kernel/linux.git/drivers/usb/core, branch linux-4.20.y

usb: hub: delay hub autosuspend if USB3 port is still link training

2019-02-12T19:02:14+00:00

[ Upstream commit e86108940e541febf35813402ff29fa6f4a9ac0b ] When initializing a hub we want to give a USB3 port in link training the same debounce delay time before autosuspening the hub as already trained, connected enabled ports. USB3 ports won't reach the enabled state with "current connect status" and "connect status change" bits set until the USB3 link training finishes. Catching the port in link training (polling) and adding the debounce delay prevents unnecessary failed attempts to autosuspend the hub. Signed-off-by: Mathias Nyman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: leds: fix regression in usbport led trigger

2019-01-31T07:15:35+00:00

commit 91f7d2e89868fcac0e750a28230fdb1ad4512137 upstream. The patch "usb: simplify usbport trigger" together with "leds: triggers: add device attribute support" caused an regression for the usbport trigger. it will no longer enumerate any active usb hub ports under the "ports" directory in the sysfs class directory, if the usb host drivers are fully initialized before the usbport trigger was loaded. The reason is that the usbport driver tries to register the sysfs entries during the activate() callback. And this will fail with -2 / ENOENT because the patch "leds: triggers: add device attribute support" made it so that the sysfs "ports" group was only being added after the activate() callback succeeded. This version of the patch reverts parts of the "usb: simplify usbport trigger" patch and restores usbport trigger's functionality. Fixes: 6f7b0bad8839 ("usb: simplify usbport trigger") Signed-off-by: Christian Lamparter Cc: stable Acked-by: Jacek Anaszewski Signed-off-by: Greg Kroah-Hartman

USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB

2019-01-16T21:03:23+00:00

commit 3483254b89438e60f719937376c5e0ce2bc46761 upstream. To match the Corsair Strafe RGB, the Corsair K70 RGB also requires USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues discussed here: https://github.com/ckb-next/ckb-next/issues/42. Otherwise roughly 1 in 10 boots the keyboard will fail to be detected. Patch that applied delay control quirk for Corsair Strafe RGB: cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20") Previous K70 RGB patch to add delay-init quirk: 7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards") Signed-off-by: Jack Stocker Cc: stable Signed-off-by: Greg Kroah-Hartman

usbcore: Select only first configuration for non-UAC3 compliant devices

2019-01-16T21:03:20+00:00

commit ff2a8c532c14fd22fb26a36574d9ff199afbbe54 upstream. In most of the UAC1 and UAC2 audio devices, the first configuration is most often the best configuration. However, with recent patch to support UAC3 configuration, second configuration was unintentionally chosen for some of the UAC1/2 devices that had more than one configuration. This was because of the existing check after the audio config check which selected any config which had a non-vendor class. This patch fixes this issue. Fixes: f13912d3f014 ("usbcore: Select UAC3 configuration for audio if present") Reported-by: Con Kolivas Signed-off-by: Saranya Gopal Tested-by: Con Kolivas Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: check usb_get_extra_descriptor for proper size

2018-12-05T20:20:14+00:00

When reading an extra descriptor, we need to properly check the minimum and maximum size allowed, to prevent from invalid data being sent by a device. Reported-by: Hui Peng Reported-by: Mathias Payer Co-developed-by: Linus Torvalds Signed-off-by: Hui Peng Signed-off-by: Mathias Payer Signed-off-by: Linus Torvalds Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device

2018-12-05T09:37:29+00:00

Some lower volume SanDisk Ultra Flair in 16GB, which the VID:PID is in 0781:5591, will aggressively request LPM of U1/U2 during runtime, when using this thumb drive as the OS installation key we found the device will generate failure during U1 exit path making it dropped from the USB bus, this causes a corrupted installation in system at the end. i.e., [ 166.918296] hub 2-0:1.0: state 7 ports 7 chg 0000 evt 0004 [ 166.918327] usb usb2-port2: link state change [ 166.918337] usb usb2-port2: do warm reset [ 166.970039] usb usb2-port2: not warm reset yet, waiting 50ms [ 167.022040] usb usb2-port2: not warm reset yet, waiting 200ms [ 167.276043] usb usb2-port2: status 02c0, change 0041, 5.0 Gb/s [ 167.276050] usb 2-2: USB disconnect, device number 2 [ 167.276058] usb 2-2: unregistering device [ 167.276060] usb 2-2: unregistering interface 2-2:1.0 [ 167.276170] xhci_hcd 0000:00:15.0: shutdown urb ffffa3c7cc695cc0 ep1in-bulk [ 167.284055] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 167.284064] sd 0:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 33 04 90 00 01 00 00 ... Analyzed the USB trace in the link layer we realized it is because of the 6-ms timer of tRecoveryConfigurationTimeout which documented on the USB 3.2 Revision 1.0, the section 7.5.10.4.2 of "Exit from Recovery.Configuration"; device initiates U1 exit -> Recovery.Active -> Recovery.Configuration, then the host timer timeout makes the link transits to eSS.Inactive -> Rx.Detect follows by a Warm Reset. Interestingly, the other higher volume of SanDisk Ultra Flair sharing the same VID:PID, such as 64GB, would not request LPM during runtime, it sticks at U0 always, thus disabling LPM does not affect those thumb drives at all. The same odd occures in SanDisk Ultra Fit 16GB, VID:PID in 0781:5583. Signed-off-by: Harry Pan Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: Fix invalid-free bug in port_over_current_notify()

2018-12-05T09:37:29+00:00

Syzbot and KASAN found the following invalid-free bug in port_over_current_notify(): -------------------------------------------------------------------------- BUG: KASAN: double-free or invalid-free in port_over_current_notify drivers/usb/core/hub.c:5192 [inline] BUG: KASAN: double-free or invalid-free in port_event drivers/usb/core/hub.c:5241 [inline] BUG: KASAN: double-free or invalid-free in hub_event+0xd97/0x4140 drivers/usb/core/hub.c:5384 CPU: 1 PID: 32710 Comm: kworker/1:3 Not tainted 4.20.0-rc3+ #129 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_invalid_free+0x64/0xa0 mm/kasan/report.c:336 __kasan_slab_free+0x13a/0x150 mm/kasan/kasan.c:501 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 port_over_current_notify drivers/usb/core/hub.c:5192 [inline] port_event drivers/usb/core/hub.c:5241 [inline] hub_event+0xd97/0x4140 drivers/usb/core/hub.c:5384 process_one_work+0xc90/0x1c40 kernel/workqueue.c:2153 worker_thread+0x17f/0x1390 kernel/workqueue.c:2296 kthread+0x35a/0x440 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 -------------------------------------------------------------------------- The problem is caused by use of a static array to store environment-string pointers. When the routine is called by multiple threads concurrently, the pointers from one thread can overwrite those from another. The solution is to use an ordinary automatic array instead of a static array. Signed-off-by: Alan Stern Reported-by: syzbot+98881958e1410ec7e53c@syzkaller.appspotmail.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series

2018-11-26T07:09:47+00:00

Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by: Michael Niewöhner Tested-by: Michael Niewöhner Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: core: Fix hub port connection events lost

2018-11-14T22:28:26+00:00

This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset only if a device is was attached to the hub port before resetting the hub port. Using a Lenovo T480s attached to the ultra dock it was not possible to detect some usb-c devices at the dock usb-c ports because the hub_port_reset code will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset. Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit. This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the new device was attached such that it was not detected. This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is currently no device attached to the port before the hub port reset. This will avoid clearing the connection bit for new attached devices. Signed-off-by: Dennis Wassenberg Acked-by: Mathias Nyman Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: quirks: Add no-lpm quirk for Raydium touchscreens

2018-11-07T12:23:18+00:00

Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng Cc: stable Signed-off-by: Greg Kroah-Hartman