kernel/linux.git/drivers/usb/serial, branch v7.0.13

USB: serial: kl5kusb105: fix bulk-out buffer overflow

2026-06-19T11:47:59+00:00

commit 96d47e40bf9db4a9efd5c8fb53287a508d165f14 upstream. klsi_105_prepare_write_buffer() is called by the generic write path with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It stores a two-byte length header at the start of the buffer and copies the payload from the write fifo starting at buf + KLSI_HDR_LEN, but passes the full buffer size as the number of bytes to copy: count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, &port->lock); When the fifo holds at least size bytes, size bytes are copied starting two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for the header as safe_serial already does. Writing bulk_out_size or more bytes to the tty triggers a slab out-of-bounds write, observed with KASAN by emulating the device with dummy_hcd and raw-gadget: BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0 Write of size 64 at addr ffff888112c62202 by task python3 kfifo_copy_out klsi_105_prepare_write_buffer [kl5kusb105] usb_serial_generic_write_start [usbserial] Allocated by task 139: usb_serial_probe [usbserial] The buggy address is located 2 bytes inside of allocated 64-byte region The out-of-bounds write no longer occurs with this change applied. Fixes: 60b3013cdaf3 ("USB: kl5usb105: reimplement using generic framework") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-8 Signed-off-by: HyeongJun An Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add usb-id for Dell Wireless DW5826e-m

2026-06-19T11:47:59+00:00

commit 1938fb9fe38c4f04a3f30bea44f8071c80a63be4 upstream. Add support for Dell DW5826e-m with USB-id 0x413c:0x81ea T: Bus=03 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=81ea Rev= 5.04 S: Manufacturer=DELL S: Product=DW5826e-m Qualcomm Snapdragon X12 Global LTE-A S: SerialNumber=358988870177734 C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#=12 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#=12 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#=13 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#=13 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jack Wu Reviewed-by: Lars Melin Cc: stable@vger.kernel.org [ johan: reserve also interface 4 ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_ti: fix heap overflow in build_i2c_fw_hdr()

2026-06-19T11:47:59+00:00

commit 0fd2b00b2d3d05e3eaa13342b3dfb0fa85c226ae upstream. build_i2c_fw_hdr() allocates a fixed-size buffer of (16*1024 - 512) + sizeof(struct ti_i2c_firmware_rec) bytes, then copies le16_to_cpu(img_header->Length) bytes into it without validating that Length fits within the available space after the firmware record header. img_header->Length is a __le16 from the firmware file and can be up to 65535. check_fw_sanity() validates the total firmware size but not img_header->Length specifically. Fix by rejecting images where img_header->Length exceeds the available destination space. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_ti: fix heap overflow in get_manuf_info()

2026-06-19T11:47:59+00:00

commit 183c1076eca43bbb3e7bdf597456f91d81c73e74 upstream. get_manuf_info() reads le16_to_cpu(rom_desc->Size) bytes from the device I2C EEPROM into a buffer allocated with kmalloc_obj(), which is sizeof(struct edge_ti_manuf_descriptor) = 10 bytes. The Size field comes from the device and is only validated (in check_i2c_image()) to make sure the descriptor fits within TI_MAX_I2C_SIZE (16384 bytes), not against the destination buffer size. A malicious USB device can therefore set Size to any value up to 16377, causing a heap overflow of up to 16367 bytes when plugged into a host running this driver. valid_csum() is called after read_rom() and also iterates buffer[0..Size-1], compounding the out-of-bounds access. Fix by rejecting descriptors with unexpected length before calling read_rom(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Adrian Korwel [ johan: amend commit message; also check for short descriptors ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mct_u232: fix missing interrupt-in transfer sanity check

2026-06-09T10:32:44+00:00

commit 245aba83e3c288e176ed037a1f6b618b09e92ed8 upstream. Add the missing sanity check on the size of interrupt-in transfers to avoid parsing stale or uninitialised slab data (and leaking it to user space). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mct_u232: fix memory corruption with small endpoint

2026-06-09T10:32:44+00:00

commit 915b36d701950503c4ea0f6e314b10868e59fce3 upstream. The driver overrides the maximum transfer size for a specific device which only accepts 16 byte packets for its 32 byte bulk-out endpoint. Make sure to never increase the maximum transfer size to prevent slab corruption should a malicious device report a smaller endpoint max packet size than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mxuport: fix memory corruption with small endpoint

2026-06-09T10:32:44+00:00

commit 4085f0dbb1ce2251c9a5938d693de6593f0ab2bd upstream. Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size. Fixes: ee467a1f2066 ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Cc: stable@vger.kernel.org # 3.14 Cc: Andrew Lunn Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: keyspan: fix missing indat transfer sanity check

2026-06-09T10:32:44+00:00

commit ab8336a7e414f018430aa1af3a46944032f7ff96 upstream. Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data. Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Cc: stable@vger.kernel.org # 2.6.23 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: digi_acceleport: fix memory corruption with small endpoints

2026-06-09T10:32:44+00:00

commit cb3560e8eab1dfa1cac1ed52631adf8ec6ff2cd5 upstream. Add the missing bulk-out buffer size sanity checks to avoid out-of-bounds memory accesses or slab corruption should a malicious device report smaller buffers than expected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: cypress_m8: validate interrupt packet headers

2026-06-09T10:32:43+00:00

commit 9f9bfc80c67f35a275820da7e83a35dface08281 upstream. cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Assisted-by: Codex:gpt-5.5 Signed-off-by: Zhang Cen Fixes: 3416eaa1f8f8 ("USB: cypress_m8: Packet format is separate from characteristic size") Cc: stable@vger.kernel.org # 2.6.26 [ johan: use constants in header length sanity checks ] Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman