kernel/linux.git/drivers/usb/host, branch v5.9.12

xhci: hisilicon: fix refercence leak in xhci_histb_probe

2020-11-18T18:22:26+00:00

commit 76255470ffa2795a44032e8b3c1ced11d81aa2db upstream. pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. We should decrease the usage count whetever it succeeded or failed(maybe runtime of the device has error, or device is in inaccessible state, or other error state). If we do not call put operation to decrease the reference, it will result in reference leak in xhci_histb_probe. Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we fixed it by jumping to error handling branch. Fixes: c508f41da0788 ("xhci: hisilicon: support HiSilicon STB xHCI host controller") Signed-off-by: Zhang Qilong Link: https://lore.kernel.org/r/20201106122221.2304528-1-zhangqilong3@huawei.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: host: fsl-mph-dr-of: check return of dma_set_mask()

2020-11-05T10:51:39+00:00

commit 3cd54a618834430a26a648d880dd83d740f2ae30 upstream. fsl_usb2_device_register() should stop init if dma_set_mask() return error. Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device") Reviewed-by: Peter Chen Signed-off-by: Ran Wang Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC

2020-11-05T10:51:38+00:00

commit 2a632815683d2d34df52b701a36fe5ac6654e719 upstream. On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, need to disable a bit which is enable in sparse controller. Cc: stable@vger.kernel.org #v4.19+ Signed-off-by: Sanket Goswami Signed-off-by: Sandeep Singh Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: omit duplicate actions when suspending a runtime suspended host.

2020-11-05T10:51:22+00:00

[ Upstream commit 18a367e8947d72dd91b6fc401e88a2952c6363f7 ] If the xhci-plat.c is the platform driver, after the runtime pm is enabled, the xhci_suspend is called if nothing is connected on the port. When the system goes to suspend, it will call xhci_suspend again if USB wakeup is enabled. Since the runtime suspend wakeup setting is not always the same as system suspend wakeup setting, eg, at runtime suspend we always need wakeup if the controller is in low power mode; but at system suspend, we may not need wakeup. So, we move the judgement after changing wakeup setting. [commit message rewording -Mathias] Reviewed-by: Jun Li Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200918131752.16488-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()

2020-11-05T10:51:12+00:00

[ Upstream commit 32d174d2d5eb318c34ff36771adefabdf227c186 ] If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in tegra_ehci_probe(). Fixes: 79ad3b5add4a ("usb: host: Add EHCI driver for NVIDIA Tegra SoCs") Acked-by: Alan Stern Acked-by: Thierry Reding Signed-off-by: Tang Bin Link: https://lore.kernel.org/r/20201026090657.49988-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: ohci: Default to per-port over-current protection

2020-10-29T09:12:16+00:00

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ] Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired. Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub. We now alter the default to use per-port over-current protection. This patch results in the following configuration changes depending on quirks: - For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection. - For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Hamish Martin Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: don't create endpoint debugfs entry before ring buffer is set.

2020-10-29T09:11:23+00:00

[ Upstream commit 167657a1bb5fcde53ac304ce6c564bd90a2f9185 ] Make sure xHC completes the configure endpoint command and xhci driver sets the ring pointers correctly before we create the user readable debugfs file. In theory there was a small gap where a user could have read the debugfs file and cause a NULL pointer dereference error as ring pointer was not yet set, in practise we want this change to simplify the upcoming streams debugfs support. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200918131752.16488-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

ehci-hcd: Move include to keep CRC stable

2020-09-17T06:39:50+00:00

The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file. Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern: struct foo; int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar); /* This contains struct foo's definition */ #include "foo.h" int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz); Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz. The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming. In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled. Acked-by: Alan Stern Cc: stable Signed-off-by: Quentin Perret Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2020-08-30T17:51:03+00:00

Pull USB fixes from Greg KH: "Let's try this again... Here are some USB fixes for 5.9-rc3. This differs from the previous pull request for this release in that the usb gadget patch now does not break some systems, and actually does what it was intended to do. Many thanks to Marek Szyprowski for quickly noticing and testing the patch from Andy Shevchenko to resolve this issue. Additionally, some more new USB quirks have been added to get some new devices to work properly based on user reports. Other than that, the patches are all here, and they contain: - usb gadget driver fixes - xhci driver fixes - typec fixes - new quirks and ids - fixes for USB patches that went into 5.9-rc1. All of these have been tested in linux-next with no reported issues" * tag 'usb-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: storage: Add unusual_uas entry for Sony PSZ drives USB: Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe() USB: gadget: u_f: Unbreak offset calculation in VLAs USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-D usb: typec: tcpm: Fix Fix source hard reset response for TDA 2.3.1.1 and TDA 2.3.1.2 failures USB: PHY: JZ4770: Fix static checker warning. USB: gadget: f_ncm: add bounds checks to ncm_unwrap_ntb() USB: gadget: u_f: add overflow checks to VLA macros xhci: Always restore EP_SOFT_CLEAR_TOGGLE even if ep reset failed xhci: Do warm-reset when both CAS and XDEV_RESUME are set usb: host: xhci: fix ep context print mismatch in debugfs usb: uas: Add quirk for PNY Pro Elite tools: usb: move to tools buildsystem USB: Fix device driver race USB: Also match device drivers using the ->match vfunc usb: host: xhci-tegra: fix tegra_xusb_get_phy() usb: host: xhci-tegra: otg usb2/usb3 port init usb: hcd: Fix use after free in usb_hcd_pci_remove() usb: typec: ucsi: Hold con->lock for the entire duration of ucsi_register_port() ...

usb: host: ohci-exynos: Fix error handling in exynos_ohci_probe()

2020-08-27T07:25:58+00:00

If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244cf87 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by: Zhang Shengju Cc: stable Signed-off-by: Tang Bin Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman