kernel/linux.git/drivers/usb/serial/keyspan.c, branch v6.6.132

USB: serial: return errors from break handling

2023-06-07T15:00:23+00:00

Start propagating errors to user space when setting the break state fails. This will be used by follow-on changes to also report when a driver or device does not support break control. Tested-by: Corey Minyard Signed-off-by: Johan Hovold

usb: serial: Make ->set_termios() old ktermios const

2022-08-30T12:22:35+00:00

There should be no reason to adjust old ktermios which is going to get discarded anyway. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220816115739.10928-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: serial: keyspan: fix memleak on probe errors

2021-10-27T13:18:59+00:00

I got memory leak as follows when doing fault injection test: unreferenced object 0xffff888258228440 (size 64): comm "kworker/7:2", pid 2005, jiffies 4294989509 (age 824.540s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] slab_post_alloc_hook+0x9c/0x490 [] kmem_cache_alloc_trace+0x1f7/0x470 [] keyspan_port_probe+0xa4/0x5d0 [keyspan] [] usb_serial_device_probe+0x97/0x1d0 [usbserial] [] really_probe+0x167/0x460 [] __driver_probe_device+0xf9/0x180 [] driver_probe_device+0x53/0x130 [] __device_attach_driver+0x105/0x130 [] bus_for_each_drv+0x129/0x190 [] __device_attach+0x1c9/0x270 [] device_initial_probe+0x20/0x30 [] bus_probe_device+0x142/0x160 [] device_add+0x829/0x1300 [] usb_serial_probe.cold+0xc9b/0x14ac [usbserial] [] usb_probe_interface+0x1aa/0x3c0 [usbcore] [] really_probe+0x167/0x460 If keyspan_port_probe() fails to allocate memory for an out_buffer[i] or in_buffer[i], the previously allocated memory for out_buffer or in_buffer needs to be freed on the error handling path, otherwise a memory leak will result. Fixes: bad41a5bf177 ("USB: keyspan: fix port DMA-buffer allocations") Reported-by: Hulk Robot Signed-off-by: Wang Hai Link: https://lore.kernel.org/r/20211015085543.1203011-1-wanghai38@huawei.com Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Johan Hovold

USB: serial: make usb_serial_driver::write_room return uint

2021-05-19T08:56:40+00:00

Line disciplines expect a positive value or zero returned from tty->ops->write_room (invoked by tty_write_room). Both of them are being updated to return an unsigned int. Switch also usb_serial_driver::write_room and all its users. Signed-off-by: Jiri Slaby [ johan: amend commit message, drop unrelated comment change ] Signed-off-by: Johan Hovold

USB: serial: keyspan: drop unneeded forward declarations

2021-03-15T08:29:47+00:00

Forward declarations make the code larger, harder to follow and rewrite. Harder as the declarations are often omitted from global changes. Remove forward declarations which are not really needed, i.e. when the definition of the function is before its first use. Signed-off-by: Jiri Slaby Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: make remove callback return void

2021-02-09T12:13:58+00:00

All usb_serial drivers return 0 in their remove callbacks and driver core ignores the value returned by usb_serial_device_remove(). So change the remove callback to return void and return 0 unconditionally in usb_serial_device_remove(). Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20210208143149.963644-2-uwe@kleine-koenig.org Signed-off-by: Johan Hovold

USB: serial: keyspan: handle unbound ports

2020-01-17T15:22:58+00:00

Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: keyspan: fix NULL-derefs on open() and write()

2019-10-04T08:57:19+00:00

Fix NULL-pointer dereferences on open() and write() which can be triggered by a malicious USB device. The current URB allocation helper would fail to initialise the newly allocated URB if the device has unexpected endpoint descriptors, something which could lead NULL-pointer dereferences in a number of open() and write() paths when accessing the URB. For example: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:usb_clear_halt+0x11/0xc0 ... Call Trace: ? tty_port_open+0x4d/0xd0 keyspan_open+0x70/0x160 [keyspan] serial_port_activate+0x5b/0x80 [usbserial] tty_port_open+0x7b/0xd0 ? check_tty_count+0x43/0xa0 tty_open+0xf1/0x490 BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:keyspan_write+0x14e/0x1f3 [keyspan] ... Call Trace: serial_write+0x43/0xa0 [usbserial] n_tty_write+0x1af/0x4f0 ? do_wait_intr_irq+0x80/0x80 ? process_echoes+0x60/0x60 tty_write+0x13f/0x2f0 BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:keyspan_usa26_send_setup+0x298/0x305 [keyspan] ... Call Trace: keyspan_open+0x10f/0x160 [keyspan] serial_port_activate+0x5b/0x80 [usbserial] tty_port_open+0x7b/0xd0 ? check_tty_count+0x43/0xa0 tty_open+0xf1/0x490 Fixes: fdcba53e2d58 ("fix for bugzilla #7544 (keyspan USB-to-serial converter)") Cc: stable # 2.6.21 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold

USB: serial: Remove redundant license text

2017-11-04T10:55:38+00:00

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Signed-off-by: Greg Kroah-Hartman Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman