kernel/linux.git/drivers/usb/serial, branch v5.4.113

USB: serial: cp210x: add some more GE USB IDs

2021-03-17T16:03:51+00:00

commit 42213a0190b535093a604945db05a4225bf43885 upstream. GE CS1000 has some more custom USB IDs for CP2102N; add them to the driver to have working auto-probing. Signed-off-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add ID for Acuity Brands nLight Air Adapter

2021-03-17T16:03:51+00:00

commit ca667a33207daeaf9c62b106815728718def60ec upstream. IDs of nLight Air Adapter, Acuity Brands, Inc.: vid: 10c4 pid: 88d8 Signed-off-by: Karan Singhal Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: ch341: add new Product ID

2021-03-17T16:03:51+00:00

commit 5563b3b6420362c8a1f468ca04afe6d5f0a8d0a3 upstream. Add PID for CH340 that's found on cheap programmers. The driver works flawlessly as soon as the new PID (0x9986) is added to it. These look like ANU232MI but ship with a ch341 inside. They have no special identifiers (mine only has the string "DB9D20130716" printed on the PCB and nothing identifiable on the packaging. The merchant i bought it from doesn't sell these anymore). the lsusb -v output is: Bus 001 Device 009: ID 9986:7523 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x9986 idProduct 0x7523 bcdDevice 2.54 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0027 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Signed-off-by: Niv Sardi Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_edgeport: fix memory leak in edge_startup

2021-03-17T16:03:50+00:00

commit cfdc67acc785e01a8719eeb7012709d245564701 upstream. sysbot found memory leak in edge_startup(). The problem was that when an error was received from the usb_submit_urb(), nothing was cleaned up. Reported-by: syzbot+59f777bdcbdd7eea5305@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver") Cc: stable@vger.kernel.org # 2.6.21: c5c0c55598ce Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mos7720: fix error code in mos7720_write()

2021-03-04T09:26:42+00:00

commit fea7372cbc40869876df0f045e367f6f97a1666c upstream. This code should return -ENOMEM if the kmalloc() fails but instead it returns success. Signed-off-by: Dan Carpenter Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mos7840: fix error code in mos7840_write()

2021-03-04T09:26:42+00:00

commit a70aa7dc60099bbdcbd6faca42a915d80f31161e upstream. This should return -ENOMEM instead of 0 if the kmalloc() fails. Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver") Signed-off-by: Dan Carpenter Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: fix FTX sub-integer prescaler

2021-03-04T09:26:42+00:00

commit 528222d0c8ce93e435a95cd1e476b60409dd5381 upstream. The most-significant bit of the sub-integer-prescaler index is set in the high byte of the baudrate request wIndex also for FTX devices. This fixes rates like 1152000 which got mapped to 1.2 MBd. Reported-by: Vladimir Link: https://bugzilla.kernel.org/show_bug.cgi?id=210351 Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: update interface mapping for ZTE P685M

2021-03-04T09:26:41+00:00

commit 6420a569504e212d618d4a4736e2c59ed80a8478 upstream. This patch prepares for qmi_wwan driver support for the device. Previously "option" driver mapped itself to interfaces 0 and 3 (matching ff/ff/ff), while interface 3 is in fact a QMI port. Interfaces 1 and 2 (matching ff/00/00) expose AT commands, and weren't supported previously at all. Without this patch, a possible conflict would exist if device ID was added to qmi_wwan driver for interface 3. Update and simplify device ID to match interfaces 0-2 directly, to expose QCDM (0), PCUI (1), and modem (2) ports and avoid conflict with QMI (3), and ADB (4). The modem is used inside ZTE MF283+ router and carriers identify it as such. Interface mapping is: 0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1275 Rev=f0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: Johan Hovold Cc: Bjørn Mork Signed-off-by: Lech Perczak Link: https://lore.kernel.org/r/20210207005443.12936-1-lech.perczak@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: Adding support for Cinterion MV31

2021-02-10T08:25:26+00:00

commit e478d6029dca9d8462f426aee0d32896ef64f10f upstream. Adding support for Cinterion device MV31 for enumeration with PID 0x00B3 and 0x00B7. usb-devices output for 0x00B3 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b3 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=cdc_wdm I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option usb-devices output for 0x00B7 T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b7 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00B3 USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Christoph Schemmel Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000

2021-02-10T08:25:26+00:00

commit 43377df70480f82919032eb09832e9646a8a5efb upstream. Teraoka AD2000 uses the CP210x driver, but the chip VID/PID is customized with 0988/0578. We need the driver to support the new VID/PID. Signed-off-by: Chenxin Jin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman