kernel/linux.git/drivers/usb/isp1760, branch v4.14.286

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

usb: isp1760: compress return logic into one line

2017-07-17T11:13:44+00:00

Simplify return logic to avoid unnecessary variable assignment. This issue was detected using Coccinelle and the following semantic patch: @@ local idexpression ret; expression e; @@ -ret = +return e; -return ret; Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman

usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW

2017-03-17T04:16:56+00:00

a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: isp1760: constify usb_gadget_ops structures

2017-01-19T09:34:45+00:00

Declare usb_gadget_ops structures as const as they are only stored in the ops field of a usb_gadget structure. This field is of type const, so usb_gadget_ops structures having this property can be declared const too. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct usb_gadget_ops i@p={...}; @ok1@ identifier r1.i; position p; struct isp1760_udc udc; @@ udc.gadget.ops=&i@p @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct usb_gadget_ops i; File size before: drivers/usb/isp1760/isp1760-udc.o text data bss dec hex filename 12434 4136 16 16586 40ca usb/isp1760/isp1760-udc.o File size after: drivers/usb/isp1760/isp1760-udc.o text data bss dec hex filename 12530 4048 16 16594 40d2 usb/isp1760/isp1760-udc.o Signed-off-by: Bhumika Goyal Signed-off-by: Greg Kroah-Hartman

usb: Convert pr_warning to pr_warn

2016-10-24T12:36:25+00:00

Use the more common logging mechanism. Miscellanea: o Realign multiline statements o Coalesce format Signed-off-by: Joe Perches Acked-by: Nicolas Ferre Acked-by: Robert Jarzmik Signed-off-by: Greg Kroah-Hartman

usb: Remove unnecessary space before open square bracket.

2016-05-09T11:08:46+00:00

Remove unnecessary space before open square bracket. Signed-off-by: Sandhya Bankar Signed-off-by: Greg Kroah-Hartman

usb: isp1760: udc: add ep capabilities support

2015-08-04T17:26:55+00:00

Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga Signed-off-by: Felipe Balbi

usb: isp1760: udc: add missing usb_ep_set_maxpacket_limit()

2015-07-31T13:58:00+00:00

Since maxpacket_limit was introduced all UDC drivers should use usb_ep_set_maxpacket_limit() function instead of setting maxpacket value manually. ep.maxpacket_limit contains actual maximum maxpacket value supported by hardware which is needed by epautoconf. Signed-off-by: Robert Baldyga Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi

usb: isp1760: check for null return from kzalloc

2015-06-08T21:25:04+00:00

isp1760_ep_alloc_request allocates a structure with kzalloc without checking for NULL and then returns a pointer to one of the structure fields. As the field happens to be the first in the structure the caller can properly check for NULL, but this is risky if the structure layout is changed later. Add an explicit NULL check for the kzalloc return value Detected with smatch static analysis: drivers/usb/isp1760/isp1760-udc.c:816 isp1760_ep_alloc_request() error: potential null dereference 'req'. (kzalloc returns null) [ thanks to Laurent Pinchart for improved commit message ] Signed-off-by: Colin Ian King Acked-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v4.1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing

2015-04-10T11:45:27+00:00

Felipe writes: usb: generic resume timeout for v4.1 This part 2 pull request contains only the patches which make sure everybody on linux uses the same resume timeout value. Signed-off-by: Felipe Balbi