kernel/linux.git/drivers/video/fbdev/savage, branch v6.1.168

fbdev: savage: Handle err return when savagefb_check_var failed

2024-06-16T11:41:36+00:00

commit 6ad959b6703e2c4c5d7af03b4cfd5ff608036339 upstream. The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero") checks the value of pixclock to avoid divide-by-zero error. However the function savagefb_probe doesn't handle the error return of savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error. Fixes: 04e5eac8f3ab ("fbdev: savage: Error out if pixclock equals zero") Signed-off-by: Cai Xinchen Cc: stable@vger.kernel.org Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman

fbdev: savage: Error out if pixclock equals zero

2024-03-01T12:26:25+00:00

[ Upstream commit 04e5eac8f3ab2ff52fa191c187a46d4fdbc1e288 ] The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. Signed-off-by: Fullway Wang Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: Remove conflicting devices on PCI bus

2022-07-19T11:19:11+00:00

Remove firmware devices on the PCI bus, by calling aperture_remove_conflicting_pci_devices() in the probe function of each related fbdev driver. iSo far, most of these drivers did not remove conflicting VESA or EFI devices, or outride failed for resource conflicts (i.e., matroxfb.) This must have been broken for quite some time. Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20220718072322.8927-7-tzimmermann@suse.de

video: fbdev: savagefb: make a variable local

2022-01-30T18:37:03+00:00

The "edid" struct member is only used during probe() and it's freed right away. There is no point in storing a freed pointer for the whole life of the driver. Signed-off-by: Dan Carpenter Signed-off-by: Helge Deller

fbdev: savagefb: use generic power management

2020-09-08T11:33:15+00:00

Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Now, - savagefb_suspend() had a "pm_message_t" type parameter as per legacy PCI PM framework that got deprecated in generic. - Rename the callback as savagefb_suspend_late() and preserve the parameter. - Define 3 new callbacks as: * savagefb_suspend() * savagefb_freeze() * savagefb_hibernate() which in turn call savagefb_suspend_late() by passing appropriate value for "pm_message_t" type parameter. - Bind the callbacks in "struct dev_pm_ops" type variable "savagefb_pm_ops". Signed-off-by: Vaibhav Gupta Cc: Bjorn Helgaas Cc: Bjorn Helgaas Cc: Bjorn Helgaas Cc: Vaibhav Gupta Cc: Sam Ravnborg Cc: Paul Mackerras Cc: Russell King Cc: Andres Salomon CC: Antonino Daplas Cc: Shuah Khan Signed-off-by: Bartlomiej Zolnierkiewicz Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-8-vaibhavgupta40@gmail.com

fbdev: Use fallthrough pseudo-keyword

2020-08-03T19:38:37+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200707210539.GA12530@embeddedor

video: fbdev: savage: fix memory leak on error handling path in probe

2020-07-10T14:17:23+00:00

savagefb_probe() calls savage_init_fb_info() that can successfully allocate memory for info->pixmap.addr but then fail when fb_alloc_cmap() fails. savagefb_probe() goes to label failed_init and does not free allocated memory. It is not valid to go to label failed_mmio since savage_init_fb_info() can fail during memory allocation as well. So, the patch free allocated memory on the error handling path in savage_init_fb_info() itself. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov Cc: Antonino Daplas Signed-off-by: Bartlomiej Zolnierkiewicz Link: https://patchwork.freedesktop.org/patch/msgid/20200619162136.9010-1-novikov@ispras.ru

mm: don't include asm/pgtable.h if linux/mm.h is already included

2020-06-09T16:39:13+00:00

Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include in the files that include . The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include ") ; do sed -i -e '/include / d' $f done Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Mike Rapoport Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds

fbdev: savage: fix -Wextra build warning

2020-03-20T13:29:10+00:00

When 'SAVAGEFB_DEBUG' is not defined, modify the DBG() macro to use the no_printk() macro instead of using . This fixes a build warning when -Wextra is used and provides printk format checking: ../drivers/video/fbdev/savage/savagefb_driver.c:2411:13: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Signed-off-by: Randy Dunlap Cc: Antonino Daplas Cc: Florian Tobias Schandinat Signed-off-by: Bartlomiej Zolnierkiewicz Link: https://patchwork.freedesktop.org/patch/msgid/20200315041002.24473-5-rdunlap@infradead.org

video: constify fb ops across all drivers

2019-12-05T08:57:53+00:00

Now that the fbops member of struct fb_info is const, we can start making the ops const as well. This does not cover all drivers; some actually modify the fbops struct, for example to adjust for different configurations, and others do more involved things that I'd rather not touch in practically obsolete drivers. Mostly this is the low hanging fruit where we can add "const" and be done with it. v3: - un-constify atyfb, mb862xx, nvidia and uvesabf (0day) v2: - fix typo (Christophe de Dinechin) - use "static const" instead of "const static" in mx3fb.c - also constify smscufx.c Cc: linux-fbdev@vger.kernel.org Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/ce67f14435f3af498f2e8bf35ce4be11f7504132.1575390740.git.jani.nikula@intel.com