kernel/linux.git/drivers/usb/misc/Kconfig, branch v6.1.168

usb: misc: Add onboard_usb_hub driver

2022-07-08T12:53:50+00:00

The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Co-developed-by: Ravi Chandra Sadineni Reviewed-by: Douglas Anderson Signed-off-by: Ravi Chandra Sadineni Signed-off-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid Signed-off-by: Greg Kroah-Hartman

usb: misc: USB_QCOM_EUD should depend on ARCH_QCOM

2022-02-24T10:19:55+00:00

The Qualcomm Embedded USB Debugger is not a pluggable USB device, and can only be present on Qualcomm SoCs. Hence add a dependency on ARCH_QCOM, to prevent asking the user about this driver when configuring a kernel without Qualcomm SoC support. Fixes: 9a1bf58ccd443268 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/f3ba3ea0d7f5e628c71cb7a9d62c9fb4589297b1.1645630266.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)

2022-02-11T11:01:02+00:00

Add support for control peripheral of EUD (Embedded USB Debugger) to listen to events such as USB attach/detach, pet EUD to indicate software is functional.Reusing the platform device kobj, sysfs entry 'enable' is created to enable or disable EUD. To enable the eud the following needs to be done echo 1 > /sys/bus/platform/.../enable To disable eud, following is the command echo 0 > /sys/bus/platform/.../enable Signed-off-by: Souradeep Chowdhury Link: https://lore.kernel.org/r/0ac5c2b2c8e4ce4f4f342a08b48cfc61aeaf7ee8.1644339918.git.quic_schowdhu@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: Add driver to allow any GPIO to be used for 7211 USB signals

2020-10-28T11:24:15+00:00

The Broadcom 7211 has new functionality that allows some USB low speed side band signals, that go from the XHCI host controller to pins on the chip, to be remapped to use any GPIO pin instead of the limited set selectable by hardware. This can be done without changing the standard driver for the host controller. There is currently support for three USB signals, PWRON, VBUS_PRESENT and PWRFLT. This driver will allow the remapping of any of these three signals based on settings in the Device Tree node for the driver. The driver was written so that it could handle additional signals added in the future by just adding the correct properties to the DT node. Below is an example of a DT node that would remap all three signals: usb_pinmap: usb-pinmap@22000d0 { compatible = "brcm,usb-pinmap"; reg = <0x22000d0 0x4>; in-gpios = <&gpio 18 0>, <&gpio 19 0>; brcm,in-functions = "VBUS", "PWRFLT"; brcm,in-masks = <0x8000 0x40000 0x10000 0x80000>; out-gpios = <&gpio 20 0>; brcm,out-functions = "PWRON"; brcm,out-masks = <0x20000 0x800000 0x400000 0x200000>; interrupts = <0x0 0xb2 0x4>; }; Signed-off-by: Al Cooper Link: https://lore.kernel.org/r/20201012200007.8862-3-alcooperx@gmail.com Signed-off-by: Greg Kroah-Hartman

USB: Replace HTTP links with HTTPS ones

2020-07-21T11:41:57+00:00

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Link: https://lore.kernel.org/r/20200719160910.60018-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada

USB: Add driver to control USB fast charge for iOS devices

2020-02-12T19:01:55+00:00

iOS devices will not draw more than 500mA unless instructed to do so. Setting the charge type power supply property to "fast" tells the device to start drawing more power, using the same procedure that official "MFi" chargers would. Signed-off-by: Bastien Nocera Acked-by: Alan Stern Link: https://lore.kernel.org/r/20191016093933.693-7-hadess@hadess.net Signed-off-by: Greg Kroah-Hartman

usb: misc: Fix Kconfig indentation

2019-11-21T13:39:40+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20191121132901.29186-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman

Merge 5.4-rc3 into usb-next

2019-10-14T05:09:59+00:00

we want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: Fix Kconfig indentation

2019-10-04T12:09:41+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski Acked-by: Johan Hovold Link: https://lore.kernel.org/r/20190923154956.6868-1-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman