kernel/linux.git/drivers/usb/typec, branch v6.1.2

usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()

2022-12-31T12:32:42+00:00

[ Upstream commit dc18a4c7b3bd447cef2395deeb1f6ac16dfaca0e ] I got the following report while doing fault injection test: OF: ERROR: memory leak, expected refcount 1 instead of 4, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/tcpc@60/connector If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to avoid refcount leak. Fixes: d016cbe4d7ac ("usb: typec: Support the WUSB3801 port controller") Reviewed-by: Heikki Krogerus Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221203071027.3808308-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: tipd: Fix typec_unregister_port error paths

2022-12-31T12:32:39+00:00

[ Upstream commit 4c8f27ba9ede0118cac9d775204f9b0ecdb877b0 ] typec_unregister_port is only called for some error paths after typec_register_port was successful. Ensure it's called in all cases. Fixes: 92440202a880 ("usb: typec: tipd: Only update power status on IRQ") Signed-off-by: Sven Peter Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221114174449.34634-3-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: tipd: Fix spurious fwnode_handle_put in error path

2022-12-31T12:32:39+00:00

[ Upstream commit 782c70edc4852a5d39be12377a85501546236212 ] The err_role_put error path always calls fwnode_handle_put to release the fwnode. This path can be reached after probe itself has already released that fwnode though. Fix that by moving fwnode_handle_put in the happy path to the very end. Fixes: 18a6c866bb19 ("usb: typec: tps6598x: Add USB role switching logic") Signed-off-by: Sven Peter Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221114174449.34634-2-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: tipd: Cleanup resources if devm_tps6598_psy_register fails

2022-12-31T12:32:39+00:00

[ Upstream commit 19c220e9ab00f50edefb9667e3101e84a5112df2 ] We can't just return if devm_tps6598_psy_register fails since previous resources are not devres managed and have yet to be cleaned up. Fixes: 10eb0b6ac63a ("usb: typec: tps6598x: Export some power supply properties") Signed-off-by: Sven Peter Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221114174449.34634-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: tcpci: fix of node refcount leak in tcpci_register_port()

2022-12-31T12:32:39+00:00

[ Upstream commit 0384e87e3fec735e47f1c133c796f32ef7a72a9b ] I got the following report while doing device(mt6370-tcpc) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@34/tcpc/connector The 'fwnode' set in tcpci_parse_config() which is called in tcpci_register_port(), its node refcount is increased in device_get_named_child_node(). It needs be put while exiting, so call fwnode_handle_put() in the error path of tcpci_register_port() and in tcpci_unregister_port() to avoid leak. Fixes: 5e85a04c8c0d ("usb: typec: add fwnode to tcpc") Signed-off-by: Yang Yingliang Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221121062416.1026192-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: Check for ops->exit instead of ops->enter in altmode_exit

2022-12-31T12:32:39+00:00

[ Upstream commit b6ddd180e3d9f92c1e482b3cdeec7dda086b1341 ] typec_altmode_exit checks if ops->enter is not NULL but then calls ops->exit a few lines below. Fix that and check for the function pointer it's about to call instead. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Signed-off-by: Sven Peter Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221114165924.33487-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: typec: ucsi: Resume in separate work

2022-12-21T16:48:10+00:00

commit e0dced9c7d4763fd97c86a13902d135f03cc42eb upstream. It can take more than one second to check each connector when the system is resumed. So if you have, say, eight connectors, it may take eight seconds for ucsi_resume() to finish. That's a bit too much. This will modify ucsi_resume() so that it schedules a work where the interface is actually resumed instead of checking the connectors directly. The connections will also be checked in separate tasks which are queued for each connector separately. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216706 Fixes: 99f6d4361113 ("usb: typec: ucsi: Check the connection on resume") Cc: Reported-by: Todd Brandt Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221123093021.25981-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler

2022-11-08T15:51:21+00:00

If reading TPS_REG_INT_EVENT1/2 fails in the interrupt handler event1 and event2 may be uninitialized when they are used to determine IRQ_HANDLED vs. IRQ_NONE in the error path. Fixes: c7260e29dd20 ("usb: typec: tipd: Add short-circuit for no irqs") Fixes: 45188f27b3d0 ("usb: typec: tipd: Add support for Apple CD321X") Cc: stable Signed-off-by: Sven Peter Reviewed-by: Eric Curtin Reviewed-by: Heikki Krogerus Reviewed-by: Guido Günther Link: https://lore.kernel.org/r/20221102161542.30669-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman

usb: typec: mux: Enter safe mode only when pins need to be reconfigured

2022-11-08T15:51:06+00:00

There is no point to enter safe mode during DP/TBT configuration if the DP/TBT was already configured in mux. This is because safe mode is only applicable when there is a need to reconfigure the pins in order to avoid damage within/to port partner. In some chrome systems, IOM/mux is already configured before OS comes up. Thus, when driver is probed, it blindly enters safe mode due to PD negotiations but only after gfx driver lowers dp_phy_ownership, will the IOM complete safe mode and send an ack to PMC. Since, that never happens, we see IPC timeout. Hence, allow safe mode only when pin reconfiguration is not required, which makes sense. Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect") Cc: stable Signed-off-by: Rajat Khandelwal Signed-off-by: Lee Shawn C Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221024171611.181468-1-rajat.khandelwal@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: acpi: Implement resume callback

2022-10-22T10:39:01+00:00

The ACPI driver needs to resume the interface by calling ucsi_resume(). Otherwise we may fail to detect connections and disconnections that happen while the system is suspended. Link: https://bugzilla.kernel.org/show_bug.cgi?id=210425 Fixes: a94ecde41f7e ("usb: typec: ucsi: ccg: enable runtime pm support") Cc: Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221007100951.43798-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman