Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v5.10.78 2021-10-20T09:45:01+00:00 2021-10-20T09:45:01+00:00 Tomaz Solc tomaz.solc@tablix.org 2021-10-06T12:57:50+00:00 urn:sha1:3f0ca245a834119536e0d054ae3b5f85cb12628b commit c184accc4a42c7872dc8e8d0fc97a740dc61fe24 upstream. Adding support for Quectel EG91 LTE module. The interface layout is same as for EG95. usb-devices output: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0191 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan Interfaces: 0: Diag 1: GNSS 2: AT-command interface/modem 3: Modem 4: QMI Signed-off-by: Tomaz Solc <tomaz.solc@tablix.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-10-20T09:45:00+00:00 Daniele Palmas dnlplm@gmail.com 2021-10-04T10:56:55+00:00 urn:sha1:ecad614b0c6885761d0decdc1291749a0876dd4f commit f5a8a07edafed8bede17a95ef8940fe3a57a77d5 upstream. Add the following Telit LE910Cx composition: 0x1204: tty, adb, mbim, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211004105655.8515-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-10-20T09:45:00+00:00 Yu-Tung Chang mtwget@gmail.com 2021-09-30T02:11:12+00:00 urn:sha1:bf26bc72dc5927b28480f0983c447f789eb89ef7 commit 2263eb7370060bdb0013bc14e1a7c9bf33617a55 upstream. Add usb product id of the Quectel EC200S-CN module. usb-devices output for 0x6002: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6002 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Signed-off-by: Yu-Tung Chang <mtwget@gmail.com> Link: https://lore.kernel.org/r/20210930021112.330396-1-mtwget@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-10-20T09:45:00+00:00 Aleksander Morgado aleksander@aleksander.es 2021-10-07T12:25:01+00:00 urn:sha1:d4b77900cffe7ccaefcf7fa3a3a5b06a882b282c commit 11c52d250b34a0862edc29db03fbec23b30db6da upstream. When the module boots into QDL download mode it exposes the 1199:90d2 ids, which can be mapped to the qcserial driver, and used to run firmware upgrades (e.g. with the qmi-firmware-update program). T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=90d2 Rev=00.00 S: Manufacturer=Sierra Wireless, Incorporated S: Product=Sierra Wireless EM9191 S: SerialNumber=8W0382004102A109 C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-09-30T08:11:08+00:00 Johan Hovold johan@kernel.org 2021-09-22T11:30:59+00:00 urn:sha1:8373d58c89be9406f64f8facb311ab10b97cd026 commit c32dfec6c1c36bbbcd5d33e949d99aeb215877ec upstream. Some CP2102 do not support event-insertion mode but return no error when attempting to enable it. This means that any event escape characters in the input stream will not be escaped by the device and consequently regular data may be interpreted as escape sequences and be removed from the stream by the driver. The reporter's device has batch number DCL00X etched into it and as discovered by the SHA2017 Badge team, counterfeit devices with that marking can be detected by sending malformed vendor requests. [1][2] Tests confirm that the possibly counterfeit CP2102 returns a single byte in response to a malformed two-byte part-number request, while an original CP2102 returns two bytes. Assume that every CP2102 that behaves this way also does not support event-insertion mode (e.g. cannot report parity errors). [1] https://mobile.twitter.com/sha2017badge/status/1167902087289532418 [2] https://hackaday.com/2017/08/14/hands-on-with-the-shacamp-2017-badge/#comment-3903376 Reported-by: Malte Di Donato <malte@neo-soft.org> Tested-by: Malte Di Donato <malte@neo-soft.org> Fixes: a7207e9835a4 ("USB: serial: cp210x: add support for line-status events") Cc: stable@vger.kernel.org # 5.9 Link: https://lore.kernel.org/r/20210922113100.20888-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-09-30T08:11:00+00:00 Slark Xiao slark_xiao@163.com 2021-09-17T11:01:06+00:00 urn:sha1:2c28bb016bed842de16a8730bf96a7fe92e2a18f commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream. Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-09-30T08:11:00+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-09-17T09:18:48+00:00 urn:sha1:600b19610ad4b68de457e4c55ca709cc7b6afc8a commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream. The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-09-30T08:11:00+00:00 Carlo Lobrano c.lobrano@gmail.com 2021-09-03T12:39:13+00:00 urn:sha1:0daf57973ff0a1232197bca0487997774a376216 commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream. This patch adds the following Telit LN920 compositions: 0x1060: tty, adb, rmnet, tty, tty, tty, tty 0x1061: tty, adb, mbim, tty, tty, tty, tty 0x1062: rndis, tty, adb, tty, tty, tty, tty 0x1063: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com> Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com Reviewed-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-09-30T08:11:00+00:00 Krzysztof Kozlowski krzysztof.kozlowski@canonical.com 2021-09-17T09:18:47+00:00 urn:sha1:dc131d3f133510e56b8b73f7038fb9b091b71d25 commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream. 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-09-30T08:10:59+00:00 Uwe Brandt uwe.brandt@gmail.com 2021-09-21T17:54:46+00:00 urn:sha1:0809b8576fa860b0f168305f46aa08382eab8ec9 commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream. Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt <uwe.brandt@gmail.com> Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>