kernel/linux.git/drivers/vfio/Kconfig, branch v6.6.131

vfio: Compile vfio_group infrastructure optionally

2023-07-25T16:20:50+00:00

vfio_group is not needed for vfio device cdev, so with vfio device cdev introduced, the vfio_group infrastructures can be compiled out if only cdev is needed. Reviewed-by: Jason Gunthorpe Tested-by: Nicolin Chen Tested-by: Matthew Rosato Tested-by: Yanting Jiang Tested-by: Shameer Kolothum Tested-by: Terrence Xu Tested-by: Zhenzhong Duan Signed-off-by: Yi Liu Link: https://lore.kernel.org/r/20230718135551.6592-26-yi.l.liu@intel.com Signed-off-by: Alex Williamson

vfio: Add cdev for vfio_device

2023-07-25T16:19:40+00:00

This adds cdev support for vfio_device. It allows the user to directly open a vfio device w/o using the legacy container/group interface, as a prerequisite for supporting new iommu features like nested translation and etc. The device fd opened in this manner doesn't have the capability to access the device as the fops open() doesn't open the device until the successful VFIO_DEVICE_BIND_IOMMUFD ioctl which will be added in a later patch. With this patch, devices registered to vfio core would have both the legacy group and the new device interfaces created. - group interface : /dev/vfio/$groupID - device interface: /dev/vfio/devices/vfioX - normal device ("X" is a unique number across vfio devices) For a given device, the user can identify the matching vfioX by searching the vfio-dev folder under the sysfs path of the device. Take PCI device (0000:6a:01.0) as an example, /sys/bus/pci/devices/0000\:6a\:01.0/vfio-dev/vfioX implies the matching vfioX under /dev/vfio/devices/, and vfio-dev/vfioX/dev contains the major:minor number of the matching /dev/vfio/devices/vfioX. The user can get device fd by opening the /dev/vfio/devices/vfioX. The vfio_device cdev logic in this patch: *) __vfio_register_dev() path ends up doing cdev_device_add() for each vfio_device if VFIO_DEVICE_CDEV configured. *) vfio_unregister_group_dev() path does cdev_device_del(); cdev interface does not support noiommu devices, so VFIO only creates the legacy group interface for the physical devices that do not have IOMMU. noiommu users should use the legacy group interface. Reviewed-by: Kevin Tian Reviewed-by: Jason Gunthorpe Tested-by: Terrence Xu Tested-by: Nicolin Chen Tested-by: Matthew Rosato Tested-by: Yanting Jiang Tested-by: Shameer Kolothum Tested-by: Zhenzhong Duan Signed-off-by: Yi Liu Link: https://lore.kernel.org/r/20230718135551.6592-19-yi.l.liu@intel.com Signed-off-by: Alex Williamson

vfio/cdx: add support for CDX bus

2023-06-16T18:27:04+00:00

vfio-cdx driver enables IOCTLs for user space to query MMIO regions for CDX devices and mmap them. This change also adds support for reset of CDX devices. With VFIO enabled on CDX devices, user-space applications can also exercise DMA securely via IOMMU on these devices. This change adds the VFIO CDX driver and enables the following ioctls for CDX devices: - VFIO_DEVICE_GET_INFO: - VFIO_DEVICE_GET_REGION_INFO - VFIO_DEVICE_RESET Signed-off-by: Nipun Gupta Reviewed-by: Pieter Jansen van Vuuren Tested-by: Nikhil Agarwal Link: https://lore.kernel.org/r/20230531124557.11009-1-nipun.gupta@amd.com Signed-off-by: Alex Williamson

vfio: Support VFIO_NOIOMMU with iommufd

2023-02-03T19:45:23+00:00

Add a small amount of emulation to vfio_compat to accept the SET_IOMMU to VFIO_NOIOMMU_IOMMU and have vfio just ignore iommufd if it is working on a no-iommu enabled device. Move the enable_unsafe_noiommu_mode module out of container.c into vfio_main.c so that it is always available even if VFIO_CONTAINER=n. This passes Alex's mini-test: https://github.com/awilliam/tests/blob/master/vfio-noiommu-pci-device-open.c Link: https://lore.kernel.org/r/0-v3-480cd64a16f7+1ad0-iommufd_noiommu_jgg@nvidia.com Reviewed-by: Kevin Tian Acked-by: Alex Williamson Signed-off-by: Jason Gunthorpe

Merge tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio

2022-12-15T21:12:15+00:00

Pull VFIO updates from Alex Williamson: - Replace deprecated git://github.com link in MAINTAINERS (Palmer Dabbelt) - Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing) - Drop unnecessary buffer from ACPI call (Rafael Mendonca) - Correct latent missing include issue in iova-bitmap and fix support for unaligned bitmaps. Follow-up with better fix through refactor (Joao Martins) - Rework ccw mdev driver to split private data from parent structure, better aligning with the mdev lifecycle and allowing us to remove a temporary workaround (Eric Farman) - Add an interface to get an estimated migration data size for a device, allowing userspace to make informed decisions, ex. more accurately predicting VM downtime (Yishai Hadas) - Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas) - Simplify module and Kconfig through consolidating SPAPR/EEH code and config options and folding virqfd module into main vfio module (Jason Gunthorpe) - Fix error path from device_register() across all vfio mdev and sample drivers (Alex Williamson) - Define migration pre-copy interface and implement for vfio/mlx5 devices, allowing portions of the device state to be saved while the device continues operation, towards reducing the stop-copy state size (Jason Gunthorpe, Yishai Hadas, Shay Drory) - Implement pre-copy for hisi_acc devices (Shameer Kolothum) - Fixes to mdpy mdev driver remove path and error path on probe (Shang XiaoJing) - vfio/mlx5 fixes for incorrect return after copy_to_user() fault and incorrect buffer freeing (Dan Carpenter) * tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits) vfio/mlx5: error pointer dereference in error handling vfio/mlx5: fix error code in mlx5vf_precopy_ioctl() samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe() hisi_acc_vfio_pci: Enable PRE_COPY flag hisi_acc_vfio_pci: Move the dev compatibility tests for early check hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions hisi_acc_vfio_pci: Add support for precopy IOCTL vfio/mlx5: Enable MIGRATION_PRE_COPY flag vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error vfio/mlx5: Introduce multiple loads vfio/mlx5: Consider temporary end of stream as part of PRE_COPY vfio/mlx5: Introduce vfio precopy ioctl implementation vfio/mlx5: Introduce SW headers for migration states vfio/mlx5: Introduce device transitions of PRE_COPY vfio/mlx5: Refactor to use queue based data chunks vfio/mlx5: Refactor migration file state vfio/mlx5: Refactor MKEY usage vfio/mlx5: Refactor PD usage vfio/mlx5: Enforce a single SAVE command at a time vfio: Extend the device migration protocol with PRE_COPY ...

vfio: Fold vfio_virqfd.ko into vfio.ko

2022-12-05T19:04:32+00:00

This is only 1.8k, putting it in its own module is not really necessary. The kconfig infrastructure is still there to completely remove it for systems that are trying for small footprint. Put it in the main vfio.ko module now that kbuild can support multiple .c files. Signed-off-by: Jason Gunthorpe Reviewed-by: Cornelia Huck Link: https://lore.kernel.org/r/5-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com Signed-off-by: Alex Williamson

vfio: Remove CONFIG_VFIO_SPAPR_EEH

2022-12-05T19:04:32+00:00

We don't need a kconfig symbol for this, just directly test CONFIG_EEH in the few places that need it. Reviewed-by: Christoph Hellwig Reviewed-by: Cornelia Huck Signed-off-by: Jason Gunthorpe Link: https://lore.kernel.org/r/4-v5-fc5346cacfd4+4c482-vfio_modules_jgg@nvidia.com Signed-off-by: Alex Williamson

vfio: Make vfio_container optionally compiled

2022-12-02T15:52:04+00:00

Add a kconfig CONFIG_VFIO_CONTAINER that controls compiling the container code. If 'n' then only iommufd will provide the container service. All the support for vfio iommu drivers, including type1, will not be built. This allows a compilation check that no inappropriate dependencies between the device/group and container have been created. Link: https://lore.kernel.org/r/9-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com Reviewed-by: Kevin Tian Reviewed-by: Alex Williamson Tested-by: Alex Williamson Tested-by: Nicolin Chen Tested-by: Yi Liu Tested-by: Lixiao Yang Tested-by: Matthew Rosato Tested-by: Yu He Signed-off-by: Jason Gunthorpe

vfio-iommufd: Allow iommufd to be used in place of a container fd

2022-12-02T15:52:03+00:00

This makes VFIO_GROUP_SET_CONTAINER accept both a vfio container FD and an iommufd. In iommufd mode an IOAS will exist after the SET_CONTAINER, but it will not be attached to any groups. For VFIO this means that the VFIO_GROUP_GET_STATUS and VFIO_GROUP_FLAGS_VIABLE works subtly differently. With the container FD the iommu_group_claim_dma_owner() is done during SET_CONTAINER but for IOMMUFD this is done during VFIO_GROUP_GET_DEVICE_FD. Meaning that VFIO_GROUP_FLAGS_VIABLE could be set but GET_DEVICE_FD will fail due to viability. As GET_DEVICE_FD can fail for many reasons already this is not expected to be a meaningful difference. Reorganize the tests for if the group has an assigned container or iommu into a vfio_group_has_iommu() function and consolidate all the duplicated WARN_ON's etc related to this. Call container functions only if a container is actually present on the group. Link: https://lore.kernel.org/r/5-v4-42cd2eb0e3eb+335a-vfio_iommufd_jgg@nvidia.com Reviewed-by: Kevin Tian Reviewed-by: Alex Williamson Tested-by: Alex Williamson Tested-by: Nicolin Chen Tested-by: Yi Liu Tested-by: Lixiao Yang Tested-by: Matthew Rosato Tested-by: Yu He Signed-off-by: Jason Gunthorpe

vfio: Introduce the DMA logging feature support

2022-09-08T18:59:00+00:00

Introduce the DMA logging feature support in the vfio core layer. It includes the processing of the device start/stop/report DMA logging UAPIs and calling the relevant driver 'op' to do the work. Specifically, Upon start, the core translates the given input ranges into an interval tree, checks for unexpected overlapping, non aligned ranges and then pass the translated input to the driver for start tracking the given ranges. Upon report, the core translates the given input user space bitmap and page size into an IOVA kernel bitmap iterator. Then it iterates it and call the driver to set the corresponding bits for the dirtied pages in a specific IOVA range. Upon stop, the driver is called to stop the previous started tracking. The next patches from the series will introduce the mlx5 driver implementation for the logging ops. Signed-off-by: Yishai Hadas Link: https://lore.kernel.org/r/20220908183448.195262-6-yishaih@nvidia.com Signed-off-by: Alex Williamson