kernel/linux.git/drivers/usb/host/xhci-plat.h, branch v6.6.129

usb: xhci-plat: Don't include xhci.h

2024-05-17T10:02:29+00:00

commit 4a237d55446ff67655dc3eed2d4a41997536fc4c upstream. The xhci_plat.h should not need to include the entire xhci.h header. This can cause redefinition in dwc3 if it selectively includes some xHCI definitions. This is a prerequisite change for a fix to disable suspend during initialization for dwc3. Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/310acfa01c957a10d9feaca3f7206269866ba2eb.1713394973.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: xhci-plat: Convert to platform remove callback returning void

2023-05-30T14:27:17+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). To convert the xhci-plat driver, change the prototype of xhci_plat_remove() to return void. As this function is exported and used by the xhci-rcar driver, convert this driver at the same time accordingly. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230530071913.2192214-5-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

xhci: split out rcar/rz support from xhci-plat.c

2023-02-02T10:12:59+00:00

The USB_XHCI_RZV2M and USB_RENESAS_USB3 select other drivers based on the enabled SoC types, which leads to build failures when the dependencies are not met: WARNING: unmet direct dependencies detected for USB_RZV2M_USB3DRD Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=n] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y]) Selected by [m]: - USB_XHCI_RZV2M [=m] && USB_SUPPORT [=y] && USB [=y] && USB_XHCI_HCD [=m] && USB_XHCI_PLATFORM [=m] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y]) ERROR: modpost: "rzv2m_usb3drd_reset" [drivers/usb/host/xhci-plat-hcd.ko] undefined! The xhci-rcar driver has a reverse dependency with the xhci core, and it depends on the UDC driver in turn. To untangle this, make the xhci-rcar.ko driver a standalone module that just calls into the xhci-plat.ko module like other drivers do. This allows handling the dependency on the USB_RZV2M_USB3DRD driver to only affect the xhci-rcar module and simplify the xhci-plat module. It also allows leaving out the hacks for broken dma mask and nested devices from the rcar side and keep that only in the generic xhci driver. As a future cleanup, the marvell and dwc3 specific bits of xhci-plat.c could be moved out as well, but that is not required for this bugfix. Fixes: c52c9acc415e ("xhci: host: Add Renesas RZ/V2M SoC support") Signed-off-by: Arnd Bergmann Tested-by: Biju Das Link: https://lore.kernel.org/r/20230131150531.12347-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720"

2022-02-25T13:42:21+00:00

This reverts commit 3241929b67d28c83945d3191c6816a3271fd6b85. Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return -EOPNOTSUPP from phy_power_on() callback anymore. So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and then also whole xhci_mvebu_a3700_plat_setup() function which is there just to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT. xhci plat_setup callback is not used by any other xhci plat driver, so remove this callback completely. Signed-off-by: Pali Rohár Signed-off-by: Marek Behún Acked-by: Miquel Raynal Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20220203214444.1508-5-kabel@kernel.org Signed-off-by: Vinod Koul

usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720

2021-02-03T10:26:47+00:00

Older ATF does not provide SMC call for USB 3.0 phy power on functionality and therefore initialization of xhci-hcd is failing when older version of ATF is used. In this case phy_power_on() function returns -EOPNOTSUPP. [ 3.108467] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware [ 3.117250] phy phy-d0018300.phy.0: phy poweron failed --> -95 [ 3.123465] xhci-hcd: probe of d0058000.usb failed with error -95 This patch introduces a new plat_setup callback for xhci platform drivers which is called prior calling usb_add_hcd() function. This function at its beginning skips PHY init if hcd->skip_phy_initialization is set. Current init_quirk callback for xhci platform drivers is called from xhci_plat_setup() function which is called after chip reset completes. It happens in the middle of the usb_add_hcd() function and therefore this callback cannot be used for setting if PHY init should be skipped or not. For Armada 3720 this patch introduce a new xhci_mvebu_a3700_plat_setup() function configured as a xhci platform plat_setup callback. This new function calls phy_power_on() and in case it returns -EOPNOTSUPP then XHCI_SKIP_PHY_INIT quirk is set to instruct xhci-plat to skip PHY initialization. This patch fixes above failure by ignoring 'not supported' error in xhci-hcd driver. In this case it is expected that phy is already power on. It fixes initialization of xhci-hcd on Espressobin boards where is older Marvell's Arm Trusted Firmware without SMC call for USB 3.0 phy power. This is regression introduced in commit bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") where USB 3.0 phy was defined and therefore xhci-hcd on Espressobin with older ATF started failing. Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") Cc: # 5.1+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno Cc: # 5.1+: f768e718911e: usb: host: xhci-plat: add priv quirk for skip PHY initialization Tested-by: Tomasz Maciej Nowak Tested-by: Yoshihiro Shimoda # On R-Car Reviewed-by: Yoshihiro Shimoda # xhci-plat Acked-by: Mathias Nyman Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20210201150803.7305-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv

2020-09-20T14:18:00+00:00

Some platforms (eg cdns3) may have special sequences between xhci_bus_suspend and xhci_suspend, add .suspend_quick for it. Reviewed-by: Jun Li Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200918131752.16488-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: host: Use the correct style for SPDX License Identifier

2020-04-16T12:32:46+00:00

This patch corrects the SPDX License Identifier style in header files related to USB host controller drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches Signed-off-by: Nishad Kamdar Link: https://lore.kernel.org/r/20200404092135.GA4522@nishad Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-plat: add quirks member into struct xhci_plat_priv

2019-09-03T13:53:11+00:00

To simplify adding xhci->quirks instead of the .init_quirk() function, this patch adds a new parameter "quirks" into the struct xhci_plat_priv. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/1567425698-27560-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman

USB: host: xhci: Remove redundant license text

2017-11-07T14:45:02+00:00

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Matthias Brugger Cc: Thierry Reding Cc: Jonathan Hunter Acked-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman