kernel/linux.git/drivers/usb/core, branch v5.2.16

usb: hcd: use managed device resources

2019-09-06T08:23:40+00:00

commit 76da906ad727048a74bb8067031ee99fc070c7da upstream. Using managed device resources in usb_hcd_pci_probe() allows devm usage for resource subranges, such as the mmio resource for the platform device created to control host/device mode mux, which is a xhci extended capability, and sits inside the xhci mmio region. If managed device resources are not used then "parent" resource is released before subrange at driver removal as .remove callback is called before the devres list of resources for this device is walked and released. This has been observed with the xhci extended capability driver causing a use-after-free which is now fixed. An additional nice benefit is that error handling on driver initialisation is simplified much. Signed-off-by: Carsten Schmid Tested-by: Carsten Schmid Reviewed-by: Mathias Nyman Fixes: fa31b3cb2ae1 ("xhci: Add Intel extended cap / otg phy mux handling") Cc: # v4.19+ Link: https://lore.kernel.org/r/1566569488679.31808@mentor.com Signed-off-by: Greg Kroah-Hartman

usb: setup authorized_default attributes using usb_bus_notify

2019-08-25T14:10:35+00:00

commit 27709ae4e2fe6cf7da2ae45e718e190c5433342b upstream. Currently, the authorized_default and interface_authorized_default attributes for HCD are set up after the uevent has been sent to userland. This creates a race condition where userland may fail to access this file when processing the event. Move the appending of these attributes earlier relying on the usb_bus_notify dispatcher. Signed-off-by: Thiébaud Weksteen Cc: stable Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.com Signed-off-by: Greg Kroah-Hartman

USB: CDC: fix sanity checks in CDC union parser

2019-08-25T14:10:35+00:00

commit 54364278fb3cabdea51d6398b07c87415065b3fc upstream. A few checks checked for the size of the pointer to a structure instead of the structure itself. Copy & paste issue presumably. Fixes: e4c6fb7794982 ("usbnet: move the CDC parser into USB core") Cc: stable Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

USB: core: Fix races in character device registration and deregistraion

2019-08-25T14:10:34+00:00

commit 303911cfc5b95d33687d9046133ff184cf5043ff upstream. The syzbot fuzzer has found two (!) races in the USB character device registration and deregistration routines. This patch fixes the races. The first race results from the fact that usb_deregister_dev() sets usb_minors[intf->minor] to NULL before calling device_destroy() on the class device. This leaves a window during which another thread can allocate the same minor number but will encounter a duplicate name error when it tries to register its own class device. A typical error message in the system log would look like: sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0' The patch fixes this race by destroying the class device first. The second race is in usb_register_dev(). When that routine runs, it first allocates a minor number, then drops minor_rwsem, and then creates the class device. If the device creation fails, the minor number is deallocated and the whole routine returns an error. But during the time while minor_rwsem was dropped, there is a window in which the minor number is allocated and so another thread can successfully open the device file. Typically this results in use-after-free errors or invalid accesses when the other thread closes its open file reference, because the kernel then tries to release resources that were already deallocated when usb_register_dev() failed. The patch fixes this race by keeping minor_rwsem locked throughout the entire routine. Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com Signed-off-by: Alan Stern CC: Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.org Signed-off-by: Greg Kroah-Hartman

usb: usbfs: fix double-free of usb memory upon submiturb error

2019-08-16T08:10:52+00:00

commit c43f28dfdc4654e738aa6d3fd08a105b2bee758d upstream. Upon an error within proc_do_submiturb(), dec_usb_memory_use_count() gets called once by the error handling tail and again by free_async(). Remove the first call. Signed-off-by: Gavin Li Acked-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/20190804235044.22327-1-gavinli@thegavinli.com Signed-off-by: Greg Kroah-Hartman

usb: core: hub: Disable hub-initiated U1/U2

2019-07-31T05:24:30+00:00

[ Upstream commit 561759292774707b71ee61aecc07724905bb7ef1 ] If the device rejects the control transfer to enable device-initiated U1/U2 entry, then the device will not initiate U1/U2 transition. To improve the performance, the downstream port should not initate transition to U1/U2 to avoid the delay from the device link command response (no packet can be transmitted while waiting for a response from the device). If the device has some quirks and does not implement U1/U2, it may reject all the link state change requests, and the downstream port may resend and flood the bus with more requests. This will affect the device performance even further. This patch disables the hub-initated U1/U2 if the device-initiated U1/U2 entry fails. Reference: USB 3.2 spec 7.2.4.2.3 Signed-off-by: Thinh Nguyen Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: Handle USB3 remote wakeup for LPM enabled devices correctly

2019-07-26T07:11:10+00:00

commit e244c4699f859cf7149b0781b1894c7996a8a1df upstream. With Link Power Management (LPM) enabled USB3 links transition to low power U1/U2 link states from U0 state automatically. Current hub code detects USB3 remote wakeups by checking if the software state still shows suspended, but the link has transitioned from suspended U3 to enabled U0 state. As it takes some time before the hub thread reads the port link state after a USB3 wake notification, the link may have transitioned from U0 to U1/U2, and wake is not detected by hub code. Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup handling This patch should be added to stable kernels since 4.13 where LPM was kept enabled during suspend/resume Cc: # v4.13+ Signed-off-by: Lee, Chiasheng Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

signal/usb: Replace kill_pid_info_as_cred with kill_pid_usb_asyncio

2019-07-26T07:11:01+00:00

commit 70f1b0d34bdf03065fe869e93cc17cad1ea20c4a upstream. The usb support for asyncio encoded one of it's values in the wrong field. It should have used si_value but instead used si_addr which is not present in the _rt union member of struct siginfo. The practical result of this is that on a 64bit big endian kernel when delivering a signal to a 32bit process the si_addr field is set to NULL, instead of the expected pointer value. This issue can not be fixed in copy_siginfo_to_user32 as the usb usage of the the _sigfault (aka si_addr) member of the siginfo union when SI_ASYNCIO is set is incompatible with the POSIX and glibc usage of the _rt member of the siginfo union. Therefore replace kill_pid_info_as_cred with kill_pid_usb_asyncio a dedicated function for this one specific case. There are no other users of kill_pid_info_as_cred so this specialization should have no impact on the amount of code in the kernel. Have kill_pid_usb_asyncio take instead of a siginfo_t which is difficult and error prone, 3 arguments, a signal number, an errno value, and an address enconded as a sigval_t. The encoding of the address as a sigval_t allows the code that reads the userspace request for a signal to handle this compat issue along with all of the other compat issues. Add BUILD_BUG_ONs in kernel/signal.c to ensure that we can now place the pointer value at the in si_pid (instead of si_addr). That is the code now verifies that si_pid and si_addr always occur at the same location. Further the code veries that for native structures a value placed in si_pid and spilling into si_uid will appear in userspace in si_addr (on a byte by byte copy of siginfo or a field by field copy of siginfo). The code also verifies that for a 64bit kernel and a 32bit userspace the 32bit pointer will fit in si_pid. I have used the usbsig.c program below written by Alan Stern and slightly tweaked by me to run on a big endian machine to verify the issue exists (on sparc64) and to confirm the patch below fixes the issue. /* usbsig.c -- test USB async signal delivery */ #define _GNU_SOURCE #include #include #include #include #include #include #include #include #include static struct usbdevfs_urb urb; static struct usbdevfs_disconnectsignal ds; static volatile sig_atomic_t done = 0; void urb_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p urb: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &urb); printf("%s\n", (info->si_addr == &urb) ? "Good" : "Bad"); } void ds_handler(int sig, siginfo_t *info , void *ucontext) { printf("Got signal %d, signo %d errno %d code %d addr: %p ds: %p\n", sig, info->si_signo, info->si_errno, info->si_code, info->si_addr, &ds); printf("%s\n", (info->si_addr == &ds) ? "Good" : "Bad"); done = 1; } int main(int argc, char **argv) { char *devfilename; int fd; int rc; struct sigaction act; struct usb_ctrlrequest *req; void *ptr; char buf[80]; if (argc != 2) { fprintf(stderr, "Usage: usbsig device-file-name\n"); return 1; } devfilename = argv[1]; fd = open(devfilename, O_RDWR); if (fd == -1) { perror("Error opening device file"); return 1; } act.sa_sigaction = urb_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR1, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } act.sa_sigaction = ds_handler; sigemptyset(&act.sa_mask); act.sa_flags = SA_SIGINFO; rc = sigaction(SIGUSR2, &act, NULL); if (rc == -1) { perror("Error in sigaction"); return 1; } memset(&urb, 0, sizeof(urb)); urb.type = USBDEVFS_URB_TYPE_CONTROL; urb.endpoint = USB_DIR_IN | 0; urb.buffer = buf; urb.buffer_length = sizeof(buf); urb.signr = SIGUSR1; req = (struct usb_ctrlrequest *) buf; req->bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; req->bRequest = USB_REQ_GET_DESCRIPTOR; req->wValue = htole16(USB_DT_DEVICE << 8); req->wIndex = htole16(0); req->wLength = htole16(sizeof(buf) - sizeof(*req)); rc = ioctl(fd, USBDEVFS_SUBMITURB, &urb); if (rc == -1) { perror("Error in SUBMITURB ioctl"); return 1; } rc = ioctl(fd, USBDEVFS_REAPURB, &ptr); if (rc == -1) { perror("Error in REAPURB ioctl"); return 1; } memset(&ds, 0, sizeof(ds)); ds.signr = SIGUSR2; ds.context = &ds; rc = ioctl(fd, USBDEVFS_DISCSIGNAL, &ds); if (rc == -1) { perror("Error in DISCSIGNAL ioctl"); return 1; } printf("Waiting for usb disconnect\n"); while (!done) { sleep(1); } close(fd); return 0; } Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: Alan Stern Cc: Oliver Neukum Fixes: v2.3.39 Cc: stable@vger.kernel.org Acked-by: Alan Stern Signed-off-by: "Eric W. Biederman" Signed-off-by: Greg Kroah-Hartman

USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.

2019-06-05T09:52:42+00:00

This patch fixes the chipmunk-like voice that manifets randomly when using the integrated mic of the Logitech Webcam HD C270. The issue was solved initially for this device by commit 2394d67e446b ("USB: add RESET_RESUME for webcams shown to be quirky") but it was then reintroduced by e387ef5c47dd ("usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams"). This patch is to have the fix back. Signed-off-by: Marco Zatta Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: Add LPM quirk for Surface Dock GigE adapter

2019-05-21T08:08:56+00:00

Without USB_QUIRK_NO_LPM ethernet will not work and rtl8152 will complain with r8152 : Stop submitting intr, status -71 Adding the quirk resolves this. As the dock is externally powered, this should not have any drawbacks. Signed-off-by: Maximilian Luz Cc: stable Signed-off-by: Greg Kroah-Hartman