kernel/linux.git/drivers/usb/storage, branch v3.18.100

uas: fix comparison for error code

2018-03-18T10:15:44+00:00

commit 9a513c905bb95bef79d96feb08621c1ec8d8c4bb upstream. A typo broke the comparison. Fixes: cbeef22fd611 ("usb: uas: unconditionally bring back host after reset") Signed-off-by: Oliver Neukum CC: stable@kernel.org Acked-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

usb: uas: unconditionally bring back host after reset

2018-02-07T19:07:57+00:00

commit cbeef22fd611c4f47c494b821b2b105b8af970bb upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by: Oliver Neukum Reported-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

uas: ignore UAS for Norelsys NS1068(X) chips

2018-01-17T08:29:31+00:00

commit 928afc85270753657b5543e052cc270c279a3fe9 upstream. The UAS mode of Norelsys NS1068(X) is reported to fail to work on several platforms with the following error message: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event for unknown stream ring slot 1 ep 8 xhci-hcd xhci-hcd.0.auto: @00000000bf04a400 00000000 00000000 1b000000 01098001 And when trying to mount a partition on the disk the disk will disconnect from the USB controller, then after re-connecting the device will be offlined and not working at all. Falling back to USB mass storage can solve this problem, so ignore UAS function of this chip. Signed-off-by: Icenowy Zheng Acked-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

USB: uas and storage: Add US_FL_BROKEN_FUA for another JMicron JMS567 ID

2017-12-20T09:01:28+00:00

commit 62354454625741f0569c2cbe45b2d192f8fd258e upstream. There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails with the following error: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [sda] tag#0 Sense Key : Illegal Request [current] [sda] tag#0 Add. Sense: Invalid field in cdb The issue occurs both with UAS (occasionally) and mass storage (immediately after mounting a FS on a disk in the enclosure). Enabling US_FL_BROKEN_FUA quirk solves this issue. This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure for both UAS and mass storage. Signed-off-by: David Kozub Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices

2017-12-09T17:29:48+00:00

commit 7fee72d5e8f1e7b8d8212e28291b1a0243ecf2f1 upstream. We've been adding this as a quirk on a per device basis hoping that newer disk enclosures would do better, but that has not happened, so simply apply this quirk to all Seagate devices. Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

USB: uas: fix bug in handling of alternate settings

2017-10-12T07:18:01+00:00

commit 786de92b3cb26012d3d0f00ee37adf14527f35c4 upstream. The uas driver has a subtle bug in the way it handles alternate settings. The uas_find_uas_alt_setting() routine returns an altsetting value (the bAlternateSetting number in the descriptor), but uas_use_uas_driver() then treats that value as an index to the intf->altsetting array, which it isn't. Normally this doesn't cause any problems because the various alternate settings have bAlternateSetting values 0, 1, 2, ..., so the value is equal to the index in the array. But this is not guaranteed, and Andrey Konovalov used the syzkaller fuzzer with KASAN to get a slab-out-of-bounds error by violating this assumption. This patch fixes the bug by making uas_find_uas_alt_setting() return a pointer to the altsetting entry rather than either the value or the index. Pointers are less subject to misinterpretation. Signed-off-by: Alan Stern Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov CC: Oliver Neukum Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives

2017-10-12T07:18:01+00:00

commit 113f6eb6d50cfa5e2a1cdcf1678b12661fa272ab upstream. Kris Lindgren reports that without the NO_WP_DETECT flag, his Seagate external disk drive fails all write accesses. This regresssion dates back approximately to the start of the 4.x kernel releases. Signed-off-by: Alan Stern Reported-by: Kris Lindgren Signed-off-by: Greg Kroah-Hartman

uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069

2017-08-16T20:35:31+00:00

commit 89f23d51defcb94a5026d4b5da13faf4e1150a6f upstream. Similar to commit d595259fbb7a ("usb-storage: Add ignore-residue quirk for Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already present in unusual_uas.h. Both in same controller IC family. Issue is that MakeMKV fails during key exchange with installed bluray drive with following error: 002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0' Signed-off-by: Alan Swanson Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb: storage: return on error to avoid a null pointer dereference

2017-07-27T22:03:26+00:00

commit 446230f52a5bef593554510302465eabab45a372 upstream. When us->extra is null the driver is not initialized, however, a later call to osd200_scsi_to_ata is made that dereferences us->extra, causing a null pointer dereference. The code currently detects and reports that the driver is not initialized; add a return to avoid the subsequent dereference issue in this check. Thanks to Alan Stern for pointing out that srb->result needs setting to DID_ERROR << 16 Detected by CoverityScan, CID#100308 ("Dereference after null check") Signed-off-by: Colin Ian King Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: ene_usb6250: fix DMA to the stack

2017-05-25T12:17:56+00:00

commit 628c2893d44876ddd11602400c70606ade62e129 upstream. The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by: Alan Stern Reported-and-tested-by: Andreas Hartmann Signed-off-by: Greg Kroah-Hartman