kernel/linux.git/drivers/usb/dwc3/debugfs.c, branch linux-6.0.y

USB: dwc3: remove debugfs root dentry storage

2021-06-10T17:57:21+00:00

There is no need to keep around the debugfs "root" directory for the dwc3 device. Instead, look it up anytime we need to find it. This will help when callers get out-of-order and we had the potential to have a "stale" pointer around for the root dentry, as has happened in the past. Tested-by: Jack Pham Reviewed-by: Peter Chen Acked-by: Felipe Balbi Link: https://lore.kernel.org/r/20210609093924.3293230-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: debugfs: Add and remove endpoint dirs dynamically

2021-06-02T14:42:17+00:00

The DWC3 DebugFS directory and files are currently created once during probe. This includes creation of subdirectories for each of the gadget's endpoints. This works fine for peripheral-only controllers, as dwc3_core_init_mode() calls dwc3_gadget_init() just prior to calling dwc3_debugfs_init(). However, for dual-role controllers, dwc3_core_init_mode() will instead call dwc3_drd_init() which is problematic in a few ways. First, the initial state must be determined, then dwc3_set_mode() will have to schedule drd_work and by then dwc3_debugfs_init() could have already been invoked. Even if the initial mode is peripheral, dwc3_gadget_init() happens after the DebugFS files are created, and worse so if the initial state is host and the controller switches to peripheral much later. And secondly, even if the gadget endpoints' debug entries were successfully created, if the controller exits peripheral mode, its dwc3_eps are freed so the debug files would now hold stale references. So it is best if the DebugFS endpoint entries are created and removed dynamically at the same time the underlying dwc3_eps are. Do this by calling dwc3_debugfs_create_endpoint_dir() as each endpoint is created, and conversely remove the DebugFS entry when the endpoint is freed. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Reviewed-by: Peter Chen Signed-off-by: Jack Pham Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: fix incorrect kernel-doc comment syntax in files

2021-04-02T13:20:51+00:00

The opening comment mark '/**' is used for highlighting the beginning of kernel-doc comments. There are certain files in drivers/usb/dwc3, which follow this syntax, but the content inside does not comply with kernel-doc. Such lines were probably not meant for kernel-doc parsing, but are parsed due to the presence of kernel-doc like comment syntax(i.e, '/**'), which causes unexpected warnings from kernel-doc. E.g., presence of kernel-doc like comment in drivers/usb/dwc3/io.h at header causes this warnings by kernel-doc: "warning: expecting prototype for h(). Prototype was for __DRIVERS_USB_DWC3_IO_H() instead" Similarly for other files too. Provide a simple fix by replacing such occurrences with general comment format, i.e. '/*', to prevent kernel-doc from parsing it. Acked-by: Randy Dunlap Signed-off-by: Aditya Srivastava Link: https://lore.kernel.org/r/20210329135108.27128-1-yashsri421@gmail.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Create helper function getting MDWIDTH

2021-03-28T12:07:18+00:00

Different controller IPs check different HW parameters for MDWIDTH. To help with maintainability, create a helper function to consolidate the logic in a single place. Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/456329d36e8c188df5c234f3282595b630bf1470.1616892233.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: debugfs: do not queue work if try to change mode on non-drd

2020-10-02T06:57:42+00:00

Do not try to queue a drd work for change mode if the port is not a drd, this is to avoid below kernel dump: [ 60.115529] ------------[ cut here ]------------ [ 60.120166] WARNING: CPU: 1 PID: 627 at kernel/workqueue.c:1473 __queue_work+0x46c/0x520 [ 60.128254] Modules linked in: [ 60.131313] CPU: 1 PID: 627 Comm: sh Not tainted 5.7.0-rc4-00022-g914a586-dirty #135 [ 60.139054] Hardware name: NXP i.MX8MQ EVK (DT) [ 60.143585] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 60.148376] pc : __queue_work+0x46c/0x520 [ 60.152385] lr : __queue_work+0x314/0x520 [ 60.156393] sp : ffff8000124ebc40 [ 60.159705] x29: ffff8000124ebc40 x28: ffff800011808018 [ 60.165018] x27: ffff800011819ef8 x26: ffff800011d39980 [ 60.170331] x25: ffff800011808018 x24: 0000000000000100 [ 60.175643] x23: 0000000000000013 x22: 0000000000000001 [ 60.180955] x21: ffff0000b7c08e00 x20: ffff0000b6c31080 [ 60.186267] x19: ffff0000bb99bc00 x18: 0000000000000000 [ 60.191579] x17: 0000000000000000 x16: 0000000000000000 [ 60.196891] x15: 0000000000000000 x14: 0000000000000000 [ 60.202202] x13: 0000000000000000 x12: 0000000000000000 [ 60.207515] x11: 0000000000000000 x10: 0000000000000040 [ 60.212827] x9 : ffff800011d55460 x8 : ffff800011d55458 [ 60.218138] x7 : ffff0000b7800028 x6 : 0000000000000000 [ 60.223450] x5 : ffff0000b7800000 x4 : 0000000000000000 [ 60.228762] x3 : ffff0000bb997cc0 x2 : 0000000000000001 [ 60.234074] x1 : 0000000000000000 x0 : ffff0000b6c31088 [ 60.239386] Call trace: [ 60.241834] __queue_work+0x46c/0x520 [ 60.245496] queue_work_on+0x6c/0x90 [ 60.249075] dwc3_set_mode+0x48/0x58 [ 60.252651] dwc3_mode_write+0xf8/0x150 [ 60.256489] full_proxy_write+0x5c/0xa8 [ 60.260327] __vfs_write+0x18/0x40 [ 60.263729] vfs_write+0xdc/0x1c8 [ 60.267045] ksys_write+0x68/0xf0 [ 60.270360] __arm64_sys_write+0x18/0x20 [ 60.274286] el0_svc_common.constprop.0+0x68/0x160 [ 60.279077] do_el0_svc+0x20/0x80 [ 60.282394] el0_sync_handler+0x10c/0x178 [ 60.286403] el0_sync+0x140/0x180 [ 60.289716] ---[ end trace 70b155582e2b7988 ]--- Signed-off-by: Li Jun Signed-off-by: Felipe Balbi

usb: dwc3: debugfs: fix checkpatch warnings

2020-10-02T06:43:35+00:00

no functional changes Signed-off-by: Felipe Balbi

usb: dwc3: Replace HTTP links with HTTPS ones

2020-07-15T14:33:51+00:00

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Link: https://lore.kernel.org/r/20200711135804.19735-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman

USB: ch9: add "USB_" prefix in front of TEST defines

2020-06-24T13:01:24+00:00

For some reason, the TEST_ defines in the usb/ch9.h files did not have the USB_ prefix on it, making it a bit confusing when reading the file, as well as not the nicest thing to do in a uapi file. So fix that up and add the USB_ prefix on to them, and fix up all in-kernel usages. This included deleting the duplicate copy in the net2272.h file. Cc: Felipe Balbi Cc: Michal Simek Cc: Mathias Nyman Cc: Pawel Laszczak Cc: YueHaibing Cc: Nathan Chancellor Cc: Jason Yan Cc: Jia-Ju Bai Cc: Stephen Boyd Cc: Christophe JAILLET Cc: Arnd Bergmann Cc: Jules Irenge Cc: Alan Stern Cc: Thinh Nguyen Cc: Rob Gill Cc: Macpaul Lin Acked-by: Minas Harutyunyan Acked-by: Bin Liu Acked-by: Chunfeng Yun Acked-by: Peter Chen Link: https://lore.kernel.org/r/20200618144206.2655890-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Get MDWIDTH for DWC_usb32

2020-05-25T08:09:41+00:00

DWC_usb32 supports MDWIDTH value larger than 255 and up to 1023. The field HWPARAMS6[9:8] stores the upper 2-bit values of the DWC_usb32's MDWIDTH. Check that parameter and properly get the MDWIDTH for DWC_usb32. Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi

usb: dwc3: create debugfs directory under usb root

2019-11-14T03:14:54+00:00

Now the USB gadget subsystem can use the USB debugfs root directory, so move dwc3's directory from the root of the debugfs filesystem into the root of usb Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1573541519-28488-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman