'nomodeset' is slightly misleading, but has been chosen for historical reasons. Several drivers implemented it before it became a general option for DRM. So keeping the existing name was preferred over introducing a new one. v2: * print a warning if a driver does not init (Helge) * wrap video_firmware_drivers_only() in helper Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-3-tzimmermann@suse.de

fbdev: Remove conflicting devices on PCI bus

2022-07-19T11:19:11+00:00

Remove firmware devices on the PCI bus, by calling aperture_remove_conflicting_pci_devices() in the probe function of each related fbdev driver. iSo far, most of these drivers did not remove conflicting VESA or EFI devices, or outride failed for resource conflicts (i.e., matroxfb.) This must have been broken for quite some time. Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220718072322.8927-7-tzimmermann@suse.de

video: fbdev: via: check the return value of kstrdup()

2022-02-22T08:00:09+00:00

kstrdup() is a memory allocation function which can return NULL when some internal memory errors happen. It is better to check the return value of it to catch the error in time during the setup of viafb. Signed-off-by: Xiaoke Wang Signed-off-by: Helge Deller

video: fbdev: via: Fix spelling mistake "bellow" -> "below"

2022-01-29T21:24:25+00:00

There is a spelling mistake in a debug message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: Helge Deller

video: fbdev: via: Fix set but not used warning for mode_crt_table

2020-11-30T19:04:24+00:00

Fix warning by deleting the variable. The function call viafb_get_best_mode() was verified to have no side-effects, and thus could be dropped too. v2: - Update subject (Lee) Signed-off-by: Sam Ravnborg Acked-by: Thomas Zimmermann Cc: Florian Tobias Schandinat Cc: linux-fbdev@vger.kernel.org Cc: Lee Jones Link: https://patchwork.freedesktop.org/patch/msgid/20201128224114.1033617-12-sam@ravnborg.org