kernel/linux.git/drivers/usb/host/ohci-platform.c, branch v4.9.331

Revert "usb/ohci-platform: Fix a warning when hibernating"

2020-07-22T07:10:50+00:00

This reverts commit 104592a5233d77322c3e527e3925dc7c5a30a6af. Eugeniu Rosca writes: On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote: >After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: >Set PM runtime as active on resume") into downstream v4.14.x, we started >to consistently experience below panic [1] on every second s2ram of >R-Car H3 Salvator-X Renesas reference board. > >After some investigations, we concluded the following: > - the issue does not exist in vanilla v5.8-rc4+ > - [bisecting shows that] the panic on v4.14.186 is caused by the lack > of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device > link support"). Getting evidence for that is easy. Reverting > 987351e1ea7772 in vanilla leads to a similar backtrace [2]. > >Questions: > - Backporting 987351e1ea7772 ("phy: core: Add consumer device > link support") to v4.14.187 looks challenging enough, so probably not > worth it. Anybody to contradict this? > - Assuming no plans to backport the missing mainline commit to v4.14.x, > should the following three v4.14.186 commits be reverted on v4.14.x? > * baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating") > * 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume") > * 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") Signed-off-by: Sasha Levin

usb/ohci-platform: Fix a warning when hibernating

2020-06-30T19:38:25+00:00

[ Upstream commit 1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ] The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/ Acked-by: Alan Stern Signed-off-by: Qais Yousef CC: Tony Prisk CC: Greg Kroah-Hartman CC: Mathias Nyman CC: Oliver Neukum CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

ohci-platform: Add support for controllers with multiple reset lines

2016-06-08T05:21:41+00:00

At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple reset lines, the controller will not initialize while the reset for its companion is still asserted, which means we need to de-assert 2 resets for the controller to work. Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

USB: host: use to_platform_device

2016-01-25T05:00:33+00:00

Use to_platform_device() instead of open-coding it. Signed-off-by: Geliang Tang Signed-off-by: Greg Kroah-Hartman

usb: ohci-platform: Use devm_of_phy_get_by_index

2015-05-11T16:12:25+00:00

Getting phys by index instead of phy names so that we do not have to create a naming scheme when multiple phys are present Signed-off-by: Arun Ramamurthy Reviewed-by: Ray Jui Reviewed-by: Scott Branden Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I

usb: ohci-platform: add support for multiple phys per controller

2015-01-25T13:04:21+00:00

Added support for cases where one controller is connected to multiple phys Signed-off-by: Arun Ramamurthy Reviewed-by: Ray Jui Reviewed-by: Scott Branden Tested-by: Scott Branden Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB: host: Remove hard-coded octeon platform information for ehci/ohci

2015-01-09T20:29:57+00:00

Instead rely on device tree information for ehci and ohci. This was suggested with http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=1401358203-60225-4-git-send-email-alex.smith%40imgtec.com "The device tree will *always* have correct ehci/ohci clock configuration, so use it. This allows us to remove a big chunk of platform configuration code from octeon-platform.c." More or less I rebased that patch on Alan's work to remove ehci-octeon and ohci-octeon drivers. Cc: David Daney Cc: Alex Smith Cc: Alan Stern Signed-off-by: Andreas Herrmann Acked-by: Ralf Baechle Tested-by: Aaro Koskinen Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09+00:00

Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev__once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...

host: ohci-platform: remove duplicate check on resource

2014-11-07T17:01:50+00:00

Sanity check on resource happening with devm_ioremap_resource(). Signed-off-by: Varka Bhadram Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: ehci/ohci-platform: use SIMPLE_DEV_PM_OPS to support hibernation

2014-11-03T23:38:17+00:00

ehci/ohci-platform just define .suspend/.resume functions for dev_pm_ops, but in order to support both STR(suspend-to-ram) and hibernation, other callbacks such as .freeze/.thaw are also required. Registering all required callbacks for both STR and hibernation can be done by SIMPLE_DEV_PM_OPS macro function. Signed-off-by: Wonhong Kwon Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman