kernel/linux.git/drivers/usb, branch v6.18.36

USB: serial: kl5kusb105: fix bulk-out buffer overflow

2026-06-19T11:44:04+00:00

commit 96d47e40bf9db4a9efd5c8fb53287a508d165f14 upstream. klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. Fixes: 60b3013cdaf3 ("USB: kl5usb105: reimplement using generic framework") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add usb-id for Dell Wireless DW5826e-m

2026-06-19T11:44:04+00:00

commit 1938fb9fe38c4f04a3f30bea44f8071c80a63be4 upstream. Add support for Dell DW5826e-m with USB-id 0x413c:0x81ea T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=81ea Rev= 5.04 S: Manufacturer=DELL S: Product=DW5826e-m Qualcomm Snapdragon X12 Global LTE-A S: SerialNumber=358988870177734 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jack Wu Reviewed-by: Lars Melin Cc: stable@vger.kernel.org [ johan: reserve also interface 4 ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()

2026-06-19T11:44:04+00:00

commit 0fd2b00b2d3d05e3eaa13342b3dfb0fa85c226ae upstream. build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_ti: fix heap overflow in get_manuf_info()

2026-06-19T11:44:04+00:00

commit 183c1076eca43bbb3e7bdf597456f91d81c73e74 upstream. get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel [ johan: amend commit message; also check for short descriptors ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: core: Fix SuperSpeed root hub wMaxPacketSize

2026-06-09T10:28:53+00:00

commit d1e280334b7f0a1df441e08bd1f6a1bcc36b3bbb upstream. There is no good reason to have wBytesPerInterval < wMaxPacketSize - either one is too low or the other too high, and we may want to warn about such descriptors. Start with cleaning up our own root hubs. USB 3.2 section 10.15.1 sets wMaxPacketSize and wBytesPerInterval of SuperSpeed hub status endpoints at 2 bytes, so reduce wMaxPacketSize from its former value of 4, which was derived from USB 2.0 spec and the kernel's USB_MAXCHILDREN limit. They don't apply because USB 3.2 10.15.2.1 specifies SuperSpeed hubs to have up to 15 ports. Suggested-by: Mathias Nyman Signed-off-by: Michal Pecio Link: https://patch.msgid.link/20260518073121.7bc1da0f.michal.pecio@gmail.com Signed-off-by: Greg Kroah-Hartman

xhci: tegra: Fix ghost USB device on dual-role port unplug

2026-06-09T10:28:52+00:00

[ Upstream commit 5a4c828b8b29b47534814ade26d9aee09d5101fc ] When a USB device is unplugged from the dual-role port, the device-mode path in tegra_xhci_id_work() explicitly clears both SS and HS port power via direct hub_control ClearPortFeature(POWER) calls. This preempts the xHCI controller's normal disconnect processing -- PORT_CSC is never generated, the USB core never sees the disconnect, and the device remains in its internal tree as a ghost visible in lsusb. Add an otg_set_port_power flag to control whether the dual-role switch path performs explicit port power management. SoCs that need it (Tegra124 / Tegra210 / Tegra186) set the flag; later SoCs (Tegra194 and beyond) rely on the PHY mode change to handle disconnect naturally and skip all port power calls. Within the port power path, otg_reset_sspi additionally gates the SSPI reset sequence on host-mode entry for SoCs that require it. Flags set per SoC: Tegra124, Tegra186 -> otg_set_port_power Tegra210 -> otg_set_port_power, otg_reset_sspi Tegra194 and later -> (none) [ Backport to 6.18.y: keep the host-mode snapshot in the existing tegra->lock section, retain pm_runtime_mark_last_busy() in the host port-power path, preserve str_on_off(), and resolve context around the SoC ops/Tegra234 entries. ] Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support") Cc: stable@vger.kernel.org Signed-off-by: Wei-Cheng Chen Link: https://patch.msgid.link/20260505112630.217704-1-weichengc@nvidia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: serial: mct_u232: fix memory corruption with small endpoint

2026-06-09T10:28:52+00:00

commit 915b36d701950503c4ea0f6e314b10868e59fce3 upstream. The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: digi_acceleport: fix memory corruption with small endpoints

2026-06-09T10:28:52+00:00

commit cb3560e8eab1dfa1cac1ed52631adf8ec6ff2cd5 upstream. Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: cypress_m8: fix memory corruption with small endpoint

2026-06-09T10:28:52+00:00

commit e1a9d791fd66ab2431b9e6f6f835823809869047 upstream. Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Cc: stable@vger.kernel.org # 2.6.26 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold [ johan: adjust context for 6.18 ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: dwc3: xilinx: fix error handling in zynqmp init error paths

2026-06-09T10:28:52+00:00

[ Upstream commit c1a0ecbf32c4b397353204e2ec94c5bb9f3300ed ] Fix error handling and resource cleanup i.e remove invalid phy_exit() after failed phy_init(), route failures through proper cleanup paths and return 0 explicitly on success. Fixes: 84770f028fab ("usb: dwc3: Add driver for Xilinx platforms") Cc: stable@vger.kernel.org Acked-by: Thinh Nguyen Signed-off-by: Radhey Shyam Pandey Link: https://patch.msgid.link/20260519115529.2980421-1-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman