kernel/linux.git/drivers/usb/storage, branch v4.19.112

usb: storage: Add quirk for Samsung Fit flash

2020-03-11T13:14:57+00:00

commit 86d92f5465958752481269348d474414dccb1552 upstream. Current driver has 240 (USB2.0) and 2048 (USB3.0) as max_sectors, e.g., /sys/bus/scsi/devices/0:0:0:0/max_sectors If data access times out, driver error handling will issue a port reset. Sometimes Samsung Fit (090C:1000) flash disk will not respond to later Set Address or Get Descriptor command. Adding this quirk to limit max_sectors to 64 sectors to avoid issue occurring. Signed-off-by: Jim Lin Acked-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/1583158895-31342-1-git-send-email-jilin@nvidia.com Signed-off-by: Greg Kroah-Hartman

usb: uas: fix a plug & unplug racing

2020-02-28T15:38:46+00:00

commit 3e99862c05a9caa5a27969f41566b428696f5a9a upstream. When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk. There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run. In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened. In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread. Signed-off-by: EJ Hsu Acked-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.com Signed-off-by: Greg Kroah-Hartman

usb-storage: Disable UAS on JMicron SATA enclosure

2020-02-01T09:37:10+00:00

[ Upstream commit bc3bdb12bbb3492067c8719011576370e959a2e6 ] Steve Ellis reported incorrect block sizes and alignement offsets with a SATA enclosure. Adding a quirk to disable UAS fixes the problems. Reported-by: Steven Ellis Cc: Pacho Ramos Signed-off-by: Laura Abbott Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: uas: heed CAPACITY_HEURISTICS

2019-12-17T19:34:30+00:00

commit 335cbbd5762d5e5c67a8ddd6e6362c2aa42a328f upstream. There is no need to ignore this flag. We should be as close to storage in that regard as makes sense, so honor flags whose cost is tiny. Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20191114112758.32747-3-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

USB: uas: honor flag to avoid CAPACITY16

2019-12-17T19:34:29+00:00

commit bff000cae1eec750d62e265c4ba2db9af57b17e1 upstream. Copy the support over from usb-storage to get feature parity Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20191114112758.32747-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

usb-storage: Revert commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")

2019-11-06T12:06:16+00:00

commit 9a976949613132977098fc49510b46fa8678d864 upstream. Commit 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that this interacts badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting for usb-storage. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to fix the swiotlb problem, this patch reverts commit 747668dbc061. Reported-and-tested-by: Piergiorgio Sartor Link: https://marc.info/?l=linux-usb&m=157134199501202&w=2 Signed-off-by: Alan Stern CC: Seth Bollinger CC: Fixes: 747668dbc061 ("usb-storage: Set virt_boundary_mask to avoid SG overflows") Acked-by: Christoph Hellwig Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910211145520.1673-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman

UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")

2019-11-06T12:06:15+00:00

commit 1186f86a71130a7635a20843e355bb880c7349b2 upstream. Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"), copying a similar commit for usb-storage, attempted to solve a problem involving scatter-gather I/O and USB/IP by setting the virt_boundary_mask for mass-storage devices. However, it now turns out that the analogous change in usb-storage interacted badly with commit 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary"), which was added later. A typical error message is: ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes), total 32768 (slots), used 97 (slots) There is no longer any reason to keep the virt_boundary_mask setting in the uas driver. It was needed in the first place only for handling devices with a block size smaller than the maxpacket size and where the host controller was not capable of fully general scatter-gather operation (that is, able to merge two SG segments into a single USB packet). But: High-speed or slower connections never use a bulk maxpacket value larger than 512; The SCSI layer does not handle block devices with a block size smaller than 512 bytes; All the host controllers capable of SuperSpeed operation can handle fully general SG; Since commit ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver") was merged, the USB/IP driver can also handle SG. Therefore all supported device/controller combinations should be okay with no need for any special virt_boundary_mask. So in order to head off potential problems similar to those affecting usb-storage, this patch reverts commit 3ae62a42090f. Signed-off-by: Alan Stern CC: Oliver Neukum CC: Acked-by: Christoph Hellwig Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments") Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman

USB: storage: ums-realtek: Whitelist auto-delink support

2019-09-06T08:22:16+00:00

commit 1902a01e2bcc3abd7c9a18dc05e78c7ab4a53c54 upstream. Auto-delink requires writing special registers to ums-realtek devices. Unconditionally enable auto-delink may break newer devices. So only enable auto-delink by default for the original three IDs, 0x0138, 0x0158 and 0x0159. Realtek is working on a patch to properly support auto-delink for other IDs. BugLink: https://bugs.launchpad.net/bugs/1838886 Signed-off-by: Kai-Heng Feng Acked-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/20190827173450.13572-2-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman

USB: storage: ums-realtek: Update module parameter description for auto_delink_en

2019-09-06T08:22:16+00:00

commit f6445b6b2f2bb1745080af4a0926049e8bca2617 upstream. The option named "auto_delink_en" is a bit misleading, as setting it to false doesn't really disable auto-delink but let auto-delink be firmware controlled. Update the description to reflect the real usage of this parameter. Signed-off-by: Kai-Heng Feng Cc: stable Link: https://lore.kernel.org/r/20190827173450.13572-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman

usb-storage: Add new JMS567 revision to unusual_devs

2019-09-06T08:22:14+00:00

commit 08d676d1685c2a29e4d0e1b0242324e564d4589e upstream. Revision 0x0117 suffers from an identical issue to earlier revisions, therefore it should be added to the quirks list. Signed-off-by: Henk van der Laan Cc: stable Link: https://lore.kernel.org/r/20190816200847.21366-1-opensource@henkvdlaan.com Signed-off-by: Greg Kroah-Hartman