kernel/linux.git/drivers/usb/host/Makefile, branch v5.9.12

usb: renesas-xhci: Add the renesas xhci driver

2020-05-15T13:44:35+00:00

This add a new driver for renesas xhci which is basically a firmware loader for uPD720201 and uPD720202 w/o ROM. The xhci-pci driver will invoke this driver for loading/unloading on relevant devices. This patch adds a firmware loader for the uPD720201K8-711-BAC-A and uPD720202K8-711-BAA-A variant. Both of these chips are listed in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as devices which need the firmware loader on page 2 in order to work as they "do not support the External ROM". The "Firmware Download Sequence" is describe in chapter "7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131. The firmware "K2013080.mem" is available from a USB3.0 Host to PCIe Adapter (PP2U-E card) "Firmware download" archive. An alternative version can be sourced from Netgear's WNDR4700 GPL archives. The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3 (2012-06-15) state that the firmware is for the following devices: - uPD720201 ES 2.0 sample whose revision ID is 2. - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3. - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2. [vkoul: fixed comments: used macros for timeout count and delay removed renesas_fw_alive_check cleaned renesas_fw_callback removed recursion for renesas_fw_download add register defines and field names move to a separate file make fw loader as sync probe so that we execute in probe and prevent race make xhci-pci-renesas a seprate module] Signed-off-by: Christian Lamparter Signed-off-by: Bjorn Andersson Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20200514122039.300417-3-vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: host: Add ability to build new Broadcom STB USB drivers

2020-05-13T12:29:09+00:00

Add the build system changes needed to get the Broadcom STB XHCI, EHCI and OHCI functionality working. The OHCI support does not require anything unique to Broadcom so the standard ohci-platform driver is being used. Also update MAINTAINERS. Signed-off-by: Al Cooper Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20200512150019.25903-6-alcooperx@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: remove ehci-w90x900 driver

2019-08-10T07:28:28+00:00

The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20190809202749.742267-16-arnd@arndb.de Signed-off-by: Greg Kroah-Hartman

USB: Move wusbcore and UWB to staging as it is obsolete

2019-08-08T05:52:01+00:00

The UWB and wusbcore code is long obsolete, so let us just move the code out of the real part of the kernel and into the drivers/staging/ location with plans to remove it entirely in a few releases. Link: https://lore.kernel.org/r/20190806101509.GA11280@kroah.com Signed-off-by: Greg Kroah-Hartman

USB: EHCI: make ehci-mv a separate driver

2018-09-20T11:07:55+00:00

This is done do that it could be enabled alongside other platform EHCI glue drivers on multiplatform kernels. Signed-off-by: Lubomir Rintel Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

USB host: Add USB ehci support for nuvoton npcm7xx platform

2018-06-25T13:59:15+00:00

This patch adds support for ehci controller for the Nuvoton npcm7xx platform. Most of the code was taken from ehci-spear.c + specific initialization code Signed-off-by: Avi Fishman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

xhci: hisilicon: support HiSilicon STB xHCI host controller

2018-05-24T16:03:07+00:00

This commit adds support for HiSilicon STB xHCI host controller. There are two xHCI host controllers on HiSilicon STB SoCs. Each one requires additional configuration before exposing interface compliant with xHCI. Reviewed-by: Chunfeng Yun Signed-off-by: Jianguo Sun Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

xhci: Add Intel extended cap / otg phy mux handling

2018-03-22T12:40:10+00:00

The xHCI controller on various Intel SoCs has an extended cap mmio-range which contains registers to control the muxing to the xHCI (host mode) or the dwc3 (device mode) and vbus-detection for the otg usb-phy. Having a role-sw driver included in the xHCI code (under drivers/usb/host) is not desirable. So this commit adds a simple handler for this extended capability, which creates a platform device with the caps mmio region as resource, this allows us to write a separate platform role-sw driver for the role-switch. Note this commit adds a call to the new xhci_ext_cap_init() function to xhci_pci_probe(), it is added here because xhci_ext_cap_init() must be called only once. If in the future we also want to handle ext-caps on non pci xHCI HCDs from xhci_ext_cap_init() a call to it should also be added to other bus probe paths. Signed-off-by: Hans de Goede Acked-by: Mathias Nyman Reviewed-by: Andy Shevchenko Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

usb: xhci: Add DbC support in xHCI driver

2017-12-08T16:43:52+00:00

xHCI compatible USB host controllers(i.e. super-speed USB3 controllers) can be implemented with the Debug Capability(DbC). It presents a debug device which is fully compliant with the USB framework and provides the equivalent of a very high performance full-duplex serial link. The debug capability operation model and registers interface are defined in 7.6.8 of the xHCI specification, revision 1.1. The DbC debug device shares a root port with the xHCI host. By default, the debug capability is disabled and the root port is assigned to xHCI. When the DbC is enabled, the root port will be assigned to the DbC debug device, and the xHCI sees nothing on this port. This implementation uses a sysfs node named under the xHCI device to manage the enabling and disabling of the debug capability. When the debug capability is enabled, it will present a debug device through the debug port. This debug device is fully compliant with the USB3 framework, and it can be enumerated by a debug host on the other end of the USB link. As soon as the debug device is configured, a TTY serial device named /dev/ttyDBC0 will be created. Signed-off-by: Lu Baolu Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2017-11-14T05:14:07+00:00

Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...