kernel/linux.git/drivers/video/Makefile, branch v6.6.132

video: Provide screen_info_get_pci_dev() to find screen_info's PCI device

2024-08-11T10:47:15+00:00

[ Upstream commit 036105e3a776b6fc2fe0d262896a23ff2cc2e6b1 ] Add screen_info_get_pci_dev() to find the PCI device of an instance of screen_info. Does nothing on systems without PCI bus. v3: * search PCI device with pci_get_base_class() (Sui) v2: * remove ret from screen_info_pci_dev() (Javier) Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-3-tzimmermann@suse.de Stable-dep-of: c2bc958b2b03 ("fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes") Signed-off-by: Sasha Levin

video: Add helpers for decoding screen_info

2024-08-11T10:47:15+00:00

[ Upstream commit 75fa9b7e375e35739663cde0252d31e586c6314a ] The plain values as stored in struct screen_info need to be decoded before being used. Add helpers that decode the type of video output and the framebuffer I/O aperture. Old or non-x86 systems may not set the type of video directly, but only indicate the presence by storing 0x01 in orig_video_isVGA. The decoding logic in screen_info_video_type() takes this into account. It then follows similar code in vgacon's vgacon_startup() to detect the video type from the given values. A call to screen_info_resources() returns all known resources of the given screen_info. The resources' values have been taken from existing code in vgacon and vga16fb. These drivers can later be converted to use the new interfaces. v2: * return ssize_t from screen_info_resources() * don't call __screen_info_has_lfb() unnecessarily Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20240212090736.11464-2-tzimmermann@suse.de Stable-dep-of: c2bc958b2b03 ("fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes") Signed-off-by: Sasha Levin

video: Move HP PARISC STI core code to shared location

2023-04-20T08:04:51+00:00

STI core files have been located in console and fbdev code. Move the source code and header to the directories for video helpers. Also update the config and build rules such that the code depends on the config symbol CONFIG_STI_CORE, which STI console and STI framebuffer select automatically. Cleans up the console makefile and prepares PARISC to implement fb_is_primary_device() within the arch/ directory. No functional changes. Signed-off-by: Thomas Zimmermann Acked-by: Arnd Bergmann Acked-by: Helge Deller Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-12-tzimmermann@suse.de

fbdev: Handle video= parameter in video/cmdline.c

2023-02-20T13:56:48+00:00

Handle the command-line parameter video= in video/cmdline.c. Implement the fbdev helper fb_get_options() on top. Will allows to handle the kernel parameter in DRM without fbdev dependencies. Note that __video_get_options() has the meaning of its return value inverted compared to fb_get_options(). The new helper returns true if the adapter has been enabled, and false otherwise. There is the ofonly parameter, which disables output for non-OF-based framebuffers. It is only for offb and looks like a workaround. The actual purpose it not clear to me. Use 'video=off' or 'nomodeset' instead. Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-9-tzimmermann@suse.de

drm: Move nomodeset kernel parameter to drivers/video

2022-11-16T12:26:12+00:00

Move the nomodeset kernel parameter to drivers/video to make it available to non-DRM drivers. Adapt the interface, but keep the DRM interface drm_firmware_drivers_only() to avoid churn within DRM. The function should later be inlined into callers. The parameter disables any DRM graphics driver that would replace a driver for firmware-provided scanout buffers. It is an option to easily fallback to basic graphics output if the hardware's native driver is broken. Moving it to a more prominent location wil make it available to fbdev as well. v2: * clarify the meaning of the nomodeset parameter (Javier) Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de

drm: Implement DRM aperture helpers under video/

2022-06-27T09:07:55+00:00

Implement DRM's aperture helpers under video/ for sharing with other sub-systems. Remove DRM-isms from the interface. The helpers track the ownership of framebuffer apertures and provide hand-over from firmware, such as EFI and VESA, to native graphics drivers. Other subsystems, such as fbdev and vfio, also have to maintain ownership of framebuffer apertures. Moving DRM's aperture helpers to a more public location allows all subsystems to interact with each other and share a common implementation. The aperture helpers are selected by the various firmware drivers within DRM and fbdev, and the VGA text-console driver. The original DRM interface is kept in place for use by DRM drivers. v3: * prefix all interfaces with aperture_ (Javier) * rework and simplify documentation (Javier) * rename struct dev_aperture to struct aperture_range * rebase onto latest DRM * update MAINTAINERS entry Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Tested-by: Laszlo Ersek Link: https://patchwork.freedesktop.org/patch/msgid/20220622140134.12763-3-tzimmermann@suse.de

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

fbdev: sti: don't select CONFIG_VT

2017-05-05T15:25:12+00:00

While working on another build error, I ran into several variations of this dependency loop: subsection "Kconfig recursive dependency limitations" drivers/input/Kconfig:8: symbol INPUT is selected by VT For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/tty/Kconfig:12: symbol VT is selected by FB_STI For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/video/fbdev/Kconfig:677: symbol FB_STI depends on FB For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/video/fbdev/Kconfig:5: symbol FB is selected by DRM_KMS_FB_HELPER For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/Kconfig:72: symbol DRM_KMS_FB_HELPER is selected by DRM_KMS_CMA_HELPER For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/Kconfig:137: symbol DRM_KMS_CMA_HELPER is selected by DRM_HDLCD For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/arm/Kconfig:6: symbol DRM_HDLCD depends on OF For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/of/Kconfig:4: symbol OF is selected by X86_INTEL_CE For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:523: symbol X86_INTEL_CE depends on X86_IO_APIC For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:1011: symbol X86_IO_APIC depends on X86_LOCAL_APIC For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:1005: symbol X86_LOCAL_APIC depends on X86_UP_APIC For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" arch/x86/Kconfig:980: symbol X86_UP_APIC depends on PCI_MSI For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/pci/Kconfig:11: symbol PCI_MSI is selected by AMD_IOMMU For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/iommu/Kconfig:106: symbol AMD_IOMMU depends on IOMMU_SUPPORT For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/iommu/Kconfig:5: symbol IOMMU_SUPPORT is selected by DRM_ETNAVIV For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/gpu/drm/etnaviv/Kconfig:2: symbol DRM_ETNAVIV depends on THERMAL For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/thermal/Kconfig:5: symbol THERMAL is selected by ACPI_VIDEO For a resolution refer to Documentation/kbuild/kconfig-language.txt subsection "Kconfig recursive dependency limitations" drivers/acpi/Kconfig:183: symbol ACPI_VIDEO is selected by INPUT This doesn't currently show up as I fixed the 'THERMAL' part of it, but I noticed that the FB_STI dependency should not be there but was introduced by slightly incorrect bug-fix patch that tried to fix a link error. Instead of selecting 'VT' to make us enter the drivers/video/console directory at compile-time, it's sufficient to build the drivers/video/console/sticore.c file by adding its directory to when CONFIG_FB_STI is enabled. Alternatively, we could move the sticore code to another directory that is always built when we have at STI_CONSOLE or FB_STI enabled. Fixes: 17085a934592 ("parisc: stifb: should depend on STI_CONSOLE") Signed-off-by: Arnd Bergmann Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Alexander Beregalov Signed-off-by: Bartlomiej Zolnierkiewicz

video: move fbdev to drivers/video/fbdev

2014-04-17T05:10:19+00:00

The drivers/video directory is a mess. It contains generic video related files, directories for backlight, console, linux logo, lots of fbdev device drivers, fbdev framework files. Make some order into the chaos by creating drivers/video/fbdev directory, and move all fbdev related files there. No functionality is changed, although I guess it is possible that some subtle Makefile build order related issue could be created by this patch. Signed-off-by: Tomi Valkeinen Acked-by: Laurent Pinchart Acked-by: Geert Uytterhoeven Acked-by: Rob Clark Acked-by: Jingoo Han Acked-by: Daniel Vetter

Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-04-02T20:15:58+00:00

Pull x86 old platform removal from Peter Anvin: "This patchset removes support for several completely obsolete platforms, where the maintainers either have completely vanished or acked the removal. For some of them it is questionable if there even exists functional specimens of the hardware" Geert Uytterhoeven apparently thought this was a April Fool's pull request ;) * 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, platforms: Remove NUMAQ x86, platforms: Remove SGI Visual Workstation x86, apic: Remove support for IBM Summit/EXA chipset x86, apic: Remove support for ia32-based Unisys ES7000