kernel/linux.git/drivers/usb/serial, branch v3.0.35

USB: serial: ti_usb_3410_5052: Add support for the FRI2 serial console

2012-06-01T07:12:58+00:00

commit 975dc33b82cb887d75a29b1e3835c8eb063a8e99 upstream. The Kontron M2M development board, also known as the Fish River Island II, has an optional daughter card providing access to the PCH_UART (EG20T) via a ti_usb_3410_5052 uart to usb chip. http://us.kontron.com/products/systems+and+platforms/m2m/m2m+smart+services+developer+kit.html Signed-off-by: Darren Hart CC: Al Borchers CC: Peter Berger Signed-off-by: Greg Kroah-Hartman

USB: ftdi-sio: add support for Physik Instrumente E-861

2012-06-01T07:12:56+00:00

commit b69cc672052540e8efb1368420f10d7d4d8b8a3d upstream. This adds VID/PID for the PI E-861. Without it, I had to do: modprobe -q ftdi-sio product=0x1008 vendor=0x1a72 http://www.physikinstrumente.com/en/products/prdetail.php?sortnr=900610 Signed-off-by: Éric Piel Signed-off-by: Greg Kroah-Hartman

USB: sierra: avoid QMI/wwan interface on MC77xx

2012-04-27T16:51:07+00:00

commit 749541d19e70905e3971f2a08335a206a98e4d0c upstream. These devices have a number of non serial interfaces as well. Use the existing "Direct IP" blacklist to prevent binding to interfaces which are handled by other drivers. We also extend the "Direct IP" blacklist with with interfaces only seen in "QMI" mode, assuming that these devices use the same interface numbers for serial interfaces both in "Direct IP" and in "QMI" mode. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

USB: serial: cp210x: Fixed usb_control_msg timeout values

2012-04-27T16:51:07+00:00

commit 2d5733fcd33dd451022d197cb6b476e970519ca7 upstream. Fixed too small hardcoded timeout values for usb_control_msg in driver for SiliconLabs cp210x-based usb-to-serial adapters. Replaced with USB_CTRL_GET_TIMEOUT/USB_CTRL_SET_TIMEOUT. Signed-off-by: Yuri Matylitski Acked-by: Kirill A. Shutemov Signed-off-by: Greg Kroah-Hartman

USB: sierra: add support for Sierra Wireless MC7710

2012-04-22T23:21:37+00:00

commit c5d703dcc776cb542b41665f2b7e2ba054efb4a7 upstream. Just add new device id. 3G works fine, LTE not tested. Signed-off-by: Anton Samokhvalov Signed-off-by: Greg Kroah-Hartman

USB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array

2012-04-22T23:21:33+00:00

commit 9ac2feb22b5b821d81463bef92698ef7682a3145 upstream. Re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Signed-off-by: Santiago Garcia Mantinan Signed-off-by: Greg Kroah-Hartman

USB: pl2303: fix DTR/RTS being raised on baud rate change

2012-04-22T23:21:26+00:00

commit ce5c9851855bab190c9a142761d54ba583ab094c upstream. DTR/RTS should only be raised when changing baudrate from B0 and not on any baud rate change (> B0). Reported-by: Søren Holm Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: fix race between probe and open

2012-04-22T23:21:25+00:00

commit a65a6f14dc24a90bde3f5d0073ba2364476200bf upstream. Fix race between probe and open by making sure that the disconnected flag is not cleared until all ports have been registered. A call to tty_open while probe is running may get a reference to the serial structure in serial_install before its ports have been registered. This may lead to usb_serial_core calling driver open before port is fully initialised. With ftdi_sio this result in the following NULL-pointer dereference as the private data has not been initialised at open: [ 199.698286] IP: [] ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698297] *pde = 00000000 [ 199.698303] Oops: 0000 [#1] PREEMPT SMP [ 199.698313] Modules linked in: ftdi_sio usbserial [ 199.698323] [ 199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J [ 199.698339] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [ 199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600 [ 199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc [ 199.698356] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000) [ 199.698364] Stack: [ 199.698368] f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800 [ 199.698387] 00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222 [ 199.698479] 22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab [ 199.698496] Call Trace: [ 199.698504] [] ? serial_activate+0x2e/0x70 [usbserial] [ 199.698511] [] serial_activate+0x4b/0x70 [usbserial] [ 199.698521] [] tty_port_open+0x7c/0xd0 [ 199.698527] [] ? serial_set_termios+0xa0/0xa0 [usbserial] [ 199.698534] [] serial_open+0x2f/0x70 [usbserial] [ 199.698540] [] tty_open+0x20c/0x510 [ 199.698546] [] chrdev_open+0xe7/0x230 [ 199.698553] [] __dentry_open+0x1f2/0x390 [ 199.698559] [] ? _raw_spin_unlock+0x2c/0x50 [ 199.698565] [] nameidata_to_filp+0x66/0x80 [ 199.698570] [] ? cdev_put+0x20/0x20 [ 199.698576] [] do_last+0x198/0x730 [ 199.698581] [] path_openat+0xa0/0x350 [ 199.698587] [] do_filp_open+0x35/0x80 [ 199.698593] [] ? _raw_spin_unlock+0x2c/0x50 [ 199.698599] [] ? alloc_fd+0xc0/0x100 [ 199.698605] [] ? getname_flags+0x72/0x120 [ 199.698611] [] do_sys_open+0xf0/0x1c0 [ 199.698617] [] ? trace_hardirqs_on_thunk+0xc/0x10 [ 199.698623] [] sys_open+0x2e/0x40 [ 199.698628] [] sysenter_do_call+0x12/0x36 [ 199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24 [ 199.698884] EIP: [] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc [ 199.698893] CR2: 0000000000000078 [ 199.698925] ---[ end trace 77c43ec023940cff ]--- Reported-and-tested-by: Ken Huang Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: mos7840: Fixed MCS7820 device attach problem

2012-04-02T16:27:08+00:00

commit 093ea2d3a766cb8a4c4de57efec6c0a127a58792 upstream. A MCS7820 device supports two serial ports and a MCS7840 device supports four serial ports. Both devices use the same driver, but the attach function in driver was unable to correctly handle the port numbers for MCS7820 device. This problem has been fixed in this patch and this fix has been verified on x86 Linux kernel 3.2.9 with both MCS7820 and MCS7840 devices. Signed-off-by: Donald Lee Signed-off-by: Greg Kroah-Hartman

usb: cp210x: Update to support CP2105 and multiple interface devices

2012-04-02T16:27:08+00:00

commit a5360a53a7ccad5ed9ccef210b94fef13c6e5529 upstream. This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick Signed-off-by: Greg Kroah-Hartman