kernel/linux.git/drivers/usb/gadget/function/u_ether.c, branch linux-4.20.y

usb: gadget: u_ether: fix unsafe list iteration

2018-11-28T06:46:26+00:00

list_for_each_entry_safe() is not safe for deleting entries from the list if the spin lock, which protects it, is released and reacquired during the list iteration. Fix this issue by replacing this construction with a simple check if list is empty and removing the first entry in each iteration. This is almost equivalent to a revert of the commit mentioned in the Fixes: tag. This patch fixes following issue: --->8--- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events eth_work PC is at rx_fill+0x60/0xac LR is at _raw_spin_lock_irqsave+0x50/0x5c pc : [] lr : [] psr: 80000093 sp : ee7fbee8 ip : 00000100 fp : 00000000 r10: 006000c0 r9 : c10b0ab0 r8 : ee7eb5c0 r7 : ee7eb614 r6 : ee7eb5ec r5 : 000000dc r4 : ee12ac00 r3 : ee12ac24 r2 : 00000200 r1 : 60000013 r0 : ee7eb5ec Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6d5dc04a DAC: 00000051 Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval)) Stack: (0xee7fbee8 to 0xee7fc000) ... [] (rx_fill) from [] (process_one_work+0x200/0x738) [] (process_one_work) from [] (worker_thread+0x2c/0x4c8) [] (worker_thread) from [] (kthread+0x128/0x164) [] (kthread) from [] (ret_from_fork+0x14/0x20) Exception stack(0xee7fbfb0 to 0xee7fbff8) ... ---[ end trace 64480bc835eba7d6 ]--- Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors") Signed-off-by: Marek Szyprowski Signed-off-by: Felipe Balbi

USB: Gadget Ethernet: Re-enable Jumbo frames.

2018-05-15T07:17:14+00:00

Fixes: ("net: use core MTU range checking") which patched only one of two functions used to setup the USB Gadget Ethernet driver, causing a serious performance regression in the ability to increase mtu size above 1500. Signed-off-by: John Greb Signed-off-by: Felipe Balbi

USB: gadget: function: Remove redundant license text

2017-11-07T14:45:02+00:00

Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Oliver Neukum Cc: Johan Hovold Cc: Jerry Zhang Cc: John Keeping Cc: Krzysztof Opasiak Cc: Abdulhadi Mohamed Cc: Matthew Wilcox Cc: Janusz Dziedzic Acked-by: Felipe Balbi Acked-by: Michal Nazarewicz Acked-by: Laurent Pinchart Acked-by: Vincent Pelletier Signed-off-by: Greg Kroah-Hartman

USB: add SPDX identifiers to all remaining files in drivers/usb/

2017-11-04T10:48:02+00:00

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman Acked-by: Felipe Balbi Acked-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_ncm/u_ether: Move 'SKB reserve' quirk setup to u_ether

2017-08-18T09:29:10+00:00

That quirk is required to make USB Ethernet gadget working on HW that can't cope with unaligned DMA. For some reason only f_ncm sets up that quirk, let's setup it directly in u_ether so other network models would have that quirk applied as well. All network models have been tested with ChipIdea UDC driver on NVIDIA Tegra20 SoC that require DMA to be aligned. Signed-off-by: Dmitry Osipenko Signed-off-by: Felipe Balbi

usb: gadget: u_ether: conditionally align transfer size

2017-04-11T07:58:21+00:00

Unless HW sets quirk_ep_out_aligned_size, gadget driver shouldn't make any efforts towards aligning transfers. If the UDC needs, it *must* set the quirk flag. Signed-off-by: Felipe Balbi

usb: gadget: u_ether: use better list accessors

2017-04-11T07:58:20+00:00

We have helpers for some of these, let's rely on them instead of open coding what they do in u_ether.c Signed-off-by: Felipe Balbi

usb: gadget: ether: Add \n to each attribute of ethernet functions

2017-01-24T09:04:07+00:00

Generally in SysFS and ConfigFS files are new line terminated. Also most of USB functions adds a trailing newline to each attribute. Let's follow this convention also in ethernet functions. Signed-off-by: Krzysztof Opasiak Signed-off-by: Felipe Balbi

Merge tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2016-12-13T19:10:36+00:00

Pull USB/PHY updates from Greg KH: "Here's the big set of USB/PHY patches for 4.10-rc1. A number of new drivers are here in this set of changes. We have a new USB controller type "mtu3", a new usb-serial driver, and the usual churn in the gadget subsystem and the xhci host controller driver, along with a few other new small drivers added. And lots of little other changes all over the USB and PHY driver tree. Full details are in the shortlog All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (309 commits) USB: serial: option: add dlink dwm-158 USB: serial: option: add support for Telit LE922A PIDs 0x1040, 0x1041 USB: OHCI: nxp: fix code warnings USB: OHCI: nxp: remove useless extern declaration USB: OHCI: at91: remove useless extern declaration usb: misc: rio500: fix result type for error message usb: mtu3: fix U3 port link issue usb: mtu3: enable auto switch from U3 to U2 usbip: fix warning in vhci_hcd_probe/lockdep_init_map usb: core: usbport: Use proper LED API to fix potential crash usbip: add missing compile time generated files to .gitignore usb: hcd.h: construct hub class request constants from simpler constants USB: OHCI: ohci-pxa27x: remove useless functions USB: OHCI: omap: remove useless extern declaration USB: OHCI: ohci-omap: remove useless functions USB: OHCI: ohci-s3c2410: remove useless functions USB: cdc-acm: add device id for GW Instek AFG-125 fsl/usb: Workarourd for USB erratum-A005697 usb: hub: Wait for connection to be reestablished after port reset usbip: vudc: Refactor init_vudc_hw() to be more obvious ...

Merge tag 'usb-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2016-11-18T15:02:15+00:00

Felipe writes: usb: patches for v4.10 merge window One big merge this time with a total of 166 non-merge commits. Most of the work, by far, is on dwc2 this time (68.2%) with dwc3 a far second (22.5%). The remaining 9.3% are scattered on gadget drivers. The most important changes for dwc2 are the peripheral side DMA support implemented by Synopsys folks and support for the new IOT dwc2 compatible core from Synopsys. In dwc3 land we have support for high-bandwidth, high-speed isochronous endpoints and some non-critical fixes for large scatter lists. Apart from these, we have our usual set of cleanups, non-critical fixes, etc.