kernel/linux.git/drivers/usb/dwc3/debugfs.c, branch v6.19.11

usb: dwc3: Refactor dwc3_mode_show

2025-09-06T13:21:59+00:00

Use dwc3_mode_string as the single source of truth for mode-to-string conversion. Signed-off-by: Kuen-Han Tsai Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20250822092411.173519-2-khtsai@google.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: debugfs: Resume dwc3 before accessing registers

2023-05-13T08:56:22+00:00

When the dwc3 device is runtime suspended, various required clocks are in disabled state and it is not guaranteed that access to any registers would work. Depending on the SoC glue, a register read could be as benign as returning 0 or be fatal enough to hang the system. In order to prevent such scenarios of fatal errors, make sure to resume dwc3 then allow the function to proceed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org #3.2: 30332eeefec8: debugfs: regset32: Add Runtime PM support Signed-off-by: Udipto Goswami Reviewed-by: Johan Hovold Tested-by: Johan Hovold Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: add several registers dump for debugfs

2023-03-23T18:19:23+00:00

Add 5 missing register dump for debugfs as they are in use now. Signed-off-by: Li Jun Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/1679043328-13425-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman

USB: dwc3: fix memory leak with using debugfs_lookup()

2023-02-06T12:46:41+00:00

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Note, the root dentry for the debugfs directory for the device needs to be saved so we don't have to keep looking it up, which required a bit more refactoring to properly create and remove it when needed. Reported-by: Bruce Chen Reported-by: Cixi Geng Tested-by: Cixi Geng Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230202152820.2409908-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

USB: dwc3: remove debugfs root dentry storage

2021-06-10T17:57:21+00:00

There is no need to keep around the debugfs "root" directory for the dwc3 device. Instead, look it up anytime we need to find it. This will help when callers get out-of-order and we had the potential to have a "stale" pointer around for the root dentry, as has happened in the past. Tested-by: Jack Pham Reviewed-by: Peter Chen Acked-by: Felipe Balbi Link: https://lore.kernel.org/r/20210609093924.3293230-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: debugfs: Add and remove endpoint dirs dynamically

2021-06-02T14:42:17+00:00

The DWC3 DebugFS directory and files are currently created once during probe. This includes creation of subdirectories for each of the gadget's endpoints. This works fine for peripheral-only controllers, as dwc3_core_init_mode() calls dwc3_gadget_init() just prior to calling dwc3_debugfs_init(). However, for dual-role controllers, dwc3_core_init_mode() will instead call dwc3_drd_init() which is problematic in a few ways. First, the initial state must be determined, then dwc3_set_mode() will have to schedule drd_work and by then dwc3_debugfs_init() could have already been invoked. Even if the initial mode is peripheral, dwc3_gadget_init() happens after the DebugFS files are created, and worse so if the initial state is host and the controller switches to peripheral much later. And secondly, even if the gadget endpoints' debug entries were successfully created, if the controller exits peripheral mode, its dwc3_eps are freed so the debug files would now hold stale references. So it is best if the DebugFS endpoint entries are created and removed dynamically at the same time the underlying dwc3_eps are. Do this by calling dwc3_debugfs_create_endpoint_dir() as each endpoint is created, and conversely remove the DebugFS entry when the endpoint is freed. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Reviewed-by: Peter Chen Signed-off-by: Jack Pham Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: fix incorrect kernel-doc comment syntax in files

2021-04-02T13:20:51+00:00

The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. There are certain files in drivers/usb/dwc3, which follow this syntax, but the content inside does not comply with kernel-doc. Such lines were probably not meant for kernel-doc parsing, but are parsed due to the presence of kernel-doc like comment syntax(i.e, '/**'), which causes unexpected warnings from kernel-doc. E.g., presence of kernel-doc like comment in drivers/usb/dwc3/io.h at header causes this warnings by kernel-doc: "warning: expecting prototype for h(). Prototype was for __DRIVERS_USB_DWC3_IO_H() instead" Similarly for other files too. Provide a simple fix by replacing such occurrences with general comment format, i.e. '/*', to prevent kernel-doc from parsing it. Acked-by: Randy Dunlap Signed-off-by: Aditya Srivastava Link: https://lore.kernel.org/r/20210329135108.27128-1-yashsri421@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Create helper function getting MDWIDTH

2021-03-28T12:07:18+00:00

Different controller IPs check different HW parameters for MDWIDTH. To help with maintainability, create a helper function to consolidate the logic in a single place. Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/456329d36e8c188df5c234f3282595b630bf1470.1616892233.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: debugfs: do not queue work if try to change mode on non-drd

2020-10-02T06:57:42+00:00

Do not try to queue a drd work for change mode if the port is not a drd, this is to avoid below kernel dump: [ 60.115529] ------------[ cut here ]------------ [ 60.120166] WARNING: CPU: 1 PID: 627 at kernel/workqueue.c:1473 __queue_work+0x46c/0x520 [ 60.128254] Modules linked in: [ 60.131313] CPU: 1 PID: 627 Comm: sh Not tainted 5.7.0-rc4-00022-g914a586-dirty #135 [ 60.139054] Hardware name: NXP i.MX8MQ EVK (DT) [ 60.143585] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 60.148376] pc : __queue_work+0x46c/0x520 [ 60.152385] lr : __queue_work+0x314/0x520 [ 60.156393] sp : ffff8000124ebc40 [ 60.159705] x29: ffff8000124ebc40 x28: ffff800011808018 [ 60.165018] x27: ffff800011819ef8 x26: ffff800011d39980 [ 60.170331] x25: ffff800011808018 x24: 0000000000000100 [ 60.175643] x23: 0000000000000013 x22: 0000000000000001 [ 60.180955] x21: ffff0000b7c08e00 x20: ffff0000b6c31080 [ 60.186267] x19: ffff0000bb99bc00 x18: 0000000000000000 [ 60.191579] x17: 0000000000000000 x16: 0000000000000000 [ 60.196891] x15: 0000000000000000 x14: 0000000000000000 [ 60.202202] x13: 0000000000000000 x12: 0000000000000000 [ 60.207515] x11: 0000000000000000 x10: 0000000000000040 [ 60.212827] x9 : ffff800011d55460 x8 : ffff800011d55458 [ 60.218138] x7 : ffff0000b7800028 x6 : 0000000000000000 [ 60.223450] x5 : ffff0000b7800000 x4 : 0000000000000000 [ 60.228762] x3 : ffff0000bb997cc0 x2 : 0000000000000001 [ 60.234074] x1 : 0000000000000000 x0 : ffff0000b6c31088 [ 60.239386] Call trace: [ 60.241834] __queue_work+0x46c/0x520 [ 60.245496] queue_work_on+0x6c/0x90 [ 60.249075] dwc3_set_mode+0x48/0x58 [ 60.252651] dwc3_mode_write+0xf8/0x150 [ 60.256489] full_proxy_write+0x5c/0xa8 [ 60.260327] __vfs_write+0x18/0x40 [ 60.263729] vfs_write+0xdc/0x1c8 [ 60.267045] ksys_write+0x68/0xf0 [ 60.270360] __arm64_sys_write+0x18/0x20 [ 60.274286] el0_svc_common.constprop.0+0x68/0x160 [ 60.279077] do_el0_svc+0x20/0x80 [ 60.282394] el0_sync_handler+0x10c/0x178 [ 60.286403] el0_sync+0x140/0x180 [ 60.289716] ---[ end trace 70b155582e2b7988 ]--- Signed-off-by: Li Jun Signed-off-by: Felipe Balbi

usb: dwc3: debugfs: fix checkpatch warnings

2020-10-02T06:43:35+00:00

no functional changes Signed-off-by: Felipe Balbi