kernel/linux.git/drivers/usb/gadget, branch v6.1.124

usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer

2024-12-19T17:08:49+00:00

commit 4cfbca86f6a8b801f3254e0e3c8f2b1d2d64be2b upstream. Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 Fixes: c1dca562be8a ("usb gadget: split out serial core") Cc: stable@vger.kernel.org Suggested-by: Prashanth K Signed-off-by: Lianqin Hu Acked-by: Prashanth K Link: https://lore.kernel.org/r/TYUPR06MB62178DC3473F9E1A537DCD02D2362@TYUPR06MB6217.apcprd06.prod.outlook.com Signed-off-by: Greg Kroah-Hartman

Revert "usb: gadget: composite: fix OS descriptors w_value logic"

2024-12-14T18:54:01+00:00

commit 51cdd69d6a857f527d6d0697a2e1f0fa8bca1005 upstream. This reverts commit ec6ce7075ef879b91a8710829016005dc8170f17. Fix installation of WinUSB driver using OS descriptors. Without the fix the drivers are not installed correctly and the property 'DeviceInterfaceGUID' is missing on host side. The original change was based on the assumption that the interface number is in the high byte of wValue but it is in the low byte, instead. Unfortunately, the fix is based on MS documentation which is also wrong. The actual USB request for OS descriptors (using USB analyzer) looks like: Offset 0 1 2 3 4 5 6 7 0x000 C1 A1 02 00 05 00 0A 00 C1: bmRequestType (device to host, vendor, interface) A1: nas magic number 0002: wValue (2: nas interface) 0005: wIndex (5: get extended property i.e. nas interface GUID) 008E: wLength (142) The fix was tested on Windows 10 and Windows 11. Cc: stable@vger.kernel.org Fixes: ec6ce7075ef8 ("usb: gadget: composite: fix OS descriptors w_value logic") Signed-off-by: Michal Vrastil Signed-off-by: Elson Roy Serrao Acked-by: Peter korsgaard Link: https://lore.kernel.org/r/20241113235433.20244-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman

USB: gadget: dummy-hcd: Fix "task hung" problem

2024-11-08T15:26:44+00:00

[ Upstream commit 5189df7b8088268012882c220d6aca4e64981348 ] The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. Reported-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/6709234e.050a0220.3e960.0011.GAE@google.com/ Tested-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com Signed-off-by: Alan Stern Fixes: a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler") Cc: Marcello Sylvester Bauer Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/2dab644e-ef87-4de8-ac9a-26f100b2c609@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: dummy_hcd: execute hrtimer callback in softirq context

2024-11-08T15:26:44+00:00

[ Upstream commit 9313d139aa25e572d860f6f673b73a20f32d7f93 ] Commit a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler") switched dummy_hcd to use hrtimer and made the timer's callback be executed in the hardirq context. With that change, __usb_hcd_giveback_urb now gets executed in the hardirq context, which causes problems for KCOV and KMSAN. One problem is that KCOV now is unable to collect coverage from the USB code that gets executed from the dummy_hcd's timer callback, as KCOV cannot collect coverage in the hardirq context. Another problem is that the dummy_hcd hrtimer might get triggered in the middle of a softirq with KCOV remote coverage collection enabled, and that causes a WARNING in KCOV, as reported by syzbot. (I sent a separate patch to shut down this WARNING, but that doesn't fix the other two issues.) Finally, KMSAN appears to ignore tracking memory copying operations that happen in the hardirq context, which causes false positive kernel-infoleaks, as reported by syzbot. Change the hrtimer in dummy_hcd to execute the callback in the softirq context. Reported-by: syzbot+2388cdaeb6b10f0c13ac@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2388cdaeb6b10f0c13ac Reported-by: syzbot+17ca2339e34a1d863aad@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=17ca2339e34a1d863aad Reported-by: syzbot+c793a7eca38803212c61@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=c793a7eca38803212c61 Reported-by: syzbot+1e6e0b916b211bee1bd6@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=1e6e0b916b211bee1bd6 Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202406141323.413a90d2-lkp@intel.com Fixes: a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler") Cc: stable@vger.kernel.org Acked-by: Marcello Sylvester Bauer Signed-off-by: Andrey Konovalov Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=edd9fe0d3a65b14588d5 Link: https://lore.kernel.org/r/20240904013051.4409-1-andrey.konovalov@linux.dev Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: dummy_hcd: Set transfer interval to 1 microframe

2024-11-08T15:26:44+00:00

[ Upstream commit 0a723ed3baa941ca4f51d87bab00661f41142835 ] Currently, the transfer polling interval is set to 1ms, which is the frame rate of full-speed and low-speed USB. The USB 2.0 specification introduces microframes (125 microseconds) to improve the timing precision of data transfers. Reducing the transfer interval to 1 microframe increases data throughput for high-speed and super-speed USB communication Signed-off-by: Marcello Sylvester Bauer Signed-off-by: Marcello Sylvester Bauer Link: https://lore.kernel.org/r/6295dbb84ca76884551df9eb157cce569377a22c.1712843963.git.sylv@sylv.io Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler

2024-11-08T15:26:44+00:00

[ Upstream commit a7f3813e589fd8e2834720829a47b5eb914a9afe ] The dummy_hcd transfer scheduler assumes that the internal kernel timer frequency is set to 1000Hz to give a polling interval of 1ms. Reducing the timer frequency will result in an anti-proportional reduction in transfer performance. Switch to a hrtimer to decouple this association. Signed-off-by: Marcello Sylvester Bauer Signed-off-by: Marcello Sylvester Bauer Reviewed-by: Alan Stern Link: https://lore.kernel.org/r/57a1c2180ff74661600e010c234d1dbaba1d0d46.1712843963.git.sylv@sylv.io Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: Add function wakeup support

2024-11-01T00:56:02+00:00

[ Upstream commit f0db885fb05d35befa81896db6b19eb3ee9ccdfe ] USB3.2 spec section 9.2.5.4 quotes that a function may signal that it wants to exit from Function Suspend by sending a Function Wake Notification to the host if it is enabled for function remote wakeup. Add an api in composite layer that can be used by the function drivers to support this feature. Also expose a gadget op so that composite layer can trigger a wakeup request to the UDC driver. Reviewed-by: Thinh Nguyen Signed-off-by: Elson Roy Serrao Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 705e3ce37bcc ("usb: dwc3: core: Fix system suspend on TI AM62 platforms") Signed-off-by: Sasha Levin

usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store

2024-11-01T00:56:02+00:00

[ Upstream commit 9499327714de7bc5cf6c792112c1474932d8ad31 ] The configfs store callback should return the number of bytes consumed not the total number of bytes we actually stored. These could differ if for example the passed in string had a newline we did not store. If the returned value does not match the number of bytes written the writer might assume a failure or keep trying to write the remaining bytes. For example the following command will hang trying to write the final newline over and over again (tested on bash 2.05b): echo foo > function_name Fixes: 993a44fa85c1 ("usb: gadget: f_uac2: allow changing interface name via configfs") Cc: stable Signed-off-by: Kevin Groeneveld Link: https://lore.kernel.org/r/20241006232637.4267-1-kgroeneveld@lenbrook.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: f_uac2: fix non-newline-terminated function name

2024-11-01T00:56:02+00:00

[ Upstream commit e60284b63245b84c3ae352427ed5ff8b79266b91 ] Most writes to configfs handle an optional newline, but do not require it. By using the number of bytes written as the limit for scnprintf() it is guaranteed that the final character in the buffer will be overwritten. This is expected if it is a newline but is undesirable when a string is written "as-is" (as libusbgx does, for example). Update the store function to strip an optional newline, matching the behaviour of usb_string_copy(). Signed-off-by: John Keeping Link: https://lore.kernel.org/r/20240708142553.3995022-1-jkeeping@inmusicbrands.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 9499327714de ("usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store") Signed-off-by: Sasha Levin

usb: gadget: f_uac2: Replace snprintf() with the safer scnprintf() variant

2024-11-01T00:56:01+00:00

[ Upstream commit 60034e0aedf507888c4a880f57011bb7f5d7700c ] There is a general misunderstanding amongst engineers that {v}snprintf() returns the length of the data *actually* encoded into the destination array. However, as per the C99 standard {v}snprintf() really returns the length of the data that *would have been* written if there were enough space for it. This misunderstanding has led to buffer-overruns in the past. It's generally considered safer to use the {v}scnprintf() variants in their place (or even sprintf() in simple cases). So let's do that. Link: https://lwn.net/Articles/69419/ Link: https://github.com/KSPP/linux/issues/105 Cc: James Gruber Cc: Yadwinder Singh Cc: Jaswinder Singh Cc: Ruslan Bilovol Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20231213164246.1021885-4-lee@kernel.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 9499327714de ("usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING store") Signed-off-by: Sasha Levin