kernel/linux.git/drivers/usb/gadget, branch linux-6.0.y

usb: gadget: f_hid: fix refcount leak on error path

2022-12-31T12:26:27+00:00

[ Upstream commit 70a3288a7586526315105c699b687d78cd32559a ] When failing to allocate report_desc, opts->refcnt has already been incremented so it needs to be decremented to avoid leaving the options structure permanently locked. Fixes: 21a9476a7ba8 ("usb: gadget: hid: add configfs support") Tested-by: Lee Jones Reviewed-by: Andrzej Pietrasiewicz Reviewed-by: Lee Jones Signed-off-by: John Keeping Link: https://lore.kernel.org/r/20221122123523.3068034-3-john@metanate.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: f_hid: fix f_hidg lifetime vs cdev

2022-12-31T12:26:27+00:00

[ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ] The embedded struct cdev does not have its lifetime correctly tied to the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN is held open while the gadget is deleted. This can readily be replicated with libusbgx's example programs (for conciseness - operating directly via configfs is equivalent): gadget-hid exec 3<> /dev/hidg0 gadget-vid-pid-remove exec 3<&- Pull the existing device up in to struct f_hidg and make use of the cdev_device_{add,del}() helpers. This changes the lifetime of the device object to match struct f_hidg, but note that it is still added and deleted at the same time. Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver") Tested-by: Lee Jones Reviewed-by: Andrzej Pietrasiewicz Reviewed-by: Lee Jones Signed-off-by: John Keeping Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: gadget: Fix use-after-free during usb config switch

2022-12-31T12:26:25+00:00

[ Upstream commit afdc12887f2b2ecf20d065a7d81ad29824155083 ] In the process of switching USB config from rndis to other config, if the hardware does not support the ->pullup callback, or the hardware encounters a low probability fault, both of them may cause the ->pullup callback to fail, which will then cause a system panic (use after free). The gadget drivers sometimes need to be unloaded regardless of the hardware's behavior. Analysis as follows: ======================================================================= (1) write /config/usb_gadget/g1/UDC "none" gether_disconnect+0x2c/0x1f8 rndis_disable+0x4c/0x74 composite_disconnect+0x74/0xb0 configfs_composite_disconnect+0x60/0x7c usb_gadget_disconnect+0x70/0x124 usb_gadget_unregister_driver+0xc8/0x1d8 gadget_dev_desc_UDC_store+0xec/0x1e4 (2) rm /config/usb_gadget/g1/configs/b.1/f1 rndis_deregister+0x28/0x54 rndis_free+0x44/0x7c usb_put_function+0x14/0x1c config_usb_cfg_unlink+0xc4/0xe0 configfs_unlink+0x124/0x1c8 vfs_unlink+0x114/0x1dc (3) rmdir /config/usb_gadget/g1/functions/rndis.gs4 panic+0x1fc/0x3d0 do_page_fault+0xa8/0x46c do_mem_abort+0x3c/0xac el1_sync_handler+0x40/0x78 0xffffff801138f880 rndis_close+0x28/0x34 eth_stop+0x74/0x110 dev_close_many+0x48/0x194 rollback_registered_many+0x118/0x814 unregister_netdev+0x20/0x30 gether_cleanup+0x1c/0x38 rndis_attr_release+0xc/0x14 kref_put+0x74/0xb8 configfs_rmdir+0x314/0x374 If gadget->ops->pullup() return an error, function rndis_close() will be called, then it will causes a use-after-free problem. ======================================================================= Fixes: 0a55187a1ec8 ("USB: gadget core: Issue ->disconnect() callback from usb_gadget_disconnect()") Signed-off-by: Jiantao Zhang Signed-off-by: TaoXue Link: https://lore.kernel.org/r/20221121130805.10735-1-water.zhangjiantao@huawei.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: fotg210-udc: Fix ages old endianness issues

2022-12-31T12:26:24+00:00

[ Upstream commit 46ed6026ca2181c917c8334a82e3eaf40a6234dd ] The code in the FOTG210 driver isn't entirely endianness-agnostic as reported by the kernel robot sparse testing. This came to the surface while moving the files around. The driver is only used on little-endian systems, so this causes no real-world regression, but it is nice to be strict and have some compile coverage also on big endian machines, so fix it up with the right LE accessors. Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver") Reported-by: kernel test robot Link: https://lore.kernel.org/linux-usb/202211110910.0dJ7nZCn-lkp@intel.com/ Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20221111090317.94228-1-linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: gadget: uvc: Prevent buffer overflow in setup handler

2022-12-21T16:41:13+00:00

commit 4c92670b16727365699fe4b19ed32013bab2c107 upstream. Setup function uvc_function_setup permits control transfer requests with up to 64 bytes of payload (UVC_MAX_REQUEST_SIZE), data stage handler for OUT transfer uses memcpy to copy req->actual bytes to uvc_event->data.data array of size 60. This may result in an overflow of 4 bytes. Fixes: cdda479f15cd ("USB gadget: video class function driver") Cc: stable Reviewed-by: Laurent Pinchart Reviewed-by: Daniel Scally Signed-off-by: Szymon Heidrich Link: https://lore.kernel.org/r/20221206141301.51305-1-szymon.heidrich@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: bdc: change state when port disconnected

2022-11-03T15:00:19+00:00

commit fb8f60dd1b67520e0e0d7978ef17d015690acfc1 upstream. When port is connected and then disconnected, the state stays as configured. Which is incorrect as the port is no longer configured, but in a not attached state. Signed-off-by: Justin Chen Acked-by: Florian Fainelli Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Cc: stable Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: aspeed: Fix probe regression

2022-11-03T15:00:18+00:00

commit 48ed32482c4100069d0c0eebdc6b198c6ae5f71f upstream. Since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets"), the gadget devices are proper driver core devices, which caused each device to request pinmux settings: aspeed_vhub 1e6a0000.usb-vhub: Initialized virtual hub in USB2 mode aspeed-g5-pinctrl 1e6e2080.pinctrl: pin A7 already requested by 1e6a0000.usb-vhub; cannot claim for gadget.0 aspeed-g5-pinctrl 1e6e2080.pinctrl: pin-232 (gadget.0) status -22 aspeed-g5-pinctrl 1e6e2080.pinctrl: could not request pin 232 (A7) from group USB2AD on device aspeed-g5-pinctrl g_mass_storage gadget.0: Error applying setting, reverse things back The vhub driver has already claimed the pins, so prevent the gadgets from requesting them too by setting the magic of_node_reused flag. This causes the driver core to skip the mux request. Reported-by: Zev Weiss Reported-by: Jae Hyun Yoo Fixes: fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley Tested-by: Zev Weiss Tested-by: Jae Hyun Yoo Link: https://lore.kernel.org/r/20221017053006.358520-1-joel@jms.id.au Signed-off-by: Greg Kroah-Hartman

usb: gadget: uvc: fix sg handling during video encode

2022-11-03T15:00:18+00:00

commit b57b08e6f431348363adffa5b6643fe3ec9dc7fe upstream. In uvc_video_encode_isoc_sg, the uvc_request's sg list is incorrectly being populated leading to corrupt video being received by the remote end. When building the sg list the usage of buf->sg's 'dma_length' field is not correct and instead its 'length' field should be used. Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support") Cc: Signed-off-by: Jeff Vanhoof Signed-off-by: Dan Vacura Link: https://lore.kernel.org/r/20221018215044.765044-5-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: uvc: fix sg handling in error case

2022-11-03T15:00:18+00:00

commit 0a0a2760b04814428800d48281a447a7522470ad upstream. If there is a transmission error the buffer will be returned too early, causing a memory fault as subsequent requests for that buffer are still queued up to be sent. Refactor the error handling to wait for the final request to come in before reporting back the buffer to userspace for all transfer types (bulk/isoc/isoc_sg). This ensures userspace knows if the frame was successfully sent. Fixes: e81e7f9a0eb9 ("usb: gadget: uvc: add scatter gather support") Cc: Signed-off-by: Dan Vacura Link: https://lore.kernel.org/r/20221018215044.765044-4-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: uvc: fix dropped frame after missed isoc

2022-11-03T15:00:18+00:00

commit 8e8e923a49967b798e7d69f1ce9eff1dd2533547 upstream. With the re-use of the previous completion status in 0d1c407b1a749 ("usb: dwc3: gadget: Return proper request status") it could be possible that the next frame would also get dropped if the current frame has a missed isoc error. Ensure that an interrupt is requested for the start of a new frame. Fixes: fc78941d8169 ("usb: gadget: uvc: decrease the interrupt load to a quarter") Cc: Signed-off-by: Dan Vacura Link: https://lore.kernel.org/r/20221018215044.765044-2-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman