kernel/linux.git/drivers/usb/host/Makefile, branch v4.14.263

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

usb: host: ohci-omap3: Remove driver in favor of ohci-platform

2017-06-03T09:08:05+00:00

This driver is no longer needed and can be removed. The reason why it's safe to remove this driver is that most omap devices don't have a USB low-speed or full-speed compatible PHY installed and configured with drivers/mfd/omap-usb-host.c. This means that devices like beagleboard and pandaboard need to use a high-speed USB hub in order to use devices like keyboard and mice. Currently the only known configured for a full-speed PHY is the mdm6600 modem on droid 4 and I've verified it works just fine with ohci-platform. Acked-by: Alan Stern Acked-by: Roger Quadros Reviewed-by: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

usb: add CONFIG_USB_PCI for system have both PCI HW and non-PCI based USB HW

2017-03-17T04:16:56+00:00

a lot of embeded system SOC (e.g. freescale T2080) have both PCI and USB modules. But USB module is controlled by registers directly, it have no relationship with PCI module. when say N here it will not build PCI related code in USB driver. Signed-off-by: yuan linyu Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: OHCI: make ohci-da8xx a separate driver

2016-10-27T14:59:59+00:00

Separate the Davinci OHCI host controller driver from ohci-hcd host code so that it can be built as a separate driver module. This work is part of enabling multi-platform kernels on ARM Tested-by: David Lechner Signed-off-by: Manjunath Goudar [Axel: adapted and rebased, fixed minor comments] Signed-off-by: Axel Haslam Signed-off-by: Greg Kroah-Hartman

usb: xhci: Add NVIDIA Tegra XUSB controller driver

2016-04-29T14:48:58+00:00

Add support for the on-chip XUSB controller present on Tegra SoCs. This controller, when loaded with external firmware, exposes an interface compliant with xHCI. This driver loads the firmware, starts the controller, and is able to service host-specific messages sent by the controller's firmware. The controller also supports USB device mode as well as powergating of the SuperSpeed and host-controller logic when not in use, but support for these is not yet implemented. Based on work by: Ajay Gupta Bharath Yadav Andrew Bresticker Cc: Mathias Nyman Cc: Greg Kroah-Hartman Acked-by: Mathias Nyman Signed-off-by: Thierry Reding

usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol

2016-03-04T13:14:29+00:00

The USB_FSL_MPH_DR_OF symbol is used to ensure the code that interprets the DR device node is built whenever one of the two drivers (EHCI or UDC) for the platform is enabled. However, if CONFIG_USB is disabled and we only support gadget mode, this causes a Kconfig warning: warning: (USB_FSL_USB2) selects USB_FSL_MPH_DR_OF which has unmet direct dependencies (USB_SUPPORT && USB) We can avoid this warning by simply no longer using the symbol, and making sure we enter the drivers/usb/host/ directory when the UDC driver is enabled that needs the file, and then we use Makefile syntax to ensure the file is built-in if needed. There is currently a dependency on CONFIG_OF, but this is redundant, as we already know that this is set unconditionally for the platforms that use this driver. Signed-off-by: Arnd Bergmann Signed-off-by: Felipe Balbi

xhci: mediatek: support MTK xHCI host controller

2015-12-01T18:45:51+00:00

There some vendor quirks for MTK xhci host controller: 1. It defines some extra SW scheduling parameters for HW to minimize the scheduling effort for synchronous and interrupt endpoints. The parameters are put into reseved DWs of slot context and endpoint context. 2. Its IMODI unit for Interrupter Moderation register is 8 times as much as that defined in xHCI spec. 3. Its TDS in Normal TRB defines a number of packets that remains to be transferred for a TD after processing all Max packets in all previous TRBs. Signed-off-by: Chunfeng Yun Tested-by: Daniel Thompson Reviewed-by: Daniel Thompson Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb-host: Remove fusbh200 driver

2015-10-17T06:44:33+00:00

fusbh200 and fotg210 are very similar. The initial idea was to consolidate both drivers but I'm afraid fusbh200 is not being used. This patch remove the fusbh200 source code, update Kconfig and two Makefiles. Signed-off-by: Peter Senna Tschudin Acked-by: John Chiang Signed-off-by: Greg Kroah-Hartman

usb: xhci: Makefile: move xhci-pci and xhci-plat-hcd after xhci-hcd

2015-10-17T06:34:22+00:00

Module xhci-pci and xhci-plat-hcd depend on xhci-hcd. Module xhci-hcd should be put at a place before xhci-pci and xhci-plat-hcd. Otherwise, xhci_hcd_init() might be executed after other functions in xhci-hcd if they are all selected to be built in. Signed-off-by: Lu Baolu Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

drivers:usb:fsl:Make fsl ehci drv an independent driver module

2015-05-24T16:29:36+00:00

Make Freescale EHCI driver an independent entity from ehci-hcd.c. This involves - using module_init/module_exit functions - using overrides structure - some necessary code cleanup Signed-off-by: Ramneek Mehresh Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman