kernel/linux.git/drivers/usb/musb, branch v6.12.80

usb: musb: omap2430: fix device leak at unbind

2025-08-28T14:30:54+00:00

commit 1473e9e7679bd4f5a62d1abccae894fb86de280f upstream. Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 8934d3e4d0e7 ("usb: musb: omap2430: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20250724091910.21092-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: musb: fix gadget state on disconnect

2025-07-24T06:56:20+00:00

commit 67a59f82196c8c4f50c83329f0577acfb1349b50 upstream. When unplugging the USB cable or disconnecting a gadget in usb peripheral mode with echo "" > /sys/kernel/config/usb_gadget//UDC, /sys/class/udc/musb-hdrc.0/state does not change from USB_STATE_CONFIGURED. Testing on dwc2/3 shows they both update the state to USB_STATE_NOTATTACHED. Add calls to usb_gadget_set_state in musb_g_disconnect and musb_gadget_stop to fix both cases. Fixes: 49401f4169c0 ("usb: gadget: introduce gadget state tracking") Cc: stable@vger.kernel.org Co-authored-by: Yehowshua Immanuel Signed-off-by: Yehowshua Immanuel Signed-off-by: Drew Hamilton Link: https://lore.kernel.org/r/20250701154126.8543-1-drew.hamilton@zetier.com Signed-off-by: Greg Kroah-Hartman

usb: musb: Fix hardware lockup on first Rx endpoint request

2024-12-05T13:03:00+00:00

commit 3fc137386c4620305bbc2a216868c53f9245670a upstream. There is a possibility that a request's callback could be invoked from usb_ep_queue() (call trace below, supplemented with missing calls): req->complete from usb_gadget_giveback_request (drivers/usb/gadget/udc/core.c:999) usb_gadget_giveback_request from musb_g_giveback (drivers/usb/musb/musb_gadget.c:147) musb_g_giveback from rxstate (drivers/usb/musb/musb_gadget.c:784) rxstate from musb_ep_restart (drivers/usb/musb/musb_gadget.c:1169) musb_ep_restart from musb_ep_restart_resume_work (drivers/usb/musb/musb_gadget.c:1176) musb_ep_restart_resume_work from musb_queue_resume_work (drivers/usb/musb/musb_core.c:2279) musb_queue_resume_work from musb_gadget_queue (drivers/usb/musb/musb_gadget.c:1241) musb_gadget_queue from usb_ep_queue (drivers/usb/gadget/udc/core.c:300) According to the docstring of usb_ep_queue(), this should not happen: "Note that @req's ->complete() callback must never be called from within usb_ep_queue() as that can create deadlock situations." In fact, a hardware lockup might occur in the following sequence: 1. The gadget is initialized using musb_gadget_enable(). 2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an interrupt. 3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an empty queue (next_request() returns NULL). The interrupt flag has already been cleared by the glue layer handler, but the RXPKTRDY flag remains set. 4. The first request is enqueued using usb_ep_queue(), leading to the call of req->complete(), as shown in the call trace above. 5. If the callback enables IRQs and another packet is waiting, step (3) repeats. The request queue is empty because usb_g_giveback() removes the request before invoking the callback. 6. The endpoint remains locked up, as the interrupt triggered by hardware setting the RXPKTRDY flag has been handled, but the flag itself remains set. For this scenario to occur, it is only necessary for IRQs to be enabled at some point during the complete callback. This happens with the USB Ethernet gadget, whose rx_complete() callback calls netif_rx(). If called in the task context, netif_rx() disables the bottom halves (BHs). When the BHs are re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The gadget itself is initialized at module load (or at boot if built-in), but the first request is enqueued when the network interface is brought up, triggering rx_complete() in the task context via ioctl(). If a packet arrives while the interface is down, it can prevent the interface from receiving any further packets from the USB host. The situation is quite complicated with many parties involved. This particular issue can be resolved in several possible ways: 1. Ensure that callbacks never enable IRQs. This would be difficult to enforce, as discovering how netif_rx() interacts with interrupts was already quite challenging and u_ether is not the only function driver. Similar "bugs" could be hidden in other drivers as well. 2. Disable MUSB interrupts in musb_g_giveback() before calling the callback and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(), for example). This would ensure that MUSB interrupts are not handled during the callback, even if IRQs are enabled. In fact, it would allow IRQs to be enabled when releasing the lock. However, this feels like an inelegant hack. 3. Modify the interrupt handler to clear the RXPKTRDY flag if the request queue is empty. While this approach also feels like a hack, it wastes CPU time by attempting to handle incoming packets when the software is not ready to process them. 4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart(). This ensures that the hardware can receive packets when there is at least one request in the queue. Once IRQs are enabled, the interrupt handler will be able to correctly process the next incoming packet (eventually calling rxstate()). This approach may cause one or two packets to be dropped (two if double buffering is enabled), but this seems to be a minor issue, as packet loss can occur when the software is not yet ready to process them. Additionally, this solution makes the gadget driver compliant with the rule mentioned in the docstring of usb_ep_queue(). There may be additional solutions, but from these four, the last one has been chosen as it seems to be the most appropriate, as it addresses the "bad" behavior of the driver. Fixes: baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context.") Cc: stable@vger.kernel.org Signed-off-by: Hubert Wiśniewski Link: https://lore.kernel.org/r/4ee1ead4525f78fb5909a8cbf99513ad0082ad21.camel@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: musb: sunxi: Fix accessing an released usb phy

2024-11-05T12:31:16+00:00

Commit 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") will cause that usb phy @glue->xceiv is accessed after released. 1) register platform driver @sunxi_musb_driver // get the usb phy @glue->xceiv sunxi_musb_probe() -> devm_usb_get_phy(). 2) register and unregister platform driver @musb_driver musb_probe() -> sunxi_musb_init() use the phy here //the phy is released here musb_remove() -> sunxi_musb_exit() -> devm_usb_put_phy() 3) register @musb_driver again musb_probe() -> sunxi_musb_init() use the phy here but the phy has been released at 2). ... Fixed by reverting the commit, namely, removing devm_usb_put_phy() from sunxi_musb_exit(). Fixes: 6ed05c68cbca ("usb: musb: sunxi: Explicitly release USB PHY on exit") Cc: stable@vger.kernel.org Signed-off-by: Zijun Hu Link: https://lore.kernel.org/r/20241029-sunxi_fix-v1-1-9431ed2ab826@quicinc.com Signed-off-by: Greg Kroah-Hartman

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

usb: musb: mediatek: Simplify code with dev_err_probe()

2024-09-11T13:25:09+00:00

The combination of dev_err() and the returned error code could be replaced by dev_err_probe() in driver's probe function. Let's, converting to dev_err_probe() to make code more simple. Signed-off-by: Lin Ruifeng Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Matthias Brugger Link: https://lore.kernel.org/r/20240907081351.19879-1-linruifeng4@huawei.com Signed-off-by: Greg Kroah-Hartman

usb: musb: poll ID pin status in dual-role mode in mpfs glue layer

2024-08-13T08:37:18+00:00

Similar to other platforms using the MUSB driver, PolarFire SoC lacks an ID pin interrupt event, preventing several OTG-critical status change events from being exposed. We need to rely on polling to detect USB attach events for the dual-role port. The otg state machine implementation is based on Texas Instruments DA8xx/OMAP-L1x glue layer. This has been tested on BeagleV-Fire with couple of devices in host mode and with the Ethernet gadget driver in peripheral mode, in a wide variety of plug orders. Signed-off-by: Valentina Fernandez Link: https://lore.kernel.org/r/20240806131407.1542306-1-valentina.fernandezalanis@microchip.com Signed-off-by: Greg Kroah-Hartman

Merge 6.10-rc6 into usb-next

2024-07-01T11:59:29+00:00

We need the USB fixes in here as well for some follow-on patches. Signed-off-by: Greg Kroah-Hartman

usb: musb: da8xx: fix a resource leak in probe()

2024-06-20T17:36:15+00:00

Call usb_phy_generic_unregister() if of_platform_populate() fails. Fixes: d6299b6efbf6 ("usb: musb: Add support of CPPI 4.1 DMA controller to DA8xx") Cc: stable Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/69af1b1d-d3f4-492b-bcea-359ca5949f30@moroto.mountain Signed-off-by: Greg Kroah-Hartman

usb: musb: da8xx: Implement BABBLE recovery

2024-06-04T13:44:11+00:00

There is no specific behaviour implemented to recover from a babble error. When a BABBLE error happens, recovery fails as connected sticks are no longer detected by the USB controller. Implement the recover callback of the MUSB operation to reset the USB controller when a BABBLE happens. Signed-off-by: Bastien Curutchet Link: https://lore.kernel.org/r/20240528102026.40136-5-bastien.curutchet@bootlin.com Signed-off-by: Greg Kroah-Hartman