kernel/linux.git/drivers/usb/serial, branch v7.1-rc6

USB: serial: cypress_m8: validate interrupt packet headers

2026-05-23T07:35:26+00:00

cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Cc: stable@vger.kernel.org # 2.6.26 [ johan: use constants in header length sanity checks ] Signed-off-by: Johan Hovold

USB: serial: safe_serial: fix memory corruption with small endpoint

2026-05-23T07:07:36+00:00

Make sure that the bulk-out buffer size is at least eight bytes to avoid user-controlled slab corruption in "safe" mode should a malicious device report a smaller size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: omninet: fix memory corruption with small endpoint

2026-05-23T07:07:30+00:00

Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: mxuport: fix memory corruption with small endpoint

2026-05-23T07:07:18+00:00

Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable@vger.kernel.org # 3.14 Cc: Andrew Lunn Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: cypress_m8: fix memory corruption with small endpoint

2026-05-22T14:07:08+00:00

Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size. Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Cc: stable@vger.kernel.org # 2.6.26 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: option: add missing RSVD(5) flag for Rolling RW135R-GL

2026-05-21T07:53:59+00:00

The RW135R-GL entry added in commit 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL") was missing the .driver_info = RSVD(5) flag used by other Rolling Wireless MBIM laptop modules (e.g. RW135-GL and RW350-GL). Without this flag, the option driver incorrectly binds to the reserved ADB interface (If#5) in multi-interface USB modes, causing AT/MBIM communication failures after mode switching. This matches the handling of other Rolling Wireless MBIM devices. - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, diag, AT, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, diag, AT, ADB, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms - VID:PID 33f8:1003, RW135R-GL for laptop debug M.2 cards (with MBIM interface for Linux/Chrome OS) 0x1003: mbim, pipe Here are the outputs of usb-devices: T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=02 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=1003 Rev= 5.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling RW135R-GL Module S: SerialNumber=12345678 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Fixes: 01e8d0f74222 ("USB: serial: option: add support for Rolling Wireless RW135R-GL") Signed-off-by: Wanquan Zhong Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: option: add MeiG SRM813Q

2026-05-21T07:48:00+00:00

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module. The module can be put in different modes via AT commands to enable/disable GPS functionality: MODEM - PPP mode(2dee:4d63): AT+SER=1,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: MODEM If#= 3: AT P: Vendor=2dee ProdID=4d63 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms NMEA mode(2dee:4d64): AT+SER=51,1 If#= 0: RMNET If#= 1: DIAG/ADB If#= 2: NMEA If#= 3: AT P: Vendor=2dee ProdID=4d64 Rev=05.15 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=1bd51f0e C: #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Signed-off-by: Jan Volckaert Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold

USB: serial: mct_u232: fix missing interrupt-in transfer sanity check

2026-05-20T14:27:10+00:00

Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: mct_u232: fix memory corruption with small endpoint

2026-05-20T14:27:00+00:00

The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: keyspan: fix missing indat transfer sanity check

2026-05-20T14:26:48+00:00

Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data. Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Cc: stable@vger.kernel.org # 2.6.23 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold