kernel/linux.git/drivers/usb/host, branch linux-5.9.y

xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI

2020-12-21T12:28:20+00:00

commit 5a8e3229ac27956bdcc25b2709e5d196d109a27a upstream. Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge. Signed-off-by: Mika Westerberg Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20201208092912.1773650-5-mathias.nyman@linux.intel.com Cc: stable Signed-off-by: Greg Kroah-Hartman

xhci-pci: Allow host runtime PM as default for Intel Alpine Ridge LP

2020-12-21T12:28:19+00:00

commit c4d1ca05b8e68a4b5a3c4455cb6ec25b3df6d9dd upstream. The xHCI controller on Alpine Ridge LP keeps the whole Thunderbolt controller awake if the host controller is not allowed to sleep. This is the case even if no USB devices are connected to the host. Add the Intel Alpine Ridge LP product-id to the list of product-ids for which we allow runtime PM by default. Fixes: 2815ef7fe4d4 ("xhci-pci: allow host runtime PM as default for Intel Alpine and Titan Ridge") Cc: Reviewed-by: Mika Westerberg Signed-off-by: Hans de Goede Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20201208092912.1773650-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Give USB2 ports time to enter U3 in bus suspend

2020-12-21T12:28:19+00:00

commit c1373f10479b624fb6dba0805d673e860f1b421d upstream. If a USB2 device wakeup is not enabled/supported the link state may still be in U0 in xhci_bus_suspend(), where it's then manually put to suspended U3 state. Just as with selective suspend the device needs time to enter U3 suspend before continuing with further suspend operations (e.g. system suspend), otherwise we may enter system suspend with link state in U0. [commit message rewording -Mathias] Cc: Signed-off-by: Li Jun Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20201208092912.1773650-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: ohci-omap: Fix descriptor conversion

2020-12-16T09:58:29+00:00

[ Upstream commit 45c5775460f32ed8cdb7c16986ae1a2c254346b3 ] There were a bunch of issues with the patch converting the OMAP1 OSK board to use descriptors for controlling the USB host: - The chip label was incorrect - The GPIO offset was off-by-one - The code should use sleeping accessors This patch tries to fix all issues at the same time. Cc: Aaro Koskinen Reported-by: Aaro Koskinen Fixes: 15d157e87443 ("usb: ohci-omap: Convert to use GPIO descriptors") Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20201130083033.29435-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: hisilicon: fix refercence leak in xhci_histb_probe

2020-11-18T18:22:26+00:00

commit 76255470ffa2795a44032e8b3c1ced11d81aa2db upstream. pm_runtime_get_sync() will increment pm usage at first and it will resume the device later. We should decrease the usage count whetever it succeeded or failed(maybe runtime of the device has error, or device is in inaccessible state, or other error state). If we do not call put operation to decrease the reference, it will result in reference leak in xhci_histb_probe. Moreover, this device cannot enter the idle state and always stay busy or other non-idle state later. So we fixed it by jumping to error handling branch. Fixes: c508f41da0788 ("xhci: hisilicon: support HiSilicon STB xHCI host controller") Signed-off-by: Zhang Qilong Link: https://lore.kernel.org/r/20201106122221.2304528-1-zhangqilong3@huawei.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: host: fsl-mph-dr-of: check return of dma_set_mask()

2020-11-05T10:51:39+00:00

commit 3cd54a618834430a26a648d880dd83d740f2ae30 upstream. fsl_usb2_device_register() should stop init if dma_set_mask() return error. Fixes: cae058610465 ("drivers/usb/host: fsl: Set DMA_MASK of usb platform device") Reviewed-by: Peter Chen Signed-off-by: Ran Wang Link: https://lore.kernel.org/r/20201010060308.33693-1-ran.wang_1@nxp.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: xhci: Workaround for S3 issue on AMD SNPS 3.0 xHC

2020-11-05T10:51:38+00:00

commit 2a632815683d2d34df52b701a36fe5ac6654e719 upstream. On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, need to disable a bit which is enable in sparse controller. Cc: stable@vger.kernel.org #v4.19+ Signed-off-by: Sanket Goswami Signed-off-by: Sandeep Singh Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: xhci: omit duplicate actions when suspending a runtime suspended host.

2020-11-05T10:51:22+00:00

[ Upstream commit 18a367e8947d72dd91b6fc401e88a2952c6363f7 ] If the xhci-plat.c is the platform driver, after the runtime pm is enabled, the xhci_suspend is called if nothing is connected on the port. When the system goes to suspend, it will call xhci_suspend again if USB wakeup is enabled. Since the runtime suspend wakeup setting is not always the same as system suspend wakeup setting, eg, at runtime suspend we always need wakeup if the controller is in low power mode; but at system suspend, we may not need wakeup. So, we move the judgement after changing wakeup setting. [commit message rewording -Mathias] Reviewed-by: Jun Li Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200918131752.16488-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: host: ehci-tegra: Fix error handling in tegra_ehci_probe()

2020-11-05T10:51:12+00:00

[ Upstream commit 32d174d2d5eb318c34ff36771adefabdf227c186 ] If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in tegra_ehci_probe(). Fixes: 79ad3b5add4a ("usb: host: Add EHCI driver for NVIDIA Tegra SoCs") Acked-by: Alan Stern Acked-by: Thierry Reding Signed-off-by: Tang Bin Link: https://lore.kernel.org/r/20201026090657.49988-1-tangbin@cmss.chinamobile.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: ohci: Default to per-port over-current protection

2020-10-29T09:12:16+00:00

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ] Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired. Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub. We now alter the default to use per-port over-current protection. This patch results in the following configuration changes depending on quirks: - For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection. - For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry. Suggested-by: Alan Stern Acked-by: Alan Stern Signed-off-by: Hamish Martin Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin