kernel/linux.git/drivers/usb/misc/Kconfig, branch v6.12.80

usb: misc: qcom_eud: Access EUD_MODE_MANAGER2 through secure calls

2025-10-15T10:00:05+00:00

[ Upstream commit c0485e864a2eaa1d5a84c71e573dd236d0e885ae ] EUD_MODE_MANAGER2 register is mapped to a memory region that is marked as read-only for operating system running at EL1, enforcing access restrictions that prohibit direct memory-mapped writes via writel(). Attempts to write to this region from HLOS can result in silent failures or memory access violations, particularly when toggling EUD (Embedded USB Debugger) state. To ensure secure register access, modify the driver to use qcom_scm_io_writel(), which routes the write operation to Qualcomm Secure Channel Monitor (SCM). SCM has the necessary permissions to access protected memory regions, enabling reliable control over EUD state. SC7280, the only user of EUD is also affected, indicating that this could never have worked on a properly fused device. Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Melody Olvera Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Reviewed-by: Souradeep Chowdhury Signed-off-by: Komal Bajaj Link: https://lore.kernel.org/r/20250731-eud_mode_manager_secure_access-v8-1-4a5dcbb79f41@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support

2024-10-04T13:36:51+00:00

Introduce new kernel config symbol for Microchip usb5744 SMBus programming support. Since usb5744 i2c initialization routine uses i2c SMBus APIs these APIs should only be invoked when kernel has I2C support. This new kernel config describes the dependency on I2C kernel support and fix the below build issues when USB_ONBOARD_DEV=y and CONFIG_I2C=m. riscv64-linux-ld: drivers/usb/misc/onboard_usb_dev.o: undefined reference to `i2c_find_device_by_fwnode' drivers/usb/misc/onboard_usb_dev.c:408:(.text+0xb24): undefined reference to `i2c_smbus_write_block_data' Parsing of the i2c-bus bus handle is not put under usb5744 kernel config check as the intention is to report an error when DT is configured for usb5744 SMBus support and kernel has USB_ONBOARD_DEV_USB5744 disabled. Fixes: 6782311d04df ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support") Signed-off-by: Radhey Shyam Pandey Suggested-by: Matthias Kaehlcke Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202409140539.3Axwv38m-lkp@intel.com/ Acked-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1727529992-476088-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_hub: rename to onboard_dev

2024-03-27T06:57:16+00:00

This patch prepares onboad_hub to support non-hub devices by renaming the driver files and their content, the headers and their references. The comments and descriptions have been slightly modified to keep coherence and account for the specific cases that only affect onboard hubs (e.g. peer-hub). The "hub" variables in functions where "dev" (and similar names) variables already exist have been renamed to onboard_dev for clarity, which adds a few lines in cases where more than 80 characters are used. No new functionality has been added. Acked-by: Matthias Kaehlcke Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20240325-onboard_xvf3500-v8-2-29e3f9222922@wolfvision.net Signed-off-by: Greg Kroah-Hartman

usb: Add support for Intel LJCA device

2023-10-11T09:33:37+00:00

Implements the USB part of Intel USB-I2C/GPIO/SPI adapter device named "La Jolla Cove Adapter" (LJCA). The communication between the various LJCA module drivers and the hardware will be muxed/demuxed by this driver. Three modules ( I2C, GPIO, and SPI) are supported currently. Each sub-module of LJCA device is identified by type field within the LJCA message header. The sub-modules of LJCA can use ljca_transfer() to issue a transfer between host and hardware. And ljca_register_event_cb is exported to LJCA sub-module drivers for hardware event subscription. The minimum code in ASL that covers this board is Scope (\_SB.PCI0.DWC3.RHUB.HS01) { Device (GPIO) { Name (_ADR, Zero) Name (_STA, 0x0F) } Device (I2C) { Name (_ADR, One) Name (_STA, 0x0F) } Device (SPI) { Name (_ADR, 0x02) Name (_STA, 0x0F) } } Signed-off-by: Wentong Wu Reviewed-by: Sakari Ailus Reviewed-by: Andi Shyti Tested-by: Hans de Goede Reviewed-by: Oliver Neukum Link: https://lore.kernel.org/r/1696833205-16716-2-git-send-email-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman

usb: move config USB_USS720 to usb's misc Kconfig

2023-03-29T08:34:08+00:00

The USS720 parport driver source code is in drivers/usb/misc/, the corresponding config is defined in drivers/usb/Kconfig. Some digging in the kernel's history revealed no good reason why it needs to be defined in USB's top-level Kconfig file, and why the config for the USS720 parport driver should be the first in the list of USB port drivers, while all other configs for drivers in drivers/usb/misc are in the USB Miscellaneous driver configuration file. Most probably, it was simply considered a bit more special when the USB Miscellaneous driver configuration file (drivers/usb/misc/Config.in back then) was initially created, and this config simply survived to remain at the top-level USB Kconfig file with all further code/Kconfig transformations and additions later on. Users rarely notice this config being at this position, as CONFIG_PARPORT (Parallel port support) needs to be enabled and only few users enable that. Nowadays, this USB_USS720 driver is probably not that special that it needs to be listed as first item of the USB port drivers. Move the configuration of the USS720 parport driver to the top of the USB Miscellaneous drivers section, as the configurations does not have a lot of specific ordering USB Miscellaneous drivers. This way, the USS720 parport driver is moved to the comment "USB Miscellaneous drivers", fitting to the driver's source code location, but still is at the top of the list for those few acquainted users of Kconfig UIs that might be looking for the config that was once at the top of the list of the USB port drivers. Put this config definition to a more local place. No semantic change. Signed-off-by: Lukas Bulwahn Link: https://lore.kernel.org/r/20230329075125.32352-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: ftdi-elan: Delete driver

2023-03-21T15:31:59+00:00

This driver didn't see real maintainance since several years. It has several trivial issues (check $(scripts/checkpatch.pl -f drivers/usb/misc/ftdi-elan.c)) and some harder ones (difficult locking, explict kref handling, ...). Also today it's hard to find hardware to make actually use of such a card and I suspect the driver is completely unused. So remove it. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230321150919.351947-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: host: u132-hcd: Delete driver

2023-03-21T13:06:11+00:00

This driver got its last actual change in 2006 and is probably unused as nowbody should use a cardbus to USB adapter any more. If it were still used, the driver was in urgent need for maintainer love. (Explicit kref handling, underdocumented locking, .remove() can return errors ...) Also the link in the (now removed) help text doesn't look actively maintained. According to archive.org it forwarded to http://www.copenhagen-hotel.net/ already back in 2018. So don't waste more time on this driver and just delete it. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230321103638.343886-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: misc: onboard_usb_hub: Drop obsolete dependency on COMPILE_TEST

2022-11-29T07:56:09+00:00

Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Cc: Matthias Kaehlcke Cc: Greg Kroah-Hartman Signed-off-by: Jean Delvare Link: https://lore.kernel.org/r/20221127155230.144886b7@endymion.delvare Signed-off-by: Greg Kroah-Hartman

usb: misc: Add onboard_usb_hub driver

2022-07-08T12:53:50+00:00

The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Co-developed-by: Ravi Chandra Sadineni Reviewed-by: Douglas Anderson Signed-off-by: Ravi Chandra Sadineni Signed-off-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid Signed-off-by: Greg Kroah-Hartman

usb: misc: USB_QCOM_EUD should depend on ARCH_QCOM

2022-02-24T10:19:55+00:00

The Qualcomm Embedded USB Debugger is not a pluggable USB device, and can only be present on Qualcomm SoCs. Hence add a dependency on ARCH_QCOM, to prevent asking the user about this driver when configuring a kernel without Qualcomm SoC support. Fixes: 9a1bf58ccd443268 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/f3ba3ea0d7f5e628c71cb7a9d62c9fb4589297b1.1645630266.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman