kernel/linux.git/drivers/usb/typec, branch v4.17.1

usb: typec: tps6598x: handle block reads separately with plain-I2C adapters

2018-05-03T17:55:31+00:00

If the I2C adapter that the PD controller is attached to does not support SMBus protocol, the driver needs to handle block reads separately. The first byte returned in block read protocol will show the total number of bytes. It needs to be stripped away. This is handled separately in the driver only because right now we have no way of requesting the used protocol with regmap-i2c. This is in practice a workaround for what is really a problem in regmap-i2c. The other option would have been to register custom regmap, or not use regmap at all, however, since the solution is very simple, I choose to use it in this case for convenience. It is easy to remove once we figure out how to handle this kind of cases in regmap-i2c. Fixes: 0a4c005bd171 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers") Reviewed-by: Guenter Roeck Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Release the role mux when exiting

2018-05-03T17:55:27+00:00

The ref count for the USB role switch device must be released after we are done using the switch. Fixes: c6962c29729c ("usb: typec: tcpm: Set USB role switch to device mode when configured as such") Signed-off-by: Heikki Krogerus Reviewed-by: Hans de Goede Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Increase command completion timeout value

2018-04-22T12:54:50+00:00

On some boards, under heavy load, the EC firmware is unable to complete commands even in one second. Increasing the command completion timeout value to five seconds. Reported-by: Quanxian Wang Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: fix tracepoint related build error

2018-04-22T12:45:12+00:00

There is the following build error with CONFIG_TYPEC_UCSI=m, CONFIG_FTRACE=y and CONFIG_TRACING=n: ERROR: "__tracepoint_ucsi_command" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_register_port" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_notify" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_reset_ppm" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_run_command" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_ack" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! ERROR: "__tracepoint_ucsi_connector_change" [drivers/usb/typec/ucsi/typec_ucsi.ko] undefined! This compination is quite hard to create because CONFIG_TRACING gets selected only in rare cases without CONFIG_FTRACE. The build failure is caused by conditionally compiling trace.c depending on the wrong option CONFIG_FTRACE. Change this to depend on CONFIG_TRACING like other users of tracepoints do. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Signed-off-by: Tobias Regnery Acked-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: driver for Pericom PI3USB30532 Type-C cross switch

2018-03-22T12:49:28+00:00

Add a driver for the Pericom PI3USB30532 Type-C cross switch / mux chip found on some devices with a Type-C port. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Use new Type-C switch/mux and usb-role-switch functions

2018-03-22T12:40:10+00:00

Remove the unused (not implemented anywhere) tcpc_mux_dev abstraction and replace it with calling the new typec_set_orientation, usb_role_switch_set and typec_set_mode functions. Signed-off-by: Hans de Goede Reviewed-by: Guenter Roeck Reviewed-by: Andy Shevchenko Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Set USB role switch to device mode when configured as such

2018-03-22T12:40:10+00:00

Setting the mux to MUX_NONE and the switch to USB_SWITCH_DISCONNECT when the data-role is device is not correct. Plenty of devices support operating as USB device through a (separate) USB device controller. We really need 2 different versions of USB_SWITCH_CONNECT, USB_SWITCH_CONNECT_HOST and USB_SWITCH_DEVICE. Rather then modifying the tcpc_usb_switch enum for this, simply remove it and switch to the usb_role enum which provides exactly this, this will save use needing to convert betweent the 2 enums when calling an usb-role-switch driver later. Besides switching to the usb_role type, this commit also actually sets the mux to TYPEC_MUX_USB and the switch to USB_ROLE_DEVICE instead of setting both to none when the data-role is device. This commit also makes tcpm_reset_port() call tcpm_mux_set(port, TYPEC_MUX_NONE, USB_ROLE_NONE) so that the mux and switch do _not_ stay in their last mode after a detach. Signed-off-by: Hans de Goede Reviewed-by: Guenter Roeck Reviewed-by: Andy Shevchenko Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: Separate the definitions for data and power roles

2018-03-22T12:40:10+00:00

USB Type-C specification v1.2 separated the power and data roles more clearly. Dual-Role-Data term was introduced, and the meaning of DRP was changed from "Dual-Role-Port" to "Dual-Role-Power". In order to allow the port drivers to describe the capabilities of the ports more clearly according to the newest specifications, introducing separate definitions for the data roles. Reviewed-by: Guenter Roeck Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: typec: API for controlling USB Type-C Multiplexers

2018-03-22T12:40:10+00:00

USB Type-C connectors consist of various muxes and switches that route the pins on the connector to the right locations. The USB Type-C drivers need to be able to control the muxes, as they are the ones that know things like the cable plug orientation, and the current mode that was negotiated with the partner. This introduces a small API for registering and controlling cable plug orientation switches, and separate small API for registering and controlling pin multiplexer/demultiplexer switches that are needed with Accessory/Alternate Modes. Reviewed-by: Hans de Goede Reviewed-by: Andy Shevchenko Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

Merge branch 4.16-rc6 into usb-next

2018-03-20T08:56:08+00:00

We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman