kernel/linux.git/drivers/usb/core, branch v5.15.7

USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub

2021-12-08T08:04:55+00:00

commit d2a004037c3c6afd36d40c384d2905f47cd51c57 upstream. This is another branded 8153 device that doesn't work well with LPM: r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71 Disable LPM to resolve the issue. Signed-off-by: Ole Ernst Cc: stable Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com Signed-off-by: Greg Kroah-Hartman

usb: hub: Fix locking issues with address0_mutex

2021-12-01T08:04:40+00:00

commit 6cca13de26eea6d32a98d96d916a048d16a12822 upstream. Fix the circular lock dependency and unbalanced unlock of addess0_mutex introduced when fixing an address0_mutex enumeration retry race in commit ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Make sure locking order between port_dev->status_lock and address0_mutex is correct, and that address0_mutex is not unlocked in hub_port_connect "done:" codepath which may be reached without locking address0_mutex Fixes: 6ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Cc: Reported-by: Marek Szyprowski Tested-by: Hans de Goede Tested-by: Marek Szyprowski Acked-by: Hans de Goede Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: hub: Fix usb enumeration issue due to address0 race

2021-12-01T08:04:40+00:00

commit 6ae6dc22d2d1ce6aa77a6da8a761e61aca216f8b upstream. xHC hardware can only have one slot in default state with address 0 waiting for a unique address at a time, otherwise "undefined behavior may occur" according to xhci spec 5.4.3.4 The address0_mutex exists to prevent this across both xhci roothubs. If hub_port_init() fails, it may unlock the mutex and exit with a xhci slot in default state. If the other xhci roothub calls hub_port_init() at this point we end up with two slots in default state. Make sure the address0_mutex protects the slot default state across hub_port_init() retries, until slot is addressed or disabled. Note, one known minor case is not fixed by this patch. If device needs to be reset during resume, but fails all hub_port_init() retries in usb_reset_and_verify_device(), then it's possible the slot is still left in default state when address0_mutex is unlocked. Cc: Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20211115221630.871204-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

Revert "usb: core: hcd: Add support for deferring roothub registration"

2021-11-06T13:13:30+00:00

This reverts commit 58877b0824da15698bd85a0a9dbfa8c354e6ecb7. It has been reported to be causing problems in Arch and Fedora bug reports. Reported-by: Hans de Goede Link: https://bbs.archlinux.org/viewtopic.php?pid=2000956#p2000956 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019542 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2019576 Link: https://lore.kernel.org/r/42bcbea6-5eb8-16c7-336a-2cb72e71bc36@redhat.com Cc: Mathias Nyman Cc: Chris Chiu Cc: Alan Stern Cc: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: Modularize HCD stop configuration in usb_stop_hcd()

2021-09-14T08:41:30+00:00

No functional change. Since configuration to stop HCD is invoked from multiple places, group all of them in usb_stop_hcd(). Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-4-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

usb: core: hcd: Add support for deferring roothub registration

2021-09-14T08:41:30+00:00

It has been observed with certain PCIe USB cards (like Inateck connected to AM64 EVM or J7200 EVM) that as soon as the primary roothub is registered, port status change is handled even before xHC is running leading to cold plug USB devices not detected. For such cases, registering both the root hubs along with the second HCD is required. Add support for deferring roothub registration in usb_add_hcd(), so that both primary and secondary roothubs are registered along with the second HCD. CC: stable@vger.kernel.org # 5.4+ Suggested-by: Mathias Nyman Tested-by: Chris Chiu Acked-by: Alan Stern Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210909064200.16216-2-kishon@ti.com Signed-off-by: Greg Kroah-Hartman

Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"

2021-07-21T09:36:34+00:00

This reverts commit 0bd860493f81eb2a46173f6f5e44cc38331c8dbd. While the patch was working as stated,ie preventing the L850-GL LTE modem from crashing on some U3 wake-ups due to a race condition between the host wake-up and the modem-side wake-up, when using the MBIM interface, this would force disabling the USB runtime PM on the device. The increased power consumption is significant for LTE laptops, and given that with decently recent modem firmwares, when the modem hits the bug, it automatically recovers (ie it drops from the bus, but automatically re-enumerates after less than half a second, rather than being stuck until a power cycle as it was doing with ancient firmware), for most people, the trade-off now seems in favor of re-enabling it by default. For people with access to the platform code, the bug can also be worked-around successfully by changing the USB3 LFPM polling off-time for the XHCI controller in the BIOS code. Signed-off-by: Vincent Palatin Link: https://lore.kernel.org/r/20210721092516.2775971-1-vpalatin@chromium.org Fixes: 0bd860493f81 ("USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem") Signed-off-by: Greg Kroah-Hartman

usb: hub: Disable USB 3 device initiated lpm if exit latency is too high

2021-07-21T07:11:22+00:00

The device initiated link power management U1/U2 states should not be enabled in case the system exit latency plus one bus interval (125us) is greater than the shortest service interval of any periodic endpoint. This is the case for both U1 and U2 sytstem exit latencies and link states. See USB 3.2 section 9.4.9 "Set Feature" for more details Note, before this patch the host and device initiated U1/U2 lpm states were both enabled with lpm. After this patch it's possible to end up with only host inititated U1/U2 lpm in case the exit latencies won't allow device initiated lpm. If this case we still want to set the udev->usb3_lpm_ux_enabled flag so that sysfs users can see the link may go to U1/U2. Signed-off-by: Mathias Nyman Cc: stable Link: https://lore.kernel.org/r/20210715150122.1995966-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: hub: Fix link power management max exit latency (MEL) calculations

2021-07-21T07:11:19+00:00

Maximum Exit Latency (MEL) value is used by host to know how much in advance it needs to start waking up a U1/U2 suspended link in order to service a periodic transfer in time. Current MEL calculation only includes the time to wake up the path from U1/U2 to U0. This is called tMEL1 in USB 3.1 section C 1.5.2 Total MEL = tMEL1 + tMEL2 +tMEL3 + tMEL4 which should additinally include: - tMEL2 which is the time it takes for PING message to reach device - tMEL3 time for device to process the PING and submit a PING_RESPONSE - tMEL4 time for PING_RESPONSE to traverse back upstream to host. Add the missing tMEL2, tMEL3 and tMEL4 to MEL calculation. Cc: # v3.5 Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20210715150122.1995966-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

USB: core: Fix incorrect pipe calculation in do_proc_control()

2021-07-12T18:59:40+00:00

When the user submits a control URB via usbfs, the user supplies the bRequestType value and the kernel uses it to compute the pipe value. However, do_proc_control() performs this computation incorrectly in the case where the bRequestType direction bit is set to USB_DIR_IN and the URB's transfer length is 0: The pipe's direction is also set to IN but it should be OUT, which is the direction the actual transfer will use regardless of bRequestType. Commit 5cc59c418fde ("USB: core: WARN if pipe direction != setup packet direction") added a check to compare the direction bit in the pipe value to a control URB's actual direction and to WARN if they are different. This can be triggered by the incorrect computation mentioned above, as found by syzbot. This patch fixes the computation, thus avoiding the WARNing. Reported-and-tested-by: syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman