kernel/linux.git/drivers/usb, branch v5.4.151

usb: cdns3: fix race condition before setting doorbell

2021-10-06T13:42:30+00:00

commit b69ec50b3e55c4b2a85c8bc46763eaf33060584 upstream For DEV_VER_V3 version there exist race condition between clearing ep_sts.EP_STS_TRBERR and setting ep_cmd.EP_CMD_DRDY bit. Setting EP_CMD_DRDY will be ignored by controller when EP_STS_TRBERR is set. So, between these two instructions we have a small time gap in which the EP_STS_TRBERR can be set. In such case the transfer will not start after setting doorbell. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: # 5.4.x Tested-by: Aswath Govindraju Reviewed-by: Aswath Govindraju Signed-off-by: Pawel Laszczak Signed-off-by: Sasha Levin

xhci: Set HCD flag to defer primary roothub registration

2021-09-30T08:09:22+00:00

commit b7a0a792f864583207c593b50fd1b752ed89f4c1 upstream. Set "HCD_FLAG_DEFER_RH_REGISTER" to hcd->flags in xhci_run() to defer registering primary roothub in usb_add_hcd(). This will make sure both primary roothub and secondary roothub will be registered along with the second HCD. This is required for cold plugged USB devices to be detected in certain PCIe USB cards (like Inateck USB card connected to AM64 EVM or J7200 EVM). CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-3-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add device id for Foxconn T99W265

2021-09-30T08:09:22+00:00

commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream. Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: remove duplicate USB device ID

2021-09-30T08:09:22+00:00

commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream. The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Telit LN920 compositions

2021-09-30T08:09:21+00:00

commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream. This patch adds the following Telit LN920 compositions: 0x1060: tty, adb, rmnet, tty, tty, tty, tty 0x1061: tty, adb, mbim, tty, tty, tty, tty 0x1062: rndis, tty, adb, tty, tty, tty, tty 0x1063: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Carlo Lobrano Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com Reviewed-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mos7840: remove duplicated 0xac24 device ID

2021-09-30T08:09:21+00:00

commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream. 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: Add support for deferring roothub registration

2021-09-30T08:09:21+00:00

commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7 upstream. It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

Re-enable UAS for LaCie Rugged USB3-FW with fk quirk

2021-09-30T08:09:21+00:00

commit ce1c42b4dacfe7d71c852d8bf3371067ccba865c upstream. Further testing has revealed that LaCie Rugged USB3-FW does work with uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled. Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/ Cc: stable Suggested-by: Hans de Goede Reviewed-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Julian Sikorski Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: fix minor-number release

2021-09-30T08:09:21+00:00

commit 91fac0741d4817945c6ee0a17591421e7f5ecb86 upstream. If the driver runs out of minor numbers it would release minor 0 and allow another device to claim the minor while still in use. Fortunately, registering the tty class device of the second device would fail (with a stack dump) due to the sysfs name collision so no memory is leaked. Fixes: cae2bc768d17 ("usb: cdc-acm: Decrement tty port's refcount if probe() fail") Cc: stable@vger.kernel.org # 4.19 Cc: Jaejoong Kim Acked-by: Oliver Neukum Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210907082318.7757-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter

2021-09-30T08:09:21+00:00

commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream. Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman