kernel/linux.git/drivers/usb/host, branch linux-6.0.y

xhci: Prevent infinite loop in transaction errors recovery for streams

2022-12-31T12:26:52+00:00

commit a1575120972ecd7baa6af6a69e4e7ea9213bde7c upstream. Make sure to also limit the amount of soft reset retries for transaction errors on streams in cases where the transaction error event doesn't point to any specific TRB. In these cases we don't know the TRB or stream ring, but we do know which endpoint had the error. To keep error counting simple and functional, move the current err_count from ring structure to endpoint structure. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221130091944.2171610-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-mtk: fix leakage of shared hcd when fail to set wakeup irq

2022-12-31T12:26:51+00:00

commit 03a88b0bafbe3f548729d970d8366f48718c9b19 upstream. Can not set the @shared_hcd to NULL before decrease the usage count by usb_put_hcd(), this will cause the shared hcd not released. Fixes: 04284eb74e0c ("usb: xhci-mtk: add support runtime PM") Cc: Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20221128063337.18124-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

xhci: Apply XHCI_RESET_TO_DEFAULT quirk to ADL-N

2022-12-21T16:41:14+00:00

commit fed70b61ef2c0aed54456db3d485b215f6cc3209 upstream. ADL-N systems have the same issue as ADL-P, where a large boot firmware delay is seen if USB ports are left in U3 at shutdown. So apply the XHCI_RESET_TO_DEFAULT quirk to ADL-N as well. This patch depends on commit 34cd2db408d5 ("xhci: Add quirk to reset host back to default state at shutdown"). The issue it fixes is a ~20s boot time delay when booting from S5. It affects ADL-N devices, and ADL-N support was added starting from v5.16. Cc: stable@vger.kernel.org Signed-off-by: Reka Norman Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221130091944.2171610-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: bcma: Make GPIO explicitly optional

2022-11-26T08:27:45+00:00

commit cd136706b4f925aa5d316642543babac90d45910 upstream. What the code does is to not check the return value from devm_gpiod_get() and then avoid using an erroneous GPIO descriptor with IS_ERR_OR_NULL(). This will miss real errors from the GPIO core that should not be ignored, such as probe deferral. Instead request the GPIO as explicitly optional, which means that if it doesn't exist, the descriptor returned will be NULL. Then we can add error handling and also avoid just doing this on the device tree path, and simplify the site where the optional GPIO descriptor is used. There were some problems with cleaning up this GPIO descriptor use in the past, but this is the proper way to deal with it. Cc: Rafał Miłecki Cc: Chuhong Yuan Signed-off-by: Linus Walleij Cc: stable Link: https://lore.kernel.org/r/20221107090753.1404679-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman

xhci: Remove device endpoints from bandwidth list when freeing the device

2022-11-03T15:00:20+00:00

commit 5aed5b7c2430ce318a8e62f752f181e66f0d1053 upstream. Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki Tested-by: Marek Marczykowski-Górecki Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman

xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices

2022-11-03T15:00:20+00:00

commit a611bf473d1f77b70f7188b5577542cb39b4701b upstream. For optimal power consumption of USB4 routers the XHCI PCIe endpoint used for tunneling must be in D3. Historically this is accomplished by a long list of PCIe IDs that correspond to these endpoints because the xhci_hcd driver will not default to allowing runtime PM for all devices. As both AMD and Intel have released new products with new XHCI controllers this list continues to grow. In reviewing the XHCI specification v1.2 on page 607 there is already a requirement that the PCI power management states D3hot and D3cold must be supported. In the quirk list, use this to indicate that runtime PM should be allowed on XHCI controllers. The following controllers are known to be xHC 1.2 and dropped explicitly: * AMD Yellow Carp * Intel Alder Lake * Intel Meteor Lake * Intel Raptor Lake [keep PCI ID for Alder Lake PCH for recently added quirk -Mathias] Cc: stable@vger.kernel.org Suggested-by: Mathias Nyman Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf Signed-off-by: Mario Limonciello Reviewed-by: Mika Westerberg Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Add quirk to reset host back to default state at shutdown

2022-11-03T15:00:20+00:00

commit 34cd2db408d591bc15771cbcc90939ade0a99a21 upstream. Systems based on Alder Lake P see significant boot time delay if boot firmware tries to control usb ports in unexpected link states. This is seen with self-powered usb devices that survive in U3 link suspended state over S5. A more generic solution to power off ports at shutdown was attempted in commit 83810f84ecf1 ("xhci: turn off port power in shutdown") but it caused regression. Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and ports back to default state in shutdown. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller

2022-11-03T15:00:19+00:00

commit 4f547472380136718b56064ea5689a61e135f904 upstream. This appears to fix the error: "xhci_hcd

; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13" that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub. ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0 Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3 Cc: stable@vger.kernel.org Signed-off-by: Jens Glathe Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman

usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()

2022-10-21T10:39:23+00:00

[ Upstream commit 7e271f42a5cc3768cd2622b929ba66859ae21f97 ] xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: host: xhci-plat: suspend/resume clks for brcm

2022-10-21T10:39:21+00:00

[ Upstream commit c69400b09e471a3f1167adead55a808f0da6534a ] The xhci_plat_brcm xhci block can enter suspend with clock disabled to save power and re-enable them on resume. Make use of the XHCI_SUSPEND_RESUME_CLKS quirk to do so. Reviewed-by: Florian Fainelli Signed-off-by: Justin Chen Link: https://lore.kernel.org/r/1660170455-15781-3-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin