kernel/linux.git/drivers/usb/host/Kconfig, branch v6.19.11

usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support

2025-09-17T10:43:18+00:00

The USB3.2 Gen2 Host controller (a.k.a USB3HOST), IP found on the RZ/G3E SoC is similar to R-Car XHCI, but it doesn't require any firmware. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20250916150255.4231-7-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman

USB: host: omap: Do not enable by default during compile testing

2025-04-25T11:20:23+00:00

Enabling the compile test should not cause automatic enabling of all drivers, but only allow to choose to compile them. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20250417074634.81295-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman

xhci: sideband: add initial api to register a secondary interrupter entity

2025-04-11T11:02:29+00:00

Introduce XHCI sideband, which manages the USB endpoints being requested by a client driver. This is used for when client drivers are attempting to offload USB endpoints to another entity for handling USB transfers. XHCI sec intr will allow for drivers to fetch the required information about the transfer ring, so the user can submit transfers independently. Expose the required APIs for drivers to register and request for a USB endpoint and to manage XHCI secondary interrupters. Driver renaming, multiple ring segment page linking, proper endpoint clean up, and allowing module compilation added by Wesley Cheng to complete original concept code by Mathias Nyman. Tested-by: Puma Hsu Tested-by: Daehwan Jung Signed-off-by: Mathias Nyman Co-developed-by: Wesley Cheng Signed-off-by: Wesley Cheng Acked-by: Mark Brown Link: https://lore.kernel.org/r/20250409194804.3773260-2-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman

xhci-pci: Make xhci-pci-renesas a proper modular driver

2024-08-07T10:51:38+00:00

If CONFIG_USB_XHCI_PCI_RENESAS is enabled, xhci-pci conditionally calls into the xhci-pci-renesas module, which means both modules must be loaded to use any xHCI PCI controller. The MODULE_FIRMWARE declaration in the base xhci-pci module causes initramfs-tools to check for and warn about missing firmware for the Renesas xHCI controllers, when any xHCI PCI controller is present. And because of the previous oddity, simply moving this declaration to xhci-pci-renesas wouldn't help. To fix this, reverse the relationship between the modules: - Remove the quirk for the Renesas xHCIs, and the driver_data structure used only for them - In xhci-pci: - Rename xhci_pci_probe() to xhci_pci_common_probe() - Export xhci_pci_common_probe() and xhci_pci_remove() - Use a new probe function that rejects the Renesas xHCIs and then calls the common probe function - In xhci-pci-renesas: - Stop exporting renesas_xhci_check_request_fw() - Add a probe function that calls renesas_xhci_check_request_fw() followed by xhci_pci_common_probe() - Add and register a new pci_driver matching only the Renesas xHCIs and using its own probe function, but with other operations the same as in xhci-pci - Make CONFIG_USB_XHCI_PCI_RENESAS depend on CONFIG_USB_XHCI_PCI, not the other way around Finally, move the MODULE_FIRMWARE declaration to xhci-pci-renesas. Signed-off-by: Ben Hutchings Tested-by: Cyril Brulebois Link: https://lore.kernel.org/r/ZqqfXYRJf7kGaqus@decadent.org.uk Signed-off-by: Greg Kroah-Hartman

usb: add HAS_IOPORT dependencies

2023-05-29T14:28:34+00:00

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Signed-off-by: Niklas Schnelle Link: https://lore.kernel.org/r/20230522105049.1467313-37-schnelle@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

usb: host: u132-hcd: Delete driver

2023-03-21T13:06:11+00:00

This driver got its last actual change in 2006 and is probably unused as nowbody should use a cardbus to USB adapter any more. If it were still used, the driver was in urgent need for maintainer love. (Explicit kref handling, underdocumented locking, .remove() can return errors ...) Also the link in the (now removed) help text doesn't look actively maintained. According to archive.org it forwarded to http://www.copenhagen-hotel.net/ already back in 2018. So don't waste more time on this driver and just delete it. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230321103638.343886-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-02-24T20:07:00+00:00

Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1. Nothing major in here, just lots of good development, including: - Thunderbolt additions for new device support and features - xhci driver updates and cleanups - USB gadget media driver updates (includes media core changes that were acked by the v4l2 maintainers) - lots of other USB gadget driver updates for new features - dwc3 driver updates and fixes - minor debugfs leak fixes - typec driver updates and additions - dt-bindings conversions to yaml - other small bugfixes and driver updates All have been in linux-next for a while with no reported issues" * tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits) usb: dwc3: xilinx: Remove unused of_gpio,h usb: typec: pd: Add higher capability sysfs for sink PDO usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO usb: dwc3: pci: add support for the Intel Meteor Lake-M usb: gadget: u_ether: Don't warn in gether_setup_name_default() usb: gadget: u_ether: Convert prints to device prints usb: gadget: u_serial: Add null pointer check in gserial_resume usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails xhci: host: potential NULL dereference in xhci_generic_plat_probe() dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev of: device: Do not ignore error code in of_device_uevent_modalias of: device: Ignore modalias of reused nodes usb: gadget: configfs: Fix set but not used variable warning usb: gadget: uvc: Use custom strings if available usb: gadget: uvc: Allow linking function to string descs usb: gadget: uvc: Pick up custom string descriptor IDs usb: gadget: uvc: Allow linking XUs to string descriptors usb: gadget: configfs: Attach arbitrary strings to cdev usb: gadget: configfs: Support arbitrary string descriptors ...

usb: remove the dead USB_OHCI_SH option

2023-02-03T07:25:30+00:00

USB_OHCI_SH is a dummy option that never builds any code, remove it. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20230113062339.1909087-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman

xhci: split out rcar/rz support from xhci-plat.c

2023-02-02T10:12:59+00:00

The USB_XHCI_RZV2M and USB_RENESAS_USB3 select other drivers based on the enabled SoC types, which leads to build failures when the dependencies are not met: WARNING: unmet direct dependencies detected for USB_RZV2M_USB3DRD Depends on [n]: USB_SUPPORT [=y] && USB_GADGET [=n] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y]) Selected by [m]: - USB_XHCI_RZV2M [=m] && USB_SUPPORT [=y] && USB [=y] && USB_XHCI_HCD [=m] && USB_XHCI_PLATFORM [=m] && (ARCH_R9A09G011 [=n] || COMPILE_TEST [=y]) ERROR: modpost: "rzv2m_usb3drd_reset" [drivers/usb/host/xhci-plat-hcd.ko] undefined! The xhci-rcar driver has a reverse dependency with the xhci core, and it depends on the UDC driver in turn. To untangle this, make the xhci-rcar.ko driver a standalone module that just calls into the xhci-plat.ko module like other drivers do. This allows handling the dependency on the USB_RZV2M_USB3DRD driver to only affect the xhci-rcar module and simplify the xhci-plat module. It also allows leaving out the hacks for broken dma mask and nested devices from the rcar side and keep that only in the generic xhci driver. As a future cleanup, the marvell and dwc3 specific bits of xhci-plat.c could be moved out as well, but that is not required for this bugfix. Fixes: c52c9acc415e ("xhci: host: Add Renesas RZ/V2M SoC support") Signed-off-by: Arnd Bergmann Tested-by: Biju Das Link: https://lore.kernel.org/r/20230131150531.12347-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

xhci: host: Add Renesas RZ/V2M SoC support

2023-01-25T14:48:17+00:00

RZ/V2M is similar to R-Car XHCI but it doesn't require any firmware, we need to reset the USB Host reset release in DRD Module before accessing host registers. Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20230121145853.4792-10-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman