kernel/linux.git/drivers/usb/core, branch v6.6.134

usb: quirks: add DELAY_INIT quirk for another Silicon Motion flash drive

2026-04-11T12:19:29+00:00

commit dd36014ec6042f424ef51b923e607772f7502ee7 upstream. Another Silicon Motion flash drive also randomly work incorrectly (lsusb does not list the device) on Huawei hisi platforms during 500 reboot cycles, and the DELAY_INIT quirk fixes this issue. Signed-off-by: Miao Li Cc: stable Link: https://patch.msgid.link/20260319053927.264840-1-limiao870622@163.com Signed-off-by: Greg Kroah-Hartman

USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam

2026-04-11T12:19:27+00:00

commit 8b7a42ecdcdeb55580d9345412f7f8fc5aca3f6c upstream. The Razer Kiyo Pro (1532:0e05) is a USB 3.0 UVC webcam whose firmware does not handle USB Link Power Management transitions reliably. When LPM is active, the device can enter a state where it fails to respond to control transfers, producing EPIPE (-32) errors on UVC probe control SET_CUR requests. In the worst case, the stalled endpoint triggers an xHCI stop-endpoint command that times out, causing the host controller to be declared dead and every USB device on the bus to be disconnected. This has been reported as Ubuntu Launchpad Bug #2061177. The failure mode is: 1. UVC probe control SET_CUR returns -32 (EPIPE) 2. xHCI host not responding to stop endpoint command 3. xHCI host controller not responding, assume dead 4. All USB devices on the affected xHCI controller disconnect Disabling LPM prevents the firmware from entering the problematic low- power states that precede the stall. This is the same approach used for other webcams with similar firmware issues (e.g., Logitech HD Webcam C270). Cc: stable Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2061177 Signed-off-by: JP Hein Link: https://patch.msgid.link/20260331003806.212565-2-jp@jphein.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

usb: core: new quirk to handle devices with zero configurations

2026-04-02T11:07:16+00:00

[ Upstream commit 9f6a983cfa22ac662c86e60816d3a357d4b551e9 ] Some USB devices incorrectly report bNumConfigurations as 0 in their device descriptor, which causes the USB core to reject them during enumeration. logs: usb 1-2: device descriptor read/64, error -71 usb 1-2: no configurations usb 1-2: can't read configurations, error -22 However, these devices actually work correctly when treated as having a single configuration. Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices. When this quirk is set, assume the device has 1 configuration instead of failing with -EINVAL. This quirk is applied to the device with VID:PID 5131:2007 which exhibits this behavior. Signed-off-by: Jie Deng Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: core: Limit the length of unkillable synchronous timeouts

2026-03-25T10:05:49+00:00

commit 1015c27a5e1a63efae2b18a9901494474b4d1dc3 upstream. The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout. Signed-off-by: Alan Stern Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Link: https://patch.msgid.link/15fc9773-a007-47b0-a703-df89a8cf83dd@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: usbcore: Introduce usb_bulk_msg_killable()

2026-03-25T10:05:49+00:00

commit 416909962e7cdf29fd01ac523c953f37708df93d upstream. The synchronous message API in usbcore (usb_control_msg(), usb_bulk_msg(), and so on) uses uninterruptible waits. However, drivers may call these routines in the context of a user thread, which means it ought to be possible to at least kill them. For this reason, introduce a new usb_bulk_msg_killable() function which behaves the same as usb_bulk_msg() except for using wait_for_completion_killable_timeout() instead of wait_for_completion_timeout(). The same can be done later for usb_control_msg() later on, if it turns out to be needed. Signed-off-by: Alan Stern Suggested-by: Oliver Neukum Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") CC: stable@vger.kernel.org Link: https://patch.msgid.link/248628b4-cc83-4e81-a620-3ce4e0376d41@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: core: don't power off roothub PHYs if phy_set_mode() fails

2026-03-25T10:05:49+00:00

commit e293015ba76eb96ce4ebed7e3b2cb1a7d319f3e9 upstream. Remove the error path from the usb_phy_roothub_set_mode() function. The code is clearly wrong, because phy_set_mode() calls can't be balanced with phy_power_off() calls. Additionally, the usb_phy_roothub_set_mode() function is called only from usb_add_hcd() before it powers on the PHYs, so powering off those makes no sense anyway. Presumably, the code is copy-pasted from the phy_power_on() function without adjusting the error handling. Cc: stable@vger.kernel.org # v5.1+ Fixes: b97a31348379 ("usb: core: comply to PHY framework") Signed-off-by: Gabor Juhos Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/20260218-usb-phy-poweroff-fix-v1-1-66e6831e860e@gmail.com Signed-off-by: Greg Kroah-Hartman

USB: ezcap401 needs USB_QUIRK_NO_BOS to function on 10gbs usb speed

2026-03-25T10:05:49+00:00

commit d0d9b1f4f5391e6a00cee81d73ed2e8f98446d5f upstream. Add USB_QUIRK_NO_BOS for ezcap401 capture card, without it dmesg will show "unable to get BOS descriptor or descriptor too short" and "unable to read config index 0 descriptor/start: -71" errors and device will not able to work at full speed at 10gbs Signed-off-by: Vyacheslav Vahnenko Cc: stable Link: https://patch.msgid.link/20260313123638.20481-1-vahnenko2003@gmail.com Signed-off-by: Greg Kroah-Hartman

usb/core/quirks: Add Huawei ME906S-device to wakeup quirk

2026-03-25T10:05:49+00:00

commit 0326ff28d56b4fa202de36ffc8462a354f383a64 upstream. Similar to other Huawei LTE modules using this quirk, this version with another vid/pid suffers from spurious wakeups. Setting the quirk fixes the issue for this device as well. Cc: stable Signed-off-by: Christoffer Sandberg Signed-off-by: Werner Sembach Link: https://patch.msgid.link/20260306172817.2098898-1-wse@tuxedocomputers.com Signed-off-by: Greg Kroah-Hartman

USB: add QUIRK_NO_BOS for video capture several devices

2026-03-25T10:05:48+00:00

commit 93cd0d664661f58f7e7bed7373714ab2ace41734 upstream. Several USB capture devices also need the USB_QUIRK_NO_BOS set for them to work properly, odds are they are all the same chip inside, just different vendor/product ids. This fixes up: - ASUS TUF 4K PRO - Avermedia Live Gamer Ultra 2.1 (GC553G2) - UGREEN 35871 to now run at full speed (10 Gbps/4K 60 fps mode.) Link: https://lore.kernel.org/r/CACy+XB-f-51xGpNQFCSm5pE_momTQLu=BaZggHYU1DiDmFX=ug@mail.gmail.com Cc: stable Signed-off-by: A1RM4X Signed-off-by: Greg Kroah-Hartman

usb: core: add USB_QUIRK_NO_BOS for devices that hang on BOS descriptor

2026-01-30T09:27:27+00:00

commit 2740ac33c87b3d0dfa022efd6ba04c6261b1abbd upstream. Add USB_QUIRK_NO_BOS quirk flag to skip requesting the BOS descriptor for devices that cannot handle it. Add Elgato 4K X (0fd9:009b) to the quirk table. This device hangs when the BOS descriptor is requested at SuperSpeed Plus (10Gbps). Link: https://bugzilla.kernel.org/show_bug.cgi?id=220027 Cc: stable Signed-off-by: Johannes Brüderl Link: https://patch.msgid.link/20251207090220.14807-1-johannes.bruederl@gmail.com Signed-off-by: Greg Kroah-Hartman