kernel/linux.git/drivers/usb/storage, branch v5.2.16

USB: storage: ums-realtek: Whitelist auto-delink support

2019-09-06T08:23:41+00:00

commit 1902a01e2bcc3abd7c9a18dc05e78c7ab4a53c54 upstream. Auto-delink requires writing special registers to ums-realtek devices. Unconditionally enable auto-delink may break newer devices. So only enable auto-delink by default for the original three IDs, 0x0138, 0x0158 and 0x0159. Realtek is working on a patch to properly support auto-delink for other IDs. BugLink: https://bugs.launchpad.net/bugs/1838886 Signed-off-by: Kai-Heng Feng Acked-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman

USB: storage: ums-realtek: Update module parameter description for auto_delink_en

2019-09-06T08:23:40+00:00

commit f6445b6b2f2bb1745080af4a0926049e8bca2617 upstream. The option named "auto_delink_en" is a bit misleading, as setting it to false doesn't really disable auto-delink but let auto-delink be firmware controlled. Update the description to reflect the real usage of this parameter. Signed-off-by: Kai-Heng Feng Cc: stable Link: https://lore.kernel.org/r/20190827173450.13572-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman

usb-storage: Add new JMS567 revision to unusual_devs

2019-09-06T08:23:39+00:00

commit 08d676d1685c2a29e4d0e1b0242324e564d4589e upstream. Revision 0x0117 suffers from an identical issue to earlier revisions, therefore it should be added to the quirks list. Signed-off-by: Henk van der Laan Cc: stable Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.com Signed-off-by: Greg Kroah-Hartman

usb-storage: Add a limitation for blk_queue_max_hw_sectors()

2019-07-31T05:24:56+00:00

commit d74ffae8b8dd17eaa8b82fc163e6aa2076dc8fb1 upstream. This patch fixes an issue that the following error happens on swiotlb environment: xhci-hcd ee000000.usb: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 1338 (slots) On the kernel v5.1, block settings of a usb-storage with SuperSpeed were the following so that the block layer will allocate buffers up to 64 KiB, and then the issue didn't happen. max_segment_size = 65536 max_hw_sectors_kb = 1024 After the commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") is applied, the block settings are the following. So, the block layer will allocate buffers up to 1024 KiB, and then the issue happens: max_segment_size = 4294967295 max_hw_sectors_kb = 1024 To fix the issue, the usb-storage driver checks the maximum size of a mapping for the device and then adjusts the max_hw_sectors_kb if required. After this patch is applied, the block settings will be the following, and then the issue doesn't happen. max_segment_size = 4294967295 max_hw_sectors_kb = 256 Fixes: 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary") Cc: stable Signed-off-by: Yoshihiro Shimoda Acked-by: Alan Stern Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/1563793105-20597-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman

USB: usb-storage: Add new ID to ums-realtek

2019-06-05T09:52:42+00:00

There is one more Realtek card reader requires ums-realtek to work correctly. Add the device ID to support it. Signed-off-by: Kai-Heng Feng Cc: stable Signed-off-by: Greg Kroah-Hartman

treewide: prefix header search paths with $(srctree)/

2019-05-18T02:49:57+00:00

Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada

Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2019-05-08T17:03:52+00:00

Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver patches for 5.2-rc1 There is the usual set of: - USB gadget updates - PHY driver updates and additions - USB serial driver updates and fixes - typec updates and new chips supported - mtu3 driver updates - xhci driver updates - other tiny driver updates Nothing really interesting, just constant forward progress. All of these have been in linux-next for a while with no reported issues. The usb-gadget and usb-serial trees were merged a bit "late", but both of them had been in linux-next before they got merged here last Friday" * tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits) USB: serial: f81232: implement break control USB: serial: f81232: add high baud rate support USB: serial: f81232: clear overrun flag USB: serial: f81232: fix interrupt worker not stop usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA usb: dwc3: Fix default lpm_nyet_threshold value usb: dwc3: debug: Print GET_STATUS(device) tracepoint usb: dwc3: Do core validation early on probe usb: dwc3: gadget: Set lpm_capable usb: gadget: atmel: tie wake lock to running clock usb: gadget: atmel: support USB suspend usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask dwc2: gadget: Fix completed transfer size calculation in DDMA usb: dwc2: Set lpm mode parameters depend on HW configuration usb: dwc2: Fix channel disable flow usb: dwc2: Set actual frame number for completed ISOC transfer usb: gadget: do not use __constant_cpu_to_le16 usb: dwc2: gadget: Increase descriptors count for ISOC's usb: introduce usb_ep_type_string() function usb: dwc3: move synchronize_irq() out of the spinlock protected block ...

UAS: fix alignment of scatter/gather segments

2019-04-30T15:51:42+00:00

This is the UAS version of 747668dbc061b3e62bc1982767a3a1f9815fcf0e usb-storage: Set virt_boundary_mask to avoid SG overflows We are not as likely to be vulnerable as storage, as it is unlikelier that UAS is run over a controller without native support for SG, but the issue exists. The issue has been existing since the inception of the driver. Fixes: 115bb1ffa54c ("USB: Add UAS driver") Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: core: Fix bug caused by duplicate interface PM usage counter

2019-04-19T19:15:13+00:00

The syzkaller fuzzer reported a bug in the USB hub driver which turned out to be caused by a negative runtime-PM usage counter. This allowed a hub to be runtime suspended at a time when the driver did not expect it. The symptom is a WARNING issued because the hub's status URB is submitted while it is already active: URB 0000000031fb463e submitted while active WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363 The negative runtime-PM usage count was caused by an unfortunate design decision made when runtime PM was first implemented for USB. At that time, USB class drivers were allowed to unbind from their interfaces without balancing the usage counter (i.e., leaving it with a positive count). The core code would take care of setting the counter back to 0 before allowing another driver to bind to the interface. Later on when runtime PM was implemented for the entire kernel, the opposite decision was made: Drivers were required to balance their runtime-PM get and put calls. In order to maintain backward compatibility, however, the USB subsystem adapted to the new implementation by keeping an independent usage counter for each interface and using it to automatically adjust the normal usage counter back to 0 whenever a driver was unbound. This approach involves duplicating information, but what is worse, it doesn't work properly in cases where a USB class driver delays decrementing the usage counter until after the driver's disconnect() routine has returned and the counter has been adjusted back to 0. Doing so would cause the usage counter to become negative. There's even a warning about this in the USB power management documentation! As it happens, this is exactly what the hub driver does. The kick_hub_wq() routine increments the runtime-PM usage counter, and the corresponding decrement is carried out by hub_event() in the context of the hub_wq work-queue thread. This work routine may sometimes run after the driver has been unbound from its interface, and when it does it causes the usage counter to go negative. It is not possible for hub_disconnect() to wait for a pending hub_event() call to finish, because hub_disconnect() is called with the device lock held and hub_event() acquires that lock. The only feasible fix is to reverse the original design decision: remove the duplicate interface-specific usage counter and require USB drivers to balance their runtime PM gets and puts. As far as I know, all existing drivers currently do this. Signed-off-by: Alan Stern Reported-and-tested-by: syzbot+7634edaea4d0b341c625@syzkaller.appspotmail.com CC: Signed-off-by: Greg Kroah-Hartman

usb-storage: Set virt_boundary_mask to avoid SG overflows

2019-04-16T18:43:34+00:00

The USB subsystem has always had an unusual requirement for its scatter-gather transfers: Each element in the scatterlist (except the last one) must have a length divisible by the bulk maxpacket size. This is a particular issue for USB mass storage, which uses SG lists created by the block layer rather than setting up its own. So far we have scraped by okay because most devices have a logical block size of 512 bytes or larger, and the bulk maxpacket sizes for USB 2 and below are all <= 512. However, USB 3 has a bulk maxpacket size of 1024. Since the xhci-hcd driver includes native SG support, this hasn't mattered much. But now people are trying to use USB-3 mass storage devices with USBIP, and the vhci-hcd driver currently does not have full SG support. The result is an overflow error, when the driver attempts to implement an SG transfer of 63 512-byte blocks as a single 3584-byte (7 blocks) transfer followed by seven 4096-byte (8 blocks) transfers. The device instead sends 31 1024-byte packets followed by a 512-byte packet, and this overruns the first SG buffer. Ideally this would be fixed by adding better SG support to vhci-hcd. But for now it appears we can work around the problem by asking the block layer to respect the maxpacket limitation, through the use of the virt_boundary_mask. Signed-off-by: Alan Stern Reported-by: Seth Bollinger Tested-by: Seth Bollinger CC: Ming Lei Cc: stable Signed-off-by: Greg Kroah-Hartman