kernel/linux.git/drivers/usb/core, branch linux-5.9.y

USB: add RESET_RESUME quirk for Snapscan 1212

2020-12-21T12:28:19+00:00

commit 08a02f954b0def3ada8ed6d4b2c7bcb67e885e9c upstream. I got reports that some models of this old scanner need this when using runtime PM. Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20201207130323.23857-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

USB: quirks: Add USB_QUIRK_DISCONNECT_SUSPEND quirk for Lenovo A630Z TIO built-in usb-audio card

2020-12-02T07:52:01+00:00

commit 9ca57518361418ad5ae7dc38a2128fbf4855e1a2 upstream. Add a USB_QUIRK_DISCONNECT_SUSPEND quirk for the Lenovo TIO built-in usb-audio. when A630Z going into S3,the system immediately wakeup 7-8 seconds later by usb-audio disconnect interrupt to avoids the issue. eg dmesg: .... [ 626.974091 ] usb 7-1.1: USB disconnect, device number 3 .... .... [ 1774.486691] usb 7-1.1: new full-speed USB device number 5 using xhci_hcd [ 1774.947742] usb 7-1.1: New USB device found, idVendor=17ef, idProduct=a012, bcdDevice= 0.55 [ 1774.956588] usb 7-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1774.964339] usb 7-1.1: Product: Thinkcentre TIO24Gen3 for USB-audio [ 1774.970999] usb 7-1.1: Manufacturer: Lenovo [ 1774.975447] usb 7-1.1: SerialNumber: 000000000000 [ 1775.048590] usb 7-1.1: 2:1: cannot get freq at ep 0x1 ....... Seeking a better fix, we've tried a lot of things, including: - Check that the device's power/wakeup is disabled - Check that remote wakeup is off at the USB level - All the quirks in drivers/usb/core/quirks.c e.g. USB_QUIRK_RESET_RESUME, USB_QUIRK_RESET, USB_QUIRK_IGNORE_REMOTE_WAKEUP, USB_QUIRK_NO_LPM. but none of that makes any difference. There are no errors in the logs showing any suspend/resume-related issues. When the system wakes up due to the modem, log-wise it appears to be a normal resume. Introduce a quirk to disable the port during suspend when the modem is detected. Signed-off-by: penghao Link: https://lore.kernel.org/r/20201118123039.11696-1-penghao@uniontech.com Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: core: Fix regression in Hercules audio card

2020-12-02T07:52:01+00:00

commit 184eead057cc7e803558269babc1f2cfb9113ad1 upstream. Commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") aimed to make the USB stack more reliable by detecting and skipping over endpoints that are duplicated between interfaces. This caused a regression for a Hercules audio card (reported as Bugzilla #208357), which contains such non-compliant duplications. Although the duplications are harmless, skipping the valid endpoints prevented the device from working. This patch fixes the regression by adding ENDPOINT_IGNORE quirks for the Hercules card, telling the kernel to ignore the invalid duplicate endpoints and thereby allowing the valid endpoints to be used as intended. Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") CC: Reported-by: Alexander Chalikiopoulos Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20201119170040.GA576844@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: core: Change %pK for __user pointers to %px

2020-12-02T07:52:01+00:00

commit f3bc432aa8a7a2bfe9ebb432502be5c5d979d7fe upstream. Commit 2f964780c03b ("USB: core: replace %p with %pK") used the %pK format specifier for a bunch of __user pointers. But as the 'K' in the specifier indicates, it is meant for kernel pointers. The reason for the %pK specifier is to avoid leaks of kernel addresses, but when the pointer is to an address in userspace the security implications are minimal. In particular, no kernel information is leaked. This patch changes the __user %pK specifiers (used in a bunch of debugging output lines) to %px, which will always print the actual address with no mangling. (Notably, there is no printk format specifier particularly intended for __user pointers.) Fixes: 2f964780c03b ("USB: core: replace %p with %pK") CC: Vamsi Krishna Samavedam CC: Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20201119170228.GB576844@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: Add NO_LPM quirk for Kingston flash drive

2020-11-10T11:39:09+00:00

commit afaa2e745a246c5ab95103a65b1ed00101e1bc63 upstream. In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston flash drive spontaneously disconnects and reconnects, over and over. Testing revealed that disabling Link Power Management for the drive fixed the problem. This patch adds a quirk entry for that drive to turn off LPM permanently. CC: Hans de Goede CC: Reported-and-tested-by: Julien Humbert Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usbcore: Check both id_table and match() when both available

2020-11-05T10:51:39+00:00

commit 0942d59b0af46511d59dbf5bd69ec4a64d1a854c upstream. From: Bastien Nocera When a USB device driver has both an id_table and a match() function, make sure to check both to find a match, first matching the id_table, then checking the match() function. This makes it possible to have module autoloading done through the id_table when devices are plugged in, before checking for further device eligibility in the match() function. Cc: # 5.8 Cc: Greg Kroah-Hartman Cc: Alan Stern Co-developed-by: M. Vefa Bicakci Tested-by: Bastien Nocera Signed-off-by: Bastien Nocera Signed-off-by: M. Vefa Bicakci Tested-by: Pan (Pany) YUAN Link: https://lore.kernel.org/r/20201022135521.375211-2-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman

usb: core: Solve race condition in anchor cleanup functions

2020-10-29T09:12:20+00:00

[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ] usb_kill_anchored_urbs() is commonly used to cancel all URBs on an anchor just before releasing resources which the URBs rely on. By doing so, users of this function rely on that no completer callbacks will take place from any URB on the anchor after it returns. However if this function is called in parallel with __usb_hcd_giveback_urb processing a URB on the anchor, the latter may call the completer callback after usb_kill_anchored_urbs() returns. This can lead to a kernel panic due to use after release of memory in interrupt context. The race condition is that __usb_hcd_giveback_urb() first unanchors the URB and then makes the completer callback. Such URB is hence invisible to usb_kill_anchored_urbs(), allowing it to return before the completer has been called, since the anchor's urb_list is empty. Even worse, if the racing completer callback resubmits the URB, it may remain in the system long after usb_kill_anchored_urbs() returns. Hence list_empty(&anchor->urb_list), which is used in the existing while-loop, doesn't reliably ensure that all URBs of the anchor are gone. A similar problem exists with usb_poison_anchored_urbs() and usb_scuttle_anchored_urbs(). This patch adds an external do-while loop, which ensures that all URBs are indeed handled before these three functions return. This change has no effect at all unless the race condition occurs, in which case the loop will busy-wait until the racing completer callback has finished. This is a rare condition, so the CPU waste of this spinning is negligible. The additional do-while loop relies on usb_anchor_check_wakeup(), which returns true iff the anchor list is empty, and there is no __usb_hcd_giveback_urb() in the system that is in the middle of the unanchor-before-complete phase. The @suspend_wakeups member of struct usb_anchor is used for this purpose, which was introduced to solve another problem which the same race condition causes, in commit 6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done"). The surely_empty variable is necessary, because usb_anchor_check_wakeup() must be called with the lock held to prevent races. However the spinlock must be released and reacquired if the outer loop spins with an empty URB list while waiting for the unanchor-before-complete passage to finish: The completer callback may very well attempt to take the very same lock. To summarize, using usb_anchor_check_wakeup() means that the patched functions can return only when the anchor's list is empty, and there is no invisible URB being processed. Since the inner while loop finishes on the empty list condition, the new do-while loop will terminate as well, except for when the said race condition occurs. Signed-off-by: Eli Billauer Acked-by: Oliver Neukum Acked-by: Alan Stern Link: https://lore.kernel.org/r/20200731054650.30644-1-eli.billauer@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usbcore/driver: Accommodate usbip

2020-09-25T14:53:02+00:00

Commit 88b7381a939d ("USB: Select better matching USB drivers when available") inadvertently broke usbip functionality. The commit in question allows USB device drivers to be explicitly matched with USB devices via the use of driver-provided identifier tables and match functions, which is useful for a specialised device driver to be chosen for a device that can also be handled by another, more generic, device driver. Prior, the USB device section of usb_device_match() had an unconditional "return 1" statement, which allowed user-space to bind USB devices to the usbip_host device driver, if desired. However, the aforementioned commit changed the default/fallback return value to zero. This breaks device drivers such as usbip_host, so this commit restores the legacy behaviour, but only if a device driver does not have an id_table and a match() function. In addition, if usb_device_match is called for a device driver and device pair where the device does not match the id_table of the device driver in question, then the device driver will be disqualified for the device. This allows avoiding the default case of "return 1", which prevents undesirable probe() calls to a driver even though its id_table did not match the device. Finally, this commit changes the specialised-driver-to-generic-driver transition code so that when a device driver returns -ENODEV, a more generic device driver is only considered if the current device driver does not have an id_table and a match() function. This ensures that "generic" drivers such as usbip_host will not be considered specialised device drivers and will not cause the device to be locked in to the generic device driver, when a more specialised device driver could be tried. All of these changes restore usbip functionality without regressions, ensure that the specialised/generic device driver selection logic works as expected with the usb and apple-mfi-fastcharge drivers, and do not negatively affect the use of devices provided by dummy_hcd. Fixes: 88b7381a939d ("USB: Select better matching USB drivers when available") Cc: # 5.8 Cc: Bastien Nocera Cc: Valentina Manea Cc: Shuah Khan Cc: Greg Kroah-Hartman Cc: Alan Stern Cc: Tested-by: Andrey Konovalov Acked-by: Shuah Khan Signed-off-by: M. Vefa Bicakci Link: https://lore.kernel.org/r/20200922110703.720960-5-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman

usbcore/driver: Fix incorrect downcast

2020-09-25T14:53:02+00:00

This commit resolves a minor bug in the selection/discovery of more specific USB device drivers for devices that are currently bound to generic USB device drivers. The bug is related to the way a candidate USB device driver is compared against the generic USB device driver. The code in is_dev_usb_generic_driver() assumes that the device driver in question is a USB device driver by calling to_usb_device_driver(dev->driver) to downcast; however I have observed that this assumption is not always true, through code instrumentation. This commit avoids the incorrect downcast altogether by comparing the USB device's driver (i.e., dev->driver) to the generic USB device driver directly. This method was suggested by Alan Stern. This bug was found while investigating Andrey Konovalov's report indicating usbip device driver misbehaviour with the recently merged generic USB device driver selection feature. The report is linked below. Fixes: d5643d2249b2 ("USB: Fix device driver race") Cc: # 5.8 Cc: Greg Kroah-Hartman Cc: Alan Stern Cc: Bastien Nocera Cc: Shuah Khan Cc: Valentina Manea Cc: Tested-by: Andrey Konovalov Signed-off-by: M. Vefa Bicakci Link: https://lore.kernel.org/r/20200922110703.720960-4-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman

usbcore/driver: Fix specific driver selection

2020-09-25T14:52:49+00:00

This commit resolves a bug in the selection/discovery of more specific USB device drivers for devices that are currently bound to generic USB device drivers. The bug is in the logic that determines whether a device currently bound to a generic USB device driver should be re-probed by a more specific USB device driver or not. The code in __usb_bus_reprobe_drivers() used to have the following lines: if (usb_device_match_id(udev, new_udriver->id_table) == NULL && (!new_udriver->match || new_udriver->match(udev) != 0)) return 0; ret = device_reprobe(dev); As the reader will notice, the code checks whether the USB device in consideration matches the identifier table (id_table) of a specific USB device_driver (new_udriver), followed by a similar check, but this time with the USB device driver's match function. However, the match function's return value is not checked correctly. When match() returns zero, it means that the specific USB device driver is *not* applicable to the USB device in question, but the code then goes on to reprobe the device with the new USB device driver under consideration. All this to say, the logic is inverted. This bug was found by code inspection and instrumentation while investigating the root cause of the issue reported by Andrey Konovalov, where usbip took over syzkaller's virtual USB devices in an undesired manner. The report is linked below. Fixes: d5643d2249b2 ("USB: Fix device driver race") Cc: # 5.8 Cc: Greg Kroah-Hartman Cc: Alan Stern Cc: Bastien Nocera Cc: Shuah Khan Cc: Valentina Manea Cc: Tested-by: Andrey Konovalov Signed-off-by: M. Vefa Bicakci Link: https://lore.kernel.org/r/20200922110703.720960-3-m.v.b@runbox.com Signed-off-by: Greg Kroah-Hartman