kernel/linux.git/drivers/usb/serial, branch linux-2.6.18.y

usbserial: Reference leak

2006-09-12T10:10:20+00:00

A sufficiently-large number of USB serial devices causes a reference leak when /proc/tty/drivers/usbserial is read. Signed-Off-By: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman

USB: New device ID for ftdi_sio usb serial driver

2006-09-07T22:23:04+00:00

The patch adds a new device ID for the Gamma Scout Geiger counter device. Signed-off-by: Ralf Schlatterbeck Signed-off-by: Greg Kroah-Hartman

[PATCH] USB: pl2303: removed support for OTi's DKU-5 clone cable

2006-08-26T20:06:17+00:00

This patch removes support for a clone of Nokia DKU-5 cable made by Ours Technology Inc, as it turned out that the cable does not use the pl2303 chip, but OTI-6858 chip which is not compatible with the pl2303. Signed-off-by: Tomasz Kazmierczak Signed-off-by: Greg Kroah-Hartman

USB: ftdi_sio driver - new PIDs

2006-08-11T21:06:06+00:00

Signed-off-by: Jonathan Davies Signed-off-by: Greg Kroah-Hartman

USB: Additional PID for SHARP W-ZERO3

2006-08-11T21:06:06+00:00

I write a patch for ipaq.c. Would you like to add upstream tree ? This patch enables a support of "SHARP W-ZERO3(WS004SH)" and "SHARP W-ZERO3[es](WS007SH)". From: Norihiko Tomiyama Signed-off-by: Greg Kroah-Hartman

USB: New USB ID for Belkin Serial Adapter

2006-08-02T23:41:41+00:00

Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257) to the pl2303 driver in the Linux Kernel? Are you the appropriate person to approach for this? I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found that it didn't work. After a bit of experimentation I found that it works with the pl2303 driver once the ID has been added. See attached patch to fix this. Also attached is the output from lsusb -v just in case you require any information from there. From: Kim Oldfield Signed-off-by: Greg Kroah-Hartman

USB: Additional PID for the ftdi_sio driver

2006-08-02T23:41:41+00:00

Here's a short patch which adds one PID to the set of devices supported by the ftdi_sio driver. The device in question is a DLP module used as part of a ham radio USB-to-packet adapter. From: Dave Platt Signed-off-by: Greg Kroah-Hartman

USB: adding support for SHARP WS003SH to ipaq.c

2006-08-02T23:41:41+00:00

This small patch enables a support of "SHARP WS003SH". "SHARP WS003SH" (usullary called "W-ZERO3") is most polular All-in-one handheld CellPhone-plus-WindowsMobile5.0 in Japan. "SHARP WS003SH" has two modes, "Modem" and "ActiveSync". But, "ActiveSync" mode uses NDIS connection. Therefore, ipaq.c can only support "Modem" mode. http://www.sharp.co.jp/ws/ (Japanese Site) http://greggman.com/edit/editheadlines/2005-12-24.htm From: Norihiko Tomiyama Signed-off-by: Greg Kroah-Hartman

USB: Removed 3-port device handler from Option driver

2006-08-02T23:41:41+00:00

Dead code. From: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman

USB: Drop Sierra Wireless MC8755 from the Option driver

2006-08-02T23:41:41+00:00

This device is now supported by sierra.c. From: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman