kernel/linux.git/drivers/usb/host, branch v4.14.217

usb: ohci: Make distrust_firmware param default to false

2021-01-23T14:48:45+00:00

commit c4005a8f65edc55fb1700dfc5c1c3dc58be80209 upstream. The 'distrust_firmware' module parameter dates from 2004 and the USB subsystem is a lot more mature and reliable now than it was then. Alter the default to false now. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Hamish Martin Link: https://lore.kernel.org/r/20200910212512.16670-2-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman

USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set

2021-01-12T19:09:10+00:00

commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760 upstream. The commit 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") was constraining the xhci code not to allow U1/U2 sleep states if the latency to wake up from the U-states reached the service interval of an periodic endpoint. This fix was not taking into account that in case the quirk XHCI_INTEL_HOST is set, the wakeup time will be calculated and configured differently. It checks for u1_params.mel/u2_params.mel as a limit. But the code could decide to write another MEL into the hardware. This leads to broken cases where not enough bandwidth is available for other devices: usb 1-2: can't set config #1, error -28 This patch is fixing that case by checking for timeout_ns after the wakeup time was calculated depending on the quirks. Fixes: 0472bf06c6fd ("xhci: Prevent U1/U2 link pm states if exit latency is too long") Signed-off-by: Michael Grzeschik Cc: stable Link: https://lore.kernel.org/r/20201215193147.11738-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman

usb: oxu210hp-hcd: Fix memory leak in oxu_create

2020-12-29T12:47:00+00:00

[ Upstream commit e5548b05631ec3e6bfdaef1cad28c799545b791b ] usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when adding fails to prevent memory leak. Fixes: b92a78e582b1a ("usb host: Oxford OXU210HP HCD driver") Reported-by: Hulk Robot Signed-off-by: Zhang Qilong Link: https://lore.kernel.org/r/20201123145809.1456541-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: ehci-omap: Fix PM disable depth umbalance in ehci_hcd_omap_probe

2020-12-29T12:47:00+00:00

[ Upstream commit d6ff32478d7e95d6ca199b5c852710d6964d5811 ] The pm_runtime_enable will decrement the power disable depth. Imbalance depth will resulted in enabling runtime PM of device fails later. Thus a pairing decrement must be needed on the error handling path to keep it balanced. Fixes: 6c984b066d84b ("ARM: OMAP: USBHOST: Replace usbhs core driver APIs by Runtime pm APIs") Acked-by: Alan Stern Signed-off-by: Zhang Qilong Link: https://lore.kernel.org/r/20201123145719.1455849-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: Give USB2 ports time to enter U3 in bus suspend

2020-12-29T12:46:46+00:00

commit c1373f10479b624fb6dba0805d673e860f1b421d upstream. If a USB2 device wakeup is not enabled/supported the link state may still be in U0 in xhci_bus_suspend(), where it's then manually put to suspended U3 state. Just as with selective suspend the device needs time to enter U3 suspend before continuing with further suspend operations (e.g. system suspend), otherwise we may enter system suspend with link state in U0. [commit message rewording -Mathias] Cc: Signed-off-by: Li Jun Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20201208092912.1773650-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: host: fsl-mph-dr-of: check return of dma_set_mask()

2020-11-05T10:07:01+00:00

commit 3cd54a618834430a26a648d880dd83d740f2ae30 upstream. fsl_usb2_device_register() should stop init if dma_set_mask() return error. Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device") Reviewed-by: Peter Chen Signed-off-by: Ran Wang Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: ohci: Default to per-port over-current protection

2020-10-29T08:07:18+00:00

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ] Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired. Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub. We now alter the default to use per-port over-current protection. This patch results in the following configuration changes depending on quirks: - For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection. - For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Hamish Martin Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int

2020-10-01T11:12:44+00:00

[ Upstream commit a7f40c233a6b0540d28743267560df9cfb571ca9 ] The comparison of hcd->irq to less than zero for an error check will never be true because hcd->irq is an unsigned int. Fix this by assigning the int retval to the return of platform_get_irq and checking this for the -ve error condition and assigning hcd->irq to retval. Addresses-Coverity: ("Unsigned compared against 0") Fixes: c856b4b0fdb5 ("USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()") Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20200515165453.104028-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe()

2020-10-01T11:12:43+00:00

[ Upstream commit c856b4b0fdb5044bca4c0acf9a66f3b5cc01a37a ] If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in mv_ehci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Signed-off-by: Zhang Shengju Signed-off-by: Tang Bin Link: https://lore.kernel.org/r/20200508114305.15740-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

ehci-hcd: Move include to keep CRC stable

2020-09-23T08:46:36+00:00

commit 29231826f3bd65500118c473fccf31c0cf14dbc0 upstream. The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file. Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern: struct foo; int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar); /* This contains struct foo's definition */ #include "foo.h" int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz); Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz. The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming. In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled. Acked-by: Alan Stern Cc: stable Signed-off-by: Quentin Perret Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com Signed-off-by: Greg Kroah-Hartman