kernel/linux.git/drivers/usb/host, branch v2.6.28

USB: fix SB600 USB subsystem hang bug

2008-12-01T06:24:02+00:00

This patch is required for all AMD SB600 revisions to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. Reported in bugzilla as #11599, the similar patch for SB700 old revision is: commit b09bc6cbae4dd3a2d35722668ef2c502a7b8b093 Reported-by: raffaele Tested-by: Roman Mamedov Signed-off-by: Shane Huang Cc: stable Signed-off-by: Greg Kroah-Hartman

Revert "USB: improve ehci_watchdog's side effect in CPU power management"

2008-12-01T06:24:02+00:00

This reverts commit f0d781d59cb621e1795d510039df973d0f8b23fc. It was the wrong thing to do, and does not really do what it said it did. Cc: Yi Yang Cc: David Brownell Cc: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: fix SB700 usb subsystem hang bug

2008-11-20T06:01:34+00:00

This patch is required for AMD SB700 south bridge revision A12 and A13 to avoid USB subsystem hang symptom. The USB subsystem hang symptom is observed when the system has multiple USB devices connected to it. In some cases a USB hub may be required to observe this symptom. This patch works around the problem by correcting the internal register setting that will help by changing the behavior of the internal logic to avoid the USB subsystem hang issue. The change in the behavior of the logic does not impact the normal operation of the USB subsystem. Reported-by: Volker Armin Hemmann Tested-by: Volker Armin Hemmann Signed-off-by: Andiry Xu Signed-off-by: Libin Yang Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: EHCI: fix divide-by-zero bug

2008-11-13T22:45:06+00:00

This patch (as1164) fixes a bug in the EHCI scheduler. The interval value it uses is already in linear format, not logarithmically coded. The existing code can sometimes crash the system by trying to divide by zero. Signed-off-by: Alan Stern Cc: David Brownell Cc: Stable Signed-off-by: Greg Kroah-Hartman

USB: EHCI: fix handling of dead controllers

2008-11-13T22:45:05+00:00

This patch (as1165) makes a few small changes in the logic used by ehci-hcd when it encounters a controller error: Instead of printing out the masked status, it prints the original status as read directly from the hardware. It doesn't check for the STS_HALT status bit before taking action. The mere fact that the STS_FATAL bit is set means that something bad has happened and the controller needs to be reset. With the old code this test could never succeed because the STS_HALT bit was masked out from the status. I anticipate that this will prevent the occasional "irq X: nobody cared" problem people encounter when their EHCI controllers die. Signed-off-by: Alan Stern Cc: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: r8a66597-hcd: fix wrong data access in SuperH on-chip USB

2008-11-13T22:45:04+00:00

When I used SuperH on-chip USB, there was the problem that accessed r8a66597_root_hub which was not allocated. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman

USB: remove optional bus bindings in isp1760, fixing runtime warning

2008-11-13T22:45:03+00:00

Roland Reported the following: | kmem_cache_create: duplicate cache isp1760_qtd | Pid: 461, comm: modprobe Tainted: G W 2.6.28-rc2-git3-default #4 | Call Trace: | [] kmem_cache_create+0xc9/0x3a3 | [] free_pages_bulk+0x16c/0x1c9 | [] isp1760_init+0x0/0xb [isp1760] | [] init_kmem_once+0x18/0x5f [isp1760] | [] isp1760_init+0x5/0xb [isp1760] | [] _stext+0x4d/0x148 | [] load_module+0x12cd/0x142e | [] kmem_cache_destroy+0x0/0xd7 | [] sys_init_module+0x87/0x176 | [] sysenter_do_call+0x12/0x2f The reason, is that ret is initialized with ENODEV instead of 0 _or_ the kmem cache is not freed in error case with no bus binding. The difference between OF+PCI and OF only is | 15148 804 32 15984 3e70 isp1760-of-pci.o | 13748 676 8 14432 3860 isp1760-of.o about 1.5 KiB. Until there is a checkbox where the user *must* select atleast one item, and may select multiple entries I don't make it selectable anymore. Having a driver which can't be used under any circumstances is broken anyway and I've seen distros shipping it that way. Reported-by: Roland Kletzing Signed-off-by: Sebastian Andrzej Siewior a Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: Fix PS3 USB shutdown problems

2008-11-13T22:45:02+00:00

Add ehci_shutdown() or ohci_shutdown() calls to the USB PS3 bus glue. ehci_shutdown() and ohci_shutdown() do some controller specific cleanups not done by usb_remove_hcd(). Fixes errors on shutdown or reboot similar to these: ps3-ehci-driver sb_07: HC died; cleaning up irq 51: nobody cared (try booting with the "irqpoll" option) Related bugzilla reports: http://bugzilla.kernel.org/show_bug.cgi?id=11819 http://bugzilla.terrasoftsolutions.com/show_bug.cgi?id=317 Signed-off-by: Geoff Levand Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

2008-10-23T17:09:50+00:00

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: don't rebind drivers after failed resume or reset USB: fix memory leak in cdc-acm USB: Unusual dev for Mio moov 330 gps USB: cdc-wdm: make module autoload work USB: Fix unneeded endpoint check in pxa27x_udc usb/gadget: fix kernel-doc warning USB: Speedtouch: add pre_reset and post_reset routines USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative USB: support Huawei data card product IDs USB: add ZTE MF626 USB GSM modem entry USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc USB: ohci: add support for tmio-ohci cell

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb

2008-10-23T15:20:34+00:00

* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits) uwb: wrong sizeof argument in mac address compare uwb: don't use printk_ratelimit() so often uwb: use kcalloc where appropriate uwb: use time_after() when purging stale beacons uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems uwb: add entries in the MAINTAINERS file uwb: depend on EXPERIMENTAL wusb: wusb-cbaf (CBA driver) sysfs ABI simplification uwb: document UWB and WUSB sysfs files uwb: add symlinks in sysfs between radio controllers and PALs uwb: dont tranmit identification IEs uwb: i1480/GUWA100U: fix firmware download issues uwb: i1480: remove MAC/PHY information checking function uwb: add Intel i1480 HWA to the UWB RC quirk table uwb: disable command/event filtering for D-Link DUB-1210 uwb: initialize the debug sub-system uwb: Fix handling IEs with empty IE data in uwb_est_get_size() wusb: fix bmRequestType for Abort RPipe request wusb: fix error path for wusb_set_dev_addr() wusb: add HWA host controller driver ...